Why is my airbag light not coming on?
Sensors can fail or be tripped on accident to cause the airbag warning to illuminate. The sensors will need to be checked and the system will need to be reset. The airbag clock spring is there to maintain continuity between the electrical wiring of the vehicle and the driver-side airbag.
How do you fix the SRS light?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
Why is my Tacoma 4WD light not going on?
Make sure your vacuum lines are hooked up and/or don’t have any vacuum leaks. Some stuff. Not a lot, just some. I have a 03 Tacoma V6 AT, push button 4WD. The 4wd is not engaging, and the light is not going on.
Is the push button 4WD on a Tacoma V6?
I have a 03 Tacoma V6 AT, push button 4WD. The 4wd is not engaging, and the light is not going on. Could you help me troubleshoot this problem?
What does the blinking 4 wheel drive indicator mean?
So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
Why is the front wheel not connecting on my Tacoma?
What you described indicates the front axle is connecting if you spin one wheel and the other wheel spins in the opposite direction. When I spin one wheel, the other wheel is not affected. Some stuff. Not a lot, just some. When I spin one wheel, the other wheel is not affected. Click to expand…