Why does traction control come on on my Yukon Denali?

2004 Yukon Denali came home with wife yesterday. Scraping noise from the front drivers side hub. Turns out that the hub nut need to be tightened. Not sure why but ok. The scraping continued to the end of the driveway and has not returned. After taking care of that, the ABS warning light and the Traction Control warning came on at the same time.

Are there any problems with GMC Yukon Denali?

Problems With the Traction Control on a 2006 Yukon. The 2006 GMC or Cadillac Yukon Denali has a recall, technical service bulletins (TSB) and safety reports about the stability control on the SUV. The stability control on the Yukon assists the driver in controlling the vehicle during skids or unstable steering conditions.

Why is my GMC Yukon hard to steer?

Once this incorrect information is sent to the Yukon’s computer and the stability control attempts to correct the steering control of the SUV, the Yukon driver will find the GMC hard to steer. The tire pressure regulator must be replaced in order to correct this stability control problem.

What is the stability control on a Yukon?

The stability control on the Yukon assists the driver in controlling the vehicle during skids or unstable steering conditions. The problems with the stability control in the Yukon prevents the operator from having this assistance.

Why does my Yukon Denali lose all power?

My 2003 Yukon Denali with 60,000 miles is acting funny. When starting from a dead stop, it sometimes loses all power and the message “TRACTION ACTIVE” shows up on the instrument panel where the odometer and other data are usually displayed. The dealer is baffled.

Are there any recalls on GMC Yukon Denali?

The 2006 GMC or Cadillac Yukon Denali has a recall, technical service bulletins (TSB) and safety reports about the stability control on the SUV. Read more: Problems With the Traction Control on a 2006 Yukon | eHow.com http://www.ehow.com/list_7635921_problem… http://www.ehow.com/list_7635921_problem… Was this answer helpful?

What’s the problem with GMC Yukon Denali traction control?

Hi I have a 2003 XL Denali. I too have the same problem the Traction Active engages cutting the power to the truck. Numerous trips to the dealer has not fixed the problem. But in reading all the posts and your recent post I will be printing them and taking them with me.and telling them to service the sensors.

Why does the light keep coming on on my Denali?

On my Denali, the gas cap was tight but the light still kept coming on intermittently. It turns out that there was a tiny crack in the rubber ring on the gas cap that forms the seal between the gas cap and the filler neck. A new gas cap solved the problem.

Why does my GMC Yukon make a buzzing noise?

When I push the drivers heated seat button, the odd time their is a loud buzzing noise thats appears causing the rear passenger door drivers side light to come on then the heated seat shuts off. Definitly a wiring issue again numerous trips to the dealer and no luck..

Why does my GMC Yukon roll to a complete stop?

When traveling at low speeds, less than 5 mph, the brake pedal will become hard to push and car will not come to a complete stop, but will roll to a stop.

Where to get brakes replaced on 2015 GMC Yukon?

The contact owns a 2015 GMC Yukon. While driving at an unknown speed, the ABS and brake warning indicators illuminated. The vehicle was taken to Buick GMC of kirkland (12335 120th ave ne, kirkland, wa 98034, (877) 505-6211) where it was diagnosed that the front driver and passenger side wheel speed sensors needed to be replaced.

Why does my Yukon Denali make scraping noise?

Thanks everyone. 2004 Yukon Denali came home with wife yesterday. Scraping noise from the front drivers side hub. Turns out that the hub nut need to be tightened. Not sure why but ok. The scraping continued to the end of the driveway and has not returned.

Is there a transmission mount on the drivers side?

There is a transmission mount on the drivers side. In my opinion those transmissions are crap. Has it got ATF+4 fluid in it?. (Should have)If you have disconnected the battery for any reason the trans will need time to relearn or may require a “quick learn with a scan tool” . Maybe even a reflash.

Are there transmission problems in the GMC Yukon?

The transmission that is in the gmc’s 4L60E & 4L65E have weakness in the 3-4 clutches. I am fairly confident that is your problem. You are looking at a rebuild. I’m sorry to hear about your transmission.

When did GMC Yukon SLT need to be replaced?

I got a 2002 yukon slt with a 4L60E tranny that had to be replaced around 85k miles. Im the 2nd owner and purchased when it had 67k miles. Previous owner stated they never used 4WD.

Who is the owner of the 2004 GMC Yukon?

2004 GMC Yukon Denali/Yukon XL Denali Owner ManualM GENERAL MOTORS, GM, the GM Emblem, GMC, the GMC Truck Emblem and the names YUKON and DENALI are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

How many miles does GMC Yukon XL Denali have?

I have a 2001 Yukon XL Denali that has just over 130,000 miles. I love the vehicle. It has taken basic maintainence–brakes, oil, tires, and a couple of years ago about $3000 in repairs. Other than that it’s great. But just came looking for some info on starting problems.

What’s the price of a 2004 GMC Yukon?

The Used 2004 GMC Yukon Denali is priced between $11,900 and $11,900 with odometer readings between 136108 and 136108 miles. Shop with Edmunds for perks and special offers on used cars, trucks, and SUVs near Ashburn, VA. Doing so could save you hundreds or thousands of dollars.

What happens when the dash lights go off in a GMC Yukon?

It does not go completely black instantly. It ‘dims’ similar to the way the dimmer switch would, slowly, and usually ends up the way the dimmer would be if it was all the way to the bottom, where everything is almost completely black. The only thing i can barely see is the gear selector shows very dimly.

How can you tell if your ABS system is bad?

The most common sign of an issue with the ABS system is the ABS Light coming on. The ABS Light will show an amber color, and is the equivalent of a Check Engine Light, except it is only to diagnose problems with the ABS system.

What happens when the ABS control module fails?

Unresponsive brake pedal In certain cases, depending on the model of vehicle, when the ABS module fails, the brake pedal may become unresponsive. This is an obvious problem, as an unresponsive brake pedal will not stop a vehicle, or will not be able to do so in an adequately safe manner. In most cases, this will happen slowly, over time.

What happens when ABS is disabled in a car?

(When ABS is disabled, you should still have normal braking, just without the antilock action.)

Why is my hydraulic brake system not working?

I would call this a safety issue, I don’t agree with the dealer there at all. Your conventional (hydraulic) brake system should be working OK but you don’t have ABS or stability control, the vehicle was designed to have these systems active.

How does traction control and ABS work together?

Where traction control maintains traction while accelerating and ABS does the same for braking, electronic stability systems compare the vehicle’s trajectory to where the driver seems to want it to go and brakes individual wheels to keep it on course.

Why is my traction control light coming on?

If the hub nut was loose, then it is possible the rotor was rubbing against the brake shield. As far as the ABS and Traction Control light coming on, I am having the same problem. Mine started out as just the lights coming on and loosing power. If i selected the stability button disable, then I would regain power.

Why does my GMC Yukon XL traction control not work?

It seems that the general consensus is that the speed sensors on the front wheels are corroded and that this gives the computer a faulty signal about the actual speed of each wheel, thereby engaging the traction control. The solution is to clean the sensors.

Where do the ABS lines go on a 2002 suburban?

2002 Suburban w/4wal abs. looking for the diagram for which 2002 Suburban w/4wal abs. looking for the diagram for which lines go where … read more adam warren Master auto tec 236 satisfied customers 2004 yukon xl slt – stability/traction plumbing. Looking at Looking at module from the front, bottom left goes to MC proportional valve rear input.

Where do the brake lines go on a Yukon XL?

2004 yukon xl slt – stability/traction plumbing. Looking at Looking at module from the front, bottom left goes to MC proportional valve rear input. Bottom right goes to front MCPV input. Top two on the right go to the rear brakes.

Which is the rear port on a GM master cylinder?

GM Mechanic: GM Master Denny, GM Master Tech replied 9 years ago the rear port on master cylinder is the primary. Ask Your Own GM Question Was this answer helpful? Yes No

When does the ABS light come on on a GMC Yukon?

Your GMC Yukon’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Yukon does not have Anti-Lock brakes, and the safety they provide. Your Yukon’s ABS system uses a system of sensors to determine wheel speed when braking.

What does the brake light on a Yukon mean?

The brake light indicates that there is a problem with the physical braking system and that your Yukon is unsafe to drive. Yes, you can drive your Yukon with the ABS light on.

What to do when your abs light comes on after a wheel bearing is replaced?

If you have an ABS light on after wheel bearing replaced, you may have to also replace the other wheel bearing hub. Car makers sometimes install the toothed tone ring inside the wheel bearing hub and mount the wheel speed sensor on the outside of the hub.

What causes a GMC Yukon to lose its Stabilitrak system?

There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Yukon will no longer be able to tell if all of the wheels are turning at the same speed.

Why does traction control come on when braking?

After taking care of that, the ABS warning light and the Traction Control warning came on at the same time. When driving, the traction control comes on and will not allow more than 10-15 MPH. When braking, the antilock kicks in with pulsating braking. So braking is a problem, as is driving.

When did service stability track and traction control 2008 Tahoe?

About a year ago, my 2008 Tahoe began sending “Stability Track Off, Traction Control Off, Service Stability Track, Service Traction Control”. The ABS light and another light pop up on the dash. This was happening off and on for the past 10-12 months.

Why does ABS light pop up on my Tahoe?

The ABS light and another light pop up on the dash. This was happening off and on for the past 10-12 months. Now, there are more serious problems. In order to put the transmission into gear (reverse or drive), I have to press the brake as hard as I am able into the floorboard.

When does traction control come on for no reason?

What causes a car to jerk forward when stopped?

Q: Car is jerking forward when car is stopped with brake applied. When I go to stop, my car revs up and jerks forward on me. I have it in drive and if I pumped the brakes, it really jerks me forward. I have my foot on the brake the entire time. It’s scary because I’ve almost hit someone. Thank you My car has 59266 miles.

What to do when your car jerks when braking?

Your Car Jerks When Braking: Now What? 1 Rule Out the Obvious If you’re part of the small group of car owners with a manual transmission, the occasional jerk… 2 Check Your Brakes Unsurprisingly, a car jerks when braking if there’s a problem with the brakes. Typically, brakes… 3 Inspect the ABS More

Why does my Silverado Sierra jerk at high speeds?

If you hammer it down, the truck smooths out. It appears to only happen durring light acceleration and at higher speeds. The best I can do to explain the jerking is that it feels as if is missing or being starved for fuel and about to run out. There are no check engine lights on in the truck.

Why does my car Jerk when I go from high to low gear?

If you downshift from a high gear to a lower gear — such as from fifth to second gear — your car may jerk, especially if you haven’t reduced your speed. By practicing controlled downshifts, you’ll find the problem has nothing to do with the brakes, but lies in your style of driving.

When does traction active message read out on my car?

The latest, which has lasted 18 months, thanks to an incompetent dealer (Toth Akron, Ohio) is a Traction Active message read out on the display. This happens when accelerating – usually from a stop sign.

Why does my traction control light come on when I accelerate?

Below are the top 5 causes of a traction control light coming on when you are accelerating. Wheel speed sensors are connected to your traction control system and engine control unit. These sensors are responsible for detecting the speed in which your wheels are rotating. Each wheel has its own sensor.

Why is my brake switch not working on my Yukon?

Common issue with brake switch. Not sure it goes with the warnings you are seeing. Would definitely keep you cruise control from working though. See if you can get a code when the error messages show up. Steering Wheel Position sensor is a common cause of the intermittent issues like you are seeing. Might just be a bad ground.

Why does traction control come on at the same time?

The scraping continued to the end of the driveway and has not returned. After taking care of that, the ABS warning light and the Traction Control warning came on at the same time. When driving, the traction control comes on and will not allow more than 10-15 MPH. When braking, the antilock kicks in with pulsating braking.

When did the GMC Tahoe traction control system come out?

Other than the Tahoe Limited Edition, the vehicle was redesigned for the 2000 model year on the new GMT800 platform, still shared with the full-sized pickups and SUV’s. What would cause the traction control to kick in when there isn’t any wet or icy conditions?

Navigation