Why does the fuse keep blowing on my Kia Rio?
I have an 03 Kia Rio approx 67,000 miles – The problem is that the 10amp ECU fuse keeps blowing. I am having to replace up to 5 times per journey as when the car is slowing to a standstill or is at standstill or just set off from lights, junction, roundabout, parking space etc it just blows the fuse and the car stalls.
Why does my ECU fuse keep blowing out?
Most of the time when you have a ECU fuse blowing is because one the oxygen heaters has shorted to ground. Start by unplugging the sensors and then replace the sensor when the fuse doesnt not pop anymore. Here is a guide to help you get the job done. Please let us know if you need anything else to get the problem fixed. helpful? Wow so good!
Where is the fuse for the ECU system?
You can find this fuse near your fuse box, usually on the lower right hand side of your footlight controls. Follow these step by step instructions for this method: This is an easier way of removing any long term memory saved in your car’s ECU system.
What should I do if my car fuse keeps blowing?
The important thing is to understand what is causing the fuse to keep blowing. The simple fix is often replacing the blown fuse and test the car again. If the fuse does not blow, it might be an easy fix because there was a power surge in the system.
I have an 03 Kia Rio approx 67,000 miles – The problem is that the 10amp ECU fuse keeps blowing. I am having to replace up to 5 times per journey as when the car is slowing to a standstill or is at standstill or just set off from lights, junction, roundabout, parking space etc it just blows the fuse and the car stalls.
When did the Kia Rio DC come out?
In this article, we consider the first-generation KIA Rio (DC), produced from 2000 to 2005. Here you will find fuse box diagrams of KIA Rio 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout).
Most of the time when you have a ECU fuse blowing is because one the oxygen heaters has shorted to ground. Start by unplugging the sensors and then replace the sensor when the fuse doesnt not pop anymore. Here is a guide to help you get the job done. Please let us know if you need anything else to get the problem fixed. helpful? Wow so good!
How do I reset the memory fuse on a Kia Rio?
1. Turn off the engine. 2. Turn off the headlights and tail lights. 3. Open the driver’s side panel cover and pull up the memory fuse. If the memory fuse is pulled up from the fuse panel, the warning chime, audio, clock and interior lamps, etc., will not operate. Some items must be reset after replacement. Refer to “Battery” in this section.
What are the different types of fuses for a Kia Rio?
Avoid using the system involved and immediately consult an authorized Kia dealer. Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings. WARNING – Fuse replacement. Never replace a fuse with anything but another fuse of the same rating.
Where are the fuse panels on a Kia Sorento?
This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment near the battery. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse. If a fuse has blown, the element inside the fuse will melt.
What should I do if my fuse blows on my Kia Rio?
If the replacement fuse blows, this indicates an electrical problem. Avoid using the system involved and immediately consult an authorized Kia dealer. Three kinds of fuses are used: blade type for lower amperage rating, cartridge type, and multi fuse for higher amperage ratings.
What is the relay box on a Kia Rio?
PCB Fuse & Relay Box (Start Relay), W/O Smart Key – Ignition Switch, With Smart Key – PDM Relay Box (ESCL (IG2) Relay) Purge Control Solenoid Valve, Variable Intake Solenoid Valve, Canister Close Valve, PCB Fuse & Relay Box (Cooling Fan (Low) Relay, Cooling Fan (Hi) Relay)
How do you replace a fuse on a Kia?
Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel. 4. Check the removed fuse; replace it if it is blown. 5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, consult an authorized Kia dealer.
What is the crash pad switch on a Kia Rio?
Audio, BCM, ATM Shift Lever ILL., Crash Pad Switch Instrument Cluster, Tire Pressure Monitoring Module Multipurpose Check Connector, Driver CCS Seat Warmer Module Passenger Seat Warmer Module With ISG : Crash Pad Switch, Low DC-DC Convertor