Why does the airbag light come on on my Pontiac Vibe?

The Pontiac Vibe is mechanically identical to the Toyota Matrix, including the airbag supplemental restraint system (SRS). The SRS light may come on for several reasons, such as if the electrical system has had a change in voltage, if there is a malfunction in the SRS or if the diagnostic troubleshooting code (DTC) system registers an error.

What should I do if my airbag light comes on?

Once you’re in an accident which causes the airbags to deploy, simply replacing the airbag is not enough. Crash sensors, seat belt pretensioners, and other SRS components must also be replaced. In addition, the airbag monitoring unit (the brains of the airbag system) will need to be reset.

Why does my car airbag light keep blinking?

Many people who try to do their own work, like putting in a car radio, will sometimes neglect to plug in all of the airbag components. This will cause the airbag light to blink. Resetting the light is an easy car repair you can DIY. Here are some easy steps to reset the airbag light.

Is the seat belt light the same as the airbag light?

In some model cars, the seat belt light is the same as the airbag light. This means people are familiar with seeing this light as a warning about their seat belt.

Why does the airbag light stay on in my car?

Check the airbag switch for passenger Some cars have a “passenger seat Airbag on/off button.” This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars.

Where is the button to turn off the airbag light?

This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.

Can a faulty airbag light be replaced without a scanner?

Have some painters to acts as alignment when returning the steering wheel. A faulty clocking system is one cuase a faulty airbag light. Replacement with a new one is one way you can remove the airbag light without a scanner. Next, loosen the steering nuts using a breaker bar. This ensures that you do not remove the steering wheel completely.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

How to reset an airbag light Toyota All models?

How To Reset An Airbag Light! Toyota ALL Models! – YouTube How To Reset An Airbag Light! Toyota ALL Models! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How to reset an airbag light you it still runs?

Start the engine. The SRS light should come on for seven seconds, and then shut off and stay off. The airbag light has been reset. If you continue to drive your vehicle with the SRS light illuminated, you may risk an accidental deployment of the airbag. “How To Use Automotive Diagnostic Scanners (Motorbooks Workshop)”; Martin; 2008

When does the airbag light come on in a car?

The airbag light, also known as the SRS light (supplemental restraint system), illuminates on the vehicle’s instrument panel usually only after the vehicle has been in an accident and the airbag has deployed.

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…

Do you need to reset the airbag light?

When working on the electrical components in your dash, you may find you will also need to reset the airbag light once it is all put back together. Many people who try to do their own work, like putting in a car radio, will sometimes neglect to plug in all of the airbag components. This will cause the airbag light to blink.

How to reset the SRS light for my Pontiac Vibe?

Open the hood of the car and locate the battery. Loosen the bolt holding the negative (black) battery cable to the battery terminal. Remove the negative battery cable and wait for 90 seconds. Reattach the negative battery cable. Tighten the bolt. Close the hood and start the car. After six seconds the SRS light should go off.

Is the Pontiac Vibe the same as the Toyota Matrix?

by James T Wood. The Pontiac Vibe is mechanically identical to the Toyota Matrix, including the airbag supplemental restraint system (SRS).

How do you turn off the airbag light?

The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.

What are the names of the Pontiac warning lights?

Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue). There are over 40 of them, so search carefully! Models examined include G3, G5, G6, G8, Grand Prix, Solstice, Torrent, and Vibe.

When does the airbag warning light come on?

When you start your car, the airbag warning light will turn on for a few seconds and should turn off automatically if everything is okay. If the light stays on, the computer has detected an issue and will store a code to help identify the cause.

What is the traction control warning light on a Pontiac Vibe?

I ahve a 09 pontiac vibe gt that all of a sudden got a traction control and flashing vsc light when I started it up. (Prior to moving the car) I also got a check engine light at the same time. I did p … read more 2009 Pontiac Vibe check engine light comes on, the traction control warning light and the VCS off illuminate. The OBD code P0456.

What are the warning lights on a vibe?

2009 Vibe – warning lights flashing, vsc, check engine & traction. 1 binks, the others stay on. Tried removing & My battery died and when I got jumped off everything was ok but now vsc off is flashing and check engine light is on and traction control is on too. It … read more Master Technician, Shop M…

Do you need scanner to turn off air bag light?

If your Ford Airbag light is on and you are wondering whether you need a scanner to turn it off then this will be the right video for you. Most Ford vehicles do not need any special tools to turn the airbag light off. If everything is working with the airbag system the light will turn off on its own.

Why is my airbag warning light not working?

Wet Airbag Module If your vehicle has experienced water damage, it could have affected the airbag module located under the driver and/or passenger seat. If it is shorted out or corroded, it won’t work properly.

How to turn off airbag light on Ford with no tools?

Most Ford vehicles do not need any special tools to turn the airbag light off. If everything is working with the airbag system the light will turn off on its own. We demonstrated on a 2015 Ford Fiesta Airbag light. Instagram: https://www.instagram.com/worldmechan… FACEBOOK PAGE: https://www.facebook.com/worldmechani…

How to reset the airbag light for my Pontiac Vibe?

How can I tell if my airbag sensor is working?

To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.

Put the key into the ignition and turn the switch to the “on” position. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.

Why is the airbag light on when the seat is vacant?

If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.

Why is my airbag light on but not working?

The sensors in your airbag system might wear out rendering them inoperative. via mekshat.com. The passenger occupancy and the clock spring sensors are the two most common sensors that fail. The passenger occupancy is weight sensitive to ensure that you don’t have more than the required weight on your front seat.

What does an illuminated airbag light mean?

All the same, the most important thing to know is that, an illuminated airbag light indicates a problem in the SRS system. This means that airbags might not deploy in the event of an accident. Here are the common reasons that cause your airbag light to illuminate;

Why is the airbag clock on the steering wheel?

The airbag clock springs are found on your steering wheel. Its work is to ensure continuity of the electrical wiring with the driver’s airbag. It does this by coiling itself in and out as the steering wheel turns. 2. Why is My Airbag Light On?

Navigation