Why does the airbag light come on on a Hyundai Elantra?

Your airbag light is part of your Elantra’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.

How do you turn off the airbag light on a Hyundai?

Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.

What are the trouble codes for Hyundai obd-11?

Hyundai Specific Trouble Codes OBD-11 code Fault location P1100 Manifold absolute pressure (MAP) sensor P1102 Manifold absolute pressure (MAP) sensor P1103 Manifold absolute pressure (MAP) sensor P1106 Manifold absolute pressure (MAP) sensor

What is the fault code for a Hyundai airbag?

Airbag Fault Code DTC B1101 Battery Voltage High B1102 Battery Voltage Low B1326 FIS Front Impact Sensor -Driver Short to Ground

Where are the airbag codes stored in a Hyundai?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident. The best part of having your Hyundai’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play.

What is the fault code for the Hyundai Elantra?

Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.

What happens if your Elantra loses power while driving?

Engine will still run, just won’t perform as it should. Your local Hyundai dealer should be able to scan the ECM and pick up on a trouble code for that. My 2012 Elantra just did same thing while I was on interstate and I was run off road because I could not accelerate above 20 mph.

Where are the brake lights on a Hyundai Elantra?

The most common location is the brake light switch . The good news is they are inexpensive and easy to replace. Your Elantra’s brake light switch is under the brake pedal. It ALWAYS should have power running to it, even if the key is off.

What is the fuse box diagram for a Hyundai Elantra?

Electro Chromic Mirror, A/V & Navigation Head Unit, Rear Combination Lamp (In) LH/RH, M/T – Back-Up Lamp Switch, BCM, Instrument Cluster Oxygen Sensor (UP/DOWN), Canister Close Valve, Variable Intake Solenoid Valve, Oil Control Valve #1 / #2, Purge Control Solenoid Valve, C/FAN LO Relay, C/FAN HI Relay

How to reset the airbag light on a Hyundai Elantra?

What does the diagnostic warning light on Hyundai Elantra mean?

Every time you start your Hyundai Elantra, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.

Where is the diagnostic plug on a Hyundai?

Find the diagnostic-link connector underneath the driver’s side of the car on the dashboard. Examine the shape of this receptive port and then compare it to your OBD II code reader to make sure the plug will fit into the connector. If the shapes match, plug the reader into the DLC.

When does the airbag light come on in a car?

The airbag light, also known as the SRS light (supplemental restraint system), illuminates on the vehicle’s instrument panel usually only after the vehicle has been in an accident and the airbag has deployed.

Why is my airbag light on in my Camry?

Here’s how to diagnose and fix it without the risk of near-face explosions. The work performed is on a 2004 Toyota Camry. Other cars may be different, but this represents a common case of why airbag lights may be illuminated. When working on an airbag system, exercise extreme caution.

How to reset an airbag light you it still runs?

Start the engine. The SRS light should come on for seven seconds, and then shut off and stay off. The airbag light has been reset. If you continue to drive your vehicle with the SRS light illuminated, you may risk an accidental deployment of the airbag. “How To Use Automotive Diagnostic Scanners (Motorbooks Workshop)”; Martin; 2008

How long is the warranty on the Hyundai Elantra?

3 people found this helpful. I opened the Hyundai Elantra Extended Warranty on 07/03/17 and thought, wow that was nice of Hundai to automatically extend the warranty on the clock spring and steering rubber coupling.

How can I reset the airbag light on my Hyundai?

You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.

Why does my airbag light keep coming on?

The seat sensors tell the airbag system that the seat is occupied. Some older model vehicles have a manual button to turn the passenger airbag on or off. Look under the seats to see if you can find any part of the wiring harness that has come dislodged or damaged. This is a very common reason why the airbag light comes on.

Is it safe to drive with the airbag light on?

If your vehicles airbag has gone off and been replaced, the airbag system needs reset. It won’t just work until the airbag system has been reset by a shop, or you send the module to someone who can do it for you. Is it Safe to Drive Your Elantra with the Airbag Light On? It is not as safe to drive with the airbag light on.

What does the light on the airbag mean?

When the airbag system fails this check, you’ll see the airbag light. Depending on the model year and what country you happen to be in, you may get something along the lines of SRS, a picture of a person with the airbag deployed, or the word airbag.

What happens when the airbag goes bad in an Audi?

The airbag system control unit may have gone bad. If this is the case, you can have it replaced or send for a new one. This often happens whenever you get into a fender bender that doesn’t deploy the airbag. One or more of the crash sensors may have been triggered, but not enough to deploy the airbag.

What does the Check Engine light on a Hyundai mean?

Learn how to diagnose Hyundai check engine light. This light means that the airbag system is not working properly. The airbags may not deploy if you get involved in an accident. Have the system diagnosed as soon as possible. Learn more about how to troubleshoot the Hyundai airbag system.

Is there a recall on the Hyundai Elantra?

Although Hyundai has issued a recall for certain 2011-2014 Elantra vehicles, and my vehicle meets that year range and model, the dealership will not cover replacing the airbag clock spring assembly because my VIN does not match their criteria. As such, the dealership has quoted $480 to fix my vehicle’s airbag clock spring assembly.

Why does the airbag light come on after an accident?

It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired.

How do you turn off the airbag light?

The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

What to do if your airbag light is on?

However, it is best not to drive the car if the SRS light is on. Do not drive the vehicle if the airbag light / SRS light is on. Consider using an OBD2 scanner to reset it or take your car to a professional to take care of the matter. Bonus: ABS light on: Why?

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…

What are the problems with the Hyundai airbags?

Hyundai DTC Trouble Codes DTC Description B1335 Right-hand Front Crash Sensor Wrong ID B1346 Driver Airbag Resistance Too High/Low B1346 Driver Airbag Resistance Too High B1347 Driver Airbag Resistance Too High/Low

Are there any recalls on Hyundai Elantra in Australia?

A spokesperson for Hyundai Australia has told CarAdvice of the 28 Elantra vehicles affected in Australia, four have previously been written-off, 17 have been fixed, and it is attempting to contact owners of the final seven cars. A full list of vehicle identification numbers of the 28 vehicles involved in the recall can be found here.

Are there any problems with Hyundai airbags?

Although airbags are designed to lessen the risk of injury or fatality in a car accident, some airbags have been defectively manufactured or designed, putting passengers in vehicles at increased risk of harm. Airbags deploying with no accident, deploying too late or not deploying at all are all problems that have been reported.

When does the airbag light turn on without a scanner?

Some cars have a “passenger seat Airbag on/off button.” This is the first airbag light you should check when you want to remove the airbag light without a scanner. If the light is functioning well, it should turn on when someone occupies the passenger seat.

What happens if you reset the airbag light?

You should never just reset the airbag light without repairing the problem. This can deploy the airbags or non-functioning if an accident occurs. Let a professional replace the airbag’s parts if you are not sure of how to do it. Remember always to remove the battery connection when working with airbags.

Is it possible to reset the airbag light without a scanner?

Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem. In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals.

Why does the airbag light stay on in my car?

Check the airbag switch for passenger Some cars have a “passenger seat Airbag on/off button.” This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars.

Where is the button to turn off the airbag light?

This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.

What do the warning lights on a Hyundai mean?

1 Green: the system is working correctly or is currently in use 2 Yellow: something is not working correctly – take extra care and check it out as soon as possible 3 Red: there is a serious, and potentially dangerous problem – stop driving as soon as it is safe to do so

How do you reset an airbag warning light?

Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.

Why is the air bag light on in my Hyundai Elantra?

19 people found this helpful. We have a 2010 Elantra Touring. The air bag light is in constantly. Took it in to the dealer and my regular guy, both said it was a “switch” in the passengers seat that required the entire seat bracket to be replaced.