Why does my motorcycle not start with a cracked spark plug?
When a cracked spark plug is installed, the spark will find the least path of resistance through the crack and ground out to your engine block instead of going all the way down to the end of the spark plug and jumping across the gap like it’s supposed to.
What to do when your engine has no spark?
Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. Finally, Have someone crank the engine and watch for spark. Remove one of the coils from the spark plug. Use an extra spark plug. A spark plug tester. Or even a screwdriver in the end of the coil.
Do you check for spark in no start?
In fact, with a crank/no start condition, I often check for spark first since it’s usually the easiest thing to check. Just be careful, as some ignition systems pack quite a punch and you don’t want to get shocked during your testing.
How to make a motorcycle crank but no start?
Grounding plugs to block wont give you a spark. youll have to make a set of dummy plugs by taping them together. turn spark plugs opposite of eachother, metal to metal and tape with electrical tape. Then plug the boots back on and check again. Click to expand… I don’t understand this at all.
Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. Finally, Have someone crank the engine and watch for spark. Remove one of the coils from the spark plug. Use an extra spark plug. A spark plug tester. Or even a screwdriver in the end of the coil.
In fact, with a crank/no start condition, I often check for spark first since it’s usually the easiest thing to check. Just be careful, as some ignition systems pack quite a punch and you don’t want to get shocked during your testing.
Why does my Harley Davidson have no spark?
If you have power to the coil, but no spark at the plugs, you are probably not getting any firing signal from the optics in the ignition module. Open up the nose cone end and see if it is just really dirty in there which can happen if the seal is leaking oil.
Why is there no spark in my ignition?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.