Why does my Mercedes Sprinter not start up?

Models affected: Mercedes Sprinter W906 M.Y. 2006-2013. Common issues: steering column lock faulty or faulty key. As a key and electronic steering column lock are parts operating on every cycle of ignition they do wear out en eventually fail.

What to do if the key does not turn in the ignition?

If the key does not turn in the ignition, try moving the steering wheel as you try to turn the key. The steering wheel will feel completely solid if you try to move it in one direction and may move slightly in the opposite direction.

What causes a Mercedes Benz key to not turn?

List of common problems and possible solutions 1 Locked Steering Wheel. New drivers always experience this at least once, so we thought we would include it in this list. 2 Discharged Battery Undervoltage. 3 Key Tumbler Defective. 4 Defective Electronic Ignition/Switch System EIS / N73. 5 Smart Key Remote. …

What’s the best way to turn the key in a car?

Push the steering wheel in the direction that allows a little movement and then insert the key and try to turn the key again. You can put pressure on the steering wheel and also try shaking the steering wheel. As you do this insert the key into the ignition and try to turn the key. DO NOT TRY TO FORCE THE KEY IN THE IGNITION.

Are there any sprinter keys left in stock?

. Only 2 left in stock – order soon. . Only 5 left in stock – order soon. . Only 12 left in stock – order soon. . Only 6 left in stock – order soon.

What’s the best way to turn the ignition?

Then insert the key into the ignition and gently jiggle the key without putting much pressure on the key as do this. As the lock pins on the tumbler wear out it will get harder and harder to turn the ignition of your car. Here is a video that will help you understand this problem.

Why does the key not turn when inserted in the ignition?

The EIS module could also be the reason that the key does not turn when inserted in the ignition. Many car owners complain that the car starts fine on a warm or hot day but in cold days the car will not start. This may sound strange, but it is reported frequently.

How many starts does a 2013 sprinter have?

2013 ML350, got the 10 starts remaining signal, replaced DEF, but now it’s down to 5 starts and has not reset. I am 5 hours from a Mercedes dealer. … read more I have a 2013 Mercedes Sprinter 2500. The Check DEF lamp I have a 2013 Mercedes Sprinter 2500. The Check DEF lamp came on while I was driving home from a short trip.

What’s the Def light on a 2013 sprinter?

2013 MB Sprinter 2500 with 41k miles, just got the 10 starts left light. DEF tank full. I was told to take it for a long drive and get it warm, because I … read more associates in automotive te… It will or start. The display reads Starts RE 0. 2012 It will or start. The display reads Starts RE 0. JA: Will the headlights turn on?

Is there a way to reset a Mercedes Sprinter?

Once the remaining starts gets to 0 the only way to reset is to use a Mercedes scan tool and perform what’s called SCN coding. This can only be done at a dealer. Sometimes you can get the dealer to come out and do a roadside assistance and perform this. But not always. This is the only way.

Why does my Mercedes-Benz Sprinter not start?

Why Won’t My Car Start? What are common reasons my Mercedes-Benz Sprinter 2500 won’t start? While there are a variety of reasons your Mercedes-Benz Sprinter 2500 won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.

What should fuel pressure be to start sprinter?

You must have at least 2500 PSI to start. 3. If no or low fuel pressure the nasty little culpret may be a 25 cent o-ring. The fuel pressure regulator is located at the rear of the fuel rail on 2002 to 2004 trucks. Its held in with two little torx head screws and can be a mother to get out. It’s not terrible you just have to work by feel mostly.

What to do if your Mercedes ignition switch is not working?

If you have a spare key try to see if you are experiencing the same symptoms with the other key. If the other key works, keep using it for a couple of weeks to verify that the issue is really the key and not the EIS. Try scanning your Mercedes-Benz for fault codes. Ideally using a Start Diagnostic Scanner.

How does the ESL system work on a Mercedes Benz?

The ESL system will then look to see if the Engine ECU (Electronic Control Unit) agrees that this is the authorised key being used. – Then and only then, when all three control units agree it is the correct authorised key being used, will it allow the “Turn & Start” function to be activated.

How does the Mercedes EIS ESL ignition system work?

The Mercedes EIS ESL Electronic Ignition Switch and Electronic Steering Lock system exists to make sure your car isn’t stolen. Your key has a sequential code, unique to your vehicle, and when inserted into the ignition, your car runs a series of tests, to make sure it’s the right key.

Why does my Mercedes Benz not turn on?

A problem that Mercedes-Benz owners may face is the key no longer turns in the ignition. This issue is often caused either by a defective key, bad shifter module, a failed Electronic Ignition Switch (EIS) also known as the EIS-EZS or a bad steering lock module (ESL).

Navigation