Why does my Kawasaki Bayou 300 have no spark?
It has no spark. Iv tried the obvious…charged battery, new plug, checked for obvious broken wires or shorts. It came with a spare CDI box and I tried it…no luck.
What are the ohms on a Kawasaki Bayou 300?
3.4 ohms between the two tirminals and 10 ohms between the + and plug wire end… (plug wire removed for test) well another guy had the same problem and same ohms it ended up beig the cdi that caused the problems ,if u want to look at the post its one page 6 on the forum here good luck with the repairs -corey-
What to do if your motorcycle has no spark?
I’ve read every “no spark” thread on every forum I could find across multiple ATV/dirtbike forums. I checked all grounds and ohmed all wires. Everything checks good. I tested the ignition coil, pickup coil, stator, ignition switch, ignition relay, etc….. All checks good.
Is the pulse coil on the Bayou 300 caltrec?
Not sure what brand the new CDI is, I ordered it off Amazon but it doesnt say Caltrec on it. The new stator and pulse coil are Caltrec tho. I checked all grounds and they check good. Then I checked all other wires to see if they were shorted to grnd, but they all check good.
It has no spark. Iv tried the obvious…charged battery, new plug, checked for obvious broken wires or shorts. It came with a spare CDI box and I tried it…no luck.
3.4 ohms between the two tirminals and 10 ohms between the + and plug wire end… (plug wire removed for test) well another guy had the same problem and same ohms it ended up beig the cdi that caused the problems ,if u want to look at the post its one page 6 on the forum here good luck with the repairs -corey-
I’ve read every “no spark” thread on every forum I could find across multiple ATV/dirtbike forums. I checked all grounds and ohmed all wires. Everything checks good. I tested the ignition coil, pickup coil, stator, ignition switch, ignition relay, etc….. All checks good.
Not sure what brand the new CDI is, I ordered it off Amazon but it doesnt say Caltrec on it. The new stator and pulse coil are Caltrec tho. I checked all grounds and they check good. Then I checked all other wires to see if they were shorted to grnd, but they all check good.
Is there a problem with my Bayou 300?
Hello, I’m new to this forum and am in need of some advice. We own a 94 Bayou 300 and I’m having starting problems. If i use the starter switch when the engine is cold it will turn over nicely but will not start. I appear to be getting a spark to the plug but not sure how strong.
What kind of starter does a Kawasaki Bayou 300 use?
After it sits over night, the sequence is repeated – won’t start via the starter switch/starter motor but starts with pull starter and after the first start is able to be “cranked” immediately by using the electric starter.
How to troubleshoot a 1987 Kawasaki Bayou klf300?
1987 Kawasaki Bayou KLF300, Troubleshooting a No Spark ATV! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Why does my KLF 300 have no spark?
Re: Klf 300 no spark at spark plug but got 12 volts both… Start looking at the brown wire that goes from the kill switch to the coil as the problem. It will be the brown wire. The start relay can also be the problem….. If you still have the problem after some troubleshooting respond here and I will help you.
1987 Kawasaki Bayou KLF300, Troubleshooting a No Spark ATV! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
Can a Kawasaki Bayou klf400 have a spark?
I’m working on a Kawasaki Bayou KLF400 for a family member that doesn’t have spark. I’ve already replace the ignition switch and the stator which were defective.
Re: Klf 300 no spark at spark plug but got 12 volts both… Start looking at the brown wire that goes from the kill switch to the coil as the problem. It will be the brown wire. The start relay can also be the problem….. If you still have the problem after some troubleshooting respond here and I will help you.
What to do if your Bayou 300 won’t start?
If you have a book look up the tasting procedures for the ignation box and rectofier when you replace do both one will take the other out my 96 would only spark when i let off the starter button. Yes, exactly the same symptoms here…when this “thing” occurs there’s no spark until let off the button. I have changed CDI, coil, plug.
After it sits over night, the sequence is repeated – won’t start via the starter switch/starter motor but starts with pull starter and after the first start is able to be “cranked” immediately by using the electric starter.
Why is the spark plug on my KLF 300 not working?
No spark.This is indication of faulty spark plugs.But spark plugs get power to spark from coil pack.