Why does my Jeep says perform service?
Many Jeep Liberty models are equipped with a “Perform Maintenance” service light. This service light is turned on when the vehicle’s ECU determines that the oil needs to be changed. Specific maintenance required depends on the mileage of the vehicle as well as driving conditions.
How to reset the perform service light on a Jeep Grand Cherokee?
How to reset the Perform Service light on a jeep grand cherokee. Instructions. 1 Locate the menu button, which is located on the center console of 2000-2007 Jeep Grand Cherokee Laredos. 2 Press the menu button to scroll through the menu. Locate the “Perform Service” option, which is located near or at the end of the scrolling menu.
How to reset perform maintenance on a Jeep Liberty?
Press and hold the “Reset” button, near the “Step” button, until the “Miles to Service” flashes and resets. Verify the “Perform Service” light goes away.
How to reset the service button on a Cadillac Grand Cherokee?
Press the gas pedal to the floor slowly three times within 10 seconds. Turn the ignition off. Wait 10 seconds and start the engine. If your vehicle is an older model Grand Cherokee, press and hold the reset button for 10 seconds while the engine is turned off but the key is in the “ON” position. How to Reset a Cadillac’s “Service …
How to reset the oil service maintenance light?
Set the gear to the PARK position. Turn ignition to RUN position, don’t start the engine. fully depress the accelerator pedal slowly three times within 10 seconds and the OIL CHANGE is reset. Turn the ignition off and then start the engine to verify the indicator has been reset. Set gear to Park position and close all doors.
How to reset the Perform Service light on a jeep grand cherokee. Instructions. 1 Locate the menu button, which is located on the center console of 2000-2007 Jeep Grand Cherokee Laredos. 2 Press the menu button to scroll through the menu. Locate the “Perform Service” option, which is located near or at the end of the scrolling menu.
Press and hold the “Reset” button, near the “Step” button, until the “Miles to Service” flashes and resets. Verify the “Perform Service” light goes away.
What does the service required message mean on a Jeep Grand Cherokee?
The Jeep Grand Cherokee limits the service-required message to indicate the routine maintenance needs of the vehicle. The light needs to be manually reset when the indicator turns on. Most maintenance shops automatically deactivate the light when performing maintenance.
Press the gas pedal to the floor slowly three times within 10 seconds. Turn the ignition off. Wait 10 seconds and start the engine. If your vehicle is an older model Grand Cherokee, press and hold the reset button for 10 seconds while the engine is turned off but the key is in the “ON” position. How to Reset a Cadillac’s “Service