Why does my car radio stop working after battery has gone dead?
There is a solution for this problem, too! Let’s find it out together! The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed.
What to do if your radio doesn’t have a security code?
If your radio doesn’t have a security code, and all the fusible links and fuses check out, you’ll have to do more diagnostic work to figure out what’s going on. Car radio codes are meant to act as a sort of passive anti-theft feature.
What to do if your car stereo battery dies?
Car stereos with a code feature require you to input a preset code any time the battery dies or is disconnected. The code may be in your owner’s manual, or you might have to contact a dealer. Electrical system components can be damaged during a jump start if precautions aren’t taken.
Why does my Honda radio Say enter code?
No radio- no AM, no FM no Bluetooth Audio- all I got was the mysterious message- “Enter Code.” After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered.
Why did my car radio stop working after the battery died?
In most cases, fixing a car stereo that quit working after the battery died is a lot simpler than that. Of course, it can also be a lot more complicated. There are a few different reasons for a car radio to stop working after the battery has gone completely dead.
If your radio doesn’t have a security code, and all the fusible links and fuses check out, you’ll have to do more diagnostic work to figure out what’s going on. Car radio codes are meant to act as a sort of passive anti-theft feature.
Why does my Honda radio lock up after battery is disconnected?
After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered. My owner’s manual told me I should have received this code number with my owner’s manual kit.
No radio- no AM, no FM no Bluetooth Audio- all I got was the mysterious message- “Enter Code.” After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered.
When do you enter the car radio code?
Some car radios come with an anti-theft feature that kicks in whenever they lose battery power. This feature typically locks the unit up until the correct car radio code is entered. The code is almost always specific to not only the make and model of the radio but also to that specific unit.
What does it mean when your radio is dead after replacing battery?
Radio “dead” after replacing battery. I HAVE THE CODES! (But no way to enter them) I see a lot of info out there about how to find your lost radio codes and whatnot, but that is not my problem as I have my codes.
Why does my car radio stop working when I Turn Off the battery?
Let’s find it out together! The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business.
Is it possible to fix a car stereo that quit working after the battery died?
And it probably isn’t. In most cases, fixing a car stereo that quit working after the battery died is a lot simpler than that. Of course, it can also be a lot more complicated. There are a few different reasons for a car radio to stop working after the battery has gone completely dead.
What happens if you hook up a battery to a ground cable?
This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery. If you hook directly to a battery, and any hydrogen gas has leaked from the battery, the resulting spark could ignite the gas and cause an explosion.
There is a solution for this problem, too! Let’s find it out together! The most common reason for a car radio to stop working after the battery has gone completely dead is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed.
Why is my clock radio not working when I start my truck?
You will find that its voltage is dropping too low while you are starting the truck. It [the new battery] has an internal defect and will have to be replaced. Of course, I am assuming that you are using the correct battery for your truck and not some under sized replacement.
Car stereos with a code feature require you to input a preset code any time the battery dies or is disconnected. The code may be in your owner’s manual, or you might have to contact a dealer. Electrical system components can be damaged during a jump start if precautions aren’t taken.
Do you have to have battery power on your clock?
The clock, however, has to have battery power all the time. Have your new battery load tested. You will find that its voltage is dropping too low while you are starting the truck. It [the new battery] has an internal defect and will have to be replaced.
What should I do if my car radio won’t work?
Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old. If the radio is busted, don’t have the original fixed.
After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered. My owner’s manual told me I should have received this code number with my owner’s manual kit.
Why does my Ricks free auto radio not work?
The radio may have been damaged by the electrical spike or may be locked up. Try disconnecting the battery terminals with the M12 fuse in place. Touch the battery terminals together to drain the radio capacitors. Then reinstall the battery cables. If the radio works, the problem was simply logic lock.
How to reset my Honda radio after putting in a new battery?
Step 1 Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display. Release the power button when the display lights up and the radio turns on.
Why is my Rez Radio not working after jump start?
REZ Radio, you MUST remove the 30A radio fuse (M12) located in the totally integrated power module (TIPM) in the engine compartment BEFORE disconnecting or reconnecting battery cables. If you disconnect or reconnect battery cables with the fuse in place, the electrical spike can damage the radio.
Some car radios come with an anti-theft feature that kicks in whenever they lose battery power. This feature typically locks the unit up until the correct car radio code is entered. The code is almost always specific to not only the make and model of the radio but also to that specific unit.
How to unlock a car when the battery is dead?
Follow these 3 steps to unlock your car when the battery is dead. Remove the hidden key (Key-less entry) If your car door lock won’t turn, remove the key and check for damage or debris. Using WD40, spray into the door lock and onto the blade of the key. Work the key in and out of the lock and side to side without applying force.
Follow these 3 steps to unlock your car when the battery is dead. Remove the hidden key (Key-less entry) If your car door lock won’t turn, remove the key and check for damage or debris. Using WD40, spray into the door lock and onto the blade of the key. Work the key in and out of the lock and side to side without applying force.
What happens when you listen to the radio in a car?
Battery situation when the radio is playing Many fellows ask if listening to the audio can damage the battery. If you turn the gadget on, when the engine of the vehicle is off, it will drain off the power.
How long can you play radio on a car battery?
If you are playing the radio on the battery and that the lights are on, it can even reduce from one hour to specific minutes. Everyone likes to listen to their favorite music and relax for some time. You can easily keep the device on while the engine is switched off. Most people are unaware of this simple and useful technique.
Can a car stereo battery drain your battery?
If the battery is old, consider replacing it with newer ones. Car Stereo also affects fuel consumption. Take great care of your battery if the weather is extremely cold. If you are using your car after a long time, you should check the battery first and see if it will work well.
Can a car battery run down while listening to the radio?
There is no possible way that a good battery would have run down in less than an hour of listening to the radio with the engine off. Heck, lots of people forget their headlights on, which use way more power than a factory stereo, for way longer than an hour, and their car still starts after that.
What happens if your car stereo is stolen?
If the factory car stereo is stolen from the vehicle, the radio becomes inoperable without the radio code. Operating the unit will require a “secret stereo unlock code” known only by the owner. Experienced a dead battery. Disconnected the factory radio harness. Disconnected the battery to the vehicle.
How long does a car stereo battery last?
An average battery can last approximately 5 to 6 hours if the stereo system is working on it. One major issue that can happen is when your speaker system requires more voltage than what your battery or engine is offering. This will cause your stereo system to work improperly.
If the battery is old, consider replacing it with newer ones. Car Stereo also affects fuel consumption. Take great care of your battery if the weather is extremely cold. If you are using your car after a long time, you should check the battery first and see if it will work well.
What happens if you jump start a car battery?
The biggest danger in jump starting or charging a battery is actually related to the explosive nature of the hydrogen gas that can leak from a lead acid battery. This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery.
What to do if your Chevy Tahoe battery dies?
4 people found this helpful. Resetting the computer by disconnecting the battery for a few minutes may only be a temporary fix. Had the same thing happen to mine after getting a jump start, windows wouldn’t roll down, no radio, gauges wouldn’t work, AC wouldn’t work, etc.
What should I do if my car radio is damaged?
When that happens, all you have to do is enter the right car radio code, and you’re back in business. In certain rarer cases, you may be dealing with a damaged radio or even damage to other electrical systems other than your radio.
Why is my MyGig radio not working after dead battery?
I know with my Caliber (where I retrofitted a MyGIG) that if I don’t pull the radio fuse before re-connecting the radio, the radio won’t power on after. Try disconnecting the battery again, remove the radio fuse, reconnect battery, then re-insert radio fuse.
The biggest danger in jump starting or charging a battery is actually related to the explosive nature of the hydrogen gas that can leak from a lead-acid battery. This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery.
What to do if your car stereo doesn’t work?
Car stereos with a code feature require you to input a preset code any time the battery dies or is disconnected. The code may be in your owner’s manual, or you might have to contact a dealer. While a dead battery, or a jump start, can result in a car radio that doesn’t work, it could also be a pure coincidence.
What happens when a car radio fuse is blown?
In the case of your car radio fuse, it is designed to sacrifice itself to prevent a dangerous amount of current from flowing through your car radio and the associated circuit. If your radio is dead due to a botched jump start or charge, and you’re lucky, then you may find that your car radio fuse is blown.
When that happens, all you have to do is enter the right car radio code, and you’re back in business. In certain rarer cases, you may be dealing with a damaged radio or even damage to other electrical systems other than your radio.
What happens when you cut power to a car radio?
When power to the radio is cut, the feature kicks in, and when power is returned, the unit is basically bricked until you enter a specific code. The readout may display, ever-so-helpfully, the word “code,” or it may just remain blank, or it may display an even more obtuse message, depending on the manufacturer.
Where can I find the reset code on my Radio?
If its the OEM radio, the dealership should be able to look up the reset code based on the VIN. Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old.
What should I do if my car battery loses power?
If proper battery replacement practices were followed then the radio, clock, or anything else on the car would never have lost battery power. There are a few rules for replacing a battery: Always make sure the radio and any other electrical devices are switched off before beginning.
Why does my car radio not work after battery change?
After changing your car battery the radio will not work. You did it the wrong way. So now you need to reprogram the radio, and you don’t want to break your b… After changing your car battery the radio will not work. You did it the wrong way. So now you need to reprogram the radio, and you don’t want to break your b… Skip navigation Sign in
If its the OEM radio, the dealership should be able to look up the reset code based on the VIN. Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old.
If proper battery replacement practices were followed then the radio, clock, or anything else on the car would never have lost battery power. There are a few rules for replacing a battery: Always make sure the radio and any other electrical devices are switched off before beginning.
How to reset the radio after a battery replacement?
This function is designed to prevent theft of the radio. Replacing the battery will also trigger the lock mode. The radio can only be reset by entering the security code that came with the Freestyle. If you no longer have the code, contact a Ford dealer to have them provide it for you.
Why are my radio and lights not working?
Often, this issue is caused by a dead battery. When a dead battery is the cause of the problem, all accessories in the vehicle, including the radio and lights, won’t work. But when a car owner attempts to turn on the engine and the attempt fails, yet the radio and lights still work, it can lead to confusion.
Apply 12 volt power to the vehicle either through the data link connector under the dash or by jumpering wires to a battery powered circuit at the fusebox or other connector. Always verify that all electrical devices and systems operate properly before releasing the car to the customer. Sounds like they failed on all three.
What happens if you listen to the radio for an hour?
An hour listening to the radio should not kill your battery unless you have a big amp and speakers. The dude who jumped my car checked the battery with a device that said it was in good shape. Thank you both for trying to help though!
Is there a way to revive a dead battery?
After the device has charged for 48-hours, turn the device on and check the battery power level. If successful, this method will have revived your previously dead battery allowing it to hold a charge again. Note: the first time to adapt this method will achieve good effect, because freezing the lithium battery will damage the battery.
How to reset the radio after battery replacement?
· Using preset station buttons -1- through -4-, enter code number attached to radio card. Press preset button -1- to enter first digit in code number, preset button -2- for second digit and so on. · Once entire code is entered, push (left or right) rocker button toward right and hold until anti-theft coding is activated.
How do I Reset my anti theft radio?
Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.
How do you reset a lead car battery?
Lead batteries do not have a BMS. 1. Switch on ignition (do not start engine) 2. Switch on dipped beam 3. Press 5x the rear fog light button (do not switch 5x on and off the rear fog light) 4. Press 3x key hazard lights (do not switch 3x on and off hazard lights) 5. Then the battery icon in the speedometer should flash 3x quickly.
Can a battery be reset after battery disconnection?
Click to expand… In my case- I DISAGREE — my experience with factory batteries has been great.
Apply 12 volt power to the vehicle either through the data link connector under the dash or by jumpering wires to a battery powered circuit at the fusebox or other connector. Always verify that all electrical devices and systems operate properly before releasing the car to the customer. Sounds like they failed on all three.
Car stereos with a code feature require you to input a preset code any time the battery dies or is disconnected. The code may be in your owner’s manual, or you might have to contact a dealer. While a dead battery, or a jump start, can result in a car radio that doesn’t work, it could also be a pure coincidence.
Battery situation when the radio is playing Many fellows ask if listening to the audio can damage the battery. If you turn the gadget on, when the engine of the vehicle is off, it will drain off the power.
Can a FM radio run down a car battery?
If you have the option, I recommend you run the laptop computer and the FM transmitter on their own batteries. The radio itself probably won’t run down your car battery, but additional accessories probably will. Your laptop computer comes with its own battery. Why would you want to run it on an inverter with the car off?
If you are playing the radio on the battery and that the lights are on, it can even reduce from one hour to specific minutes. Everyone likes to listen to their favorite music and relax for some time. You can easily keep the device on while the engine is switched off. Most people are unaware of this simple and useful technique.
What kind of car radio Will Self Destruct?
My car is a 2003 Hyundai Sante Fe with 92,000 miles on it. Some cars came with “anti-theft” radios that would self destruct unless you know the reset code if power is removed…Mostly German and luxury car models…Check your owners manual for the type of radio installed in your car.
How long does a car battery usually last?
It may need a good long slow charge via a battery charger, or a long day trip. Batteries usually last more than 3 years, but not always – especially if they have been allowed to discharge deeply. A good shop will test your alternator’s output as well as your battery’s condition.
What should I do if my battery is not working?
Press on Windows key+I to open Settings and click on Update & Security. Check for updates here and download and install them. Don’t forget to reboot your laptop before checking if the battery is working again or not. 2. Power Adapter
How does an anti theft radio work on a Chevy?
General Motors vehicles, including Chevy, contain anti-theft Delco Theftlock radios that can only be used by entering the correct security code. This security code keeps someone from using the radio in another vehicle if the unique security code is not entered. The radio display will read “LOC” and the device will not turn on.
The radio may have been damaged by the electrical spike or may be locked up. Try disconnecting the battery terminals with the M12 fuse in place. Touch the battery terminals together to drain the radio capacitors. Then reinstall the battery cables. If the radio works, the problem was simply logic lock.
REZ Radio, you MUST remove the 30A radio fuse (M12) located in the totally integrated power module (TIPM) in the engine compartment BEFORE disconnecting or reconnecting battery cables. If you disconnect or reconnect battery cables with the fuse in place, the electrical spike can damage the radio.
Why does my Mercedes Benz have no sound?
Troubleshooting the fiber-optic loop is the next step that you should do if removing the fuses does not solve the no-sound problem. The fiber optic cables are used to transmit the sound signal of your Mercedes-Benz between the different units for better sound quality and faster transfer rates.
How to hook up a Mercedes car stereo?
Mercedes E Class, W211 2003 2007 Audio50. Mercedes Car Radio Stereo Audio Wiring Diagram Autoradio connector wire installation schematic schema esquema de conexiones stecker konektor connecteur cable shema car stereo harness wire speaker pinout connectors power how to install. Mercedes Car radio wiring diagrams.
What are the signs that your car battery is dead?
Learn the signs that your car battery is dead or dying. The typical battery, in vehicles made in 1952 and later, is a “wet-cell” battery—a plastic cube containing sulfuric acid and lead, with two terminals coming out of the top or the side.
What to do if your factory radio is dead?
HELP!!! I would check for power on the back of the radio (on X1 connector on pin 1 should be an constant power to the radio and pin 8 is ground). The radio turns on from the Low Speed GMLAN data. Re: Factory radio completely DEAD! HELP!!!
Is the factory radio on my Chevy Silverado dead?
Factory radio completely DEAD! HELP!!! 2008 Chevy Silverado 1500 LT. Was at a wedding and got a ride home. When I went to go get my truck the next day the radio was completely DEAD. No clock, no display or audio…..Nothing, Nada, ZIP!
What causes the radio to go off when parked?
My problem now is that it has deteriorated into a situation where the van occasionally goes completely dead after being parked – as if the battery was disconnected (or the fusable link blew). It has NO power to anything at all – enough to clear all codes and radio presets.
Is it true that radio can drain car battery?
Yes, more likely, the radio can drain your car battery if you keep it running without starting the engine. Some would say that the louder you go, the quicker the battery goes off. To keep your battery alive for a more extended period, you should better allow the engine to recharge the battery.
How long can you play a radio on a battery?
With a strong battery, I’ve played the radio for several hours. This includes powering a subwoofer amp (300W). If it is only for a hour or so, no damage will occur. 8-10 hours may be pushing it.
Is it bad to listen to the radio while driving?
You are listening to the radio while driving is one of the best experience you can have. It relaxes you and keeps your mind off worries and problems. However, will it take too much of your battery’s power if you do it more often? Does listening to the radio drain car battery? Yes, more likely, the radio can drain your car battery …
What happens if you leave the radio on and turn off the engine?
That is about 347 days. Now if the radio is not going to SLEEP and stays in OPERATING mode with IGNITION off, it would draws 2A. Then the battery will be gone in 100 hours which is less than a week But there are many electrical modules inside the car which also draw battery power. Any of them, if not working properly could drain the battery.
Is it possible to jump start a dead car battery?
Fortunately, not all hope is lost because it is possible to jump-start a dead car battery so that you can power the motor and crank up the engine. Just make sure you drive straight to an auto shop and get a new battery after you do this. Below are the 5 steps for jump-starting a car battery that is completely dead. 1) Inspect the Battery
What does it mean when your car battery is dead?
Maybe you left some of your electronic accessories on in your vehicle after you turned off the engine. It is common for people to leave their headlights and radio on too. These things can easily eat up all the juice in the battery until there is nothing left. It is a horrible feeling to have a completely dead battery in your car.
What can cause a car battery to die?
There are a number of reasons why car batteries die. A few common ones include: Leaving headlights, interior lights, flashers, and the radio on when the car isn’t running Using the air conditioner when the car is not running
The biggest danger in jump starting or charging a battery is actually related to the explosive nature of the hydrogen gas that can leak from a lead acid battery. This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery.
When do you know your car battery is dead?
Car batteries always die at the wrong time. Not that there’s necessarily any good time for a battery to give up the ghost. But you usually only discover it’s dead when you’re in a rush to get somewhere and your engine won’t turn over. We can help.
An average battery can last approximately 5 to 6 hours if the stereo system is working on it. One major issue that can happen is when your speaker system requires more voltage than what your battery or engine is offering. This will cause your stereo system to work improperly.
How can I Stop my Car Stereo from draining my battery?
Simple as that! Just stop using your stereo system or any other battery draining application on your car’s battery. You should always ignite your engine first, let the alternator do its work and it won’t strain your battery. No one wants to listen to the beats coming out of your car from miles away. Just try to keep it to yourself.
Why does my car radio go dead after replacing battery?
The issue is that after 1)having a dead battery, 2)replacing said battery, and 3)having the car sit unused for a week while waiting on a replacement coolant tank part, I NOW HAVE A DEAD-SCREEN RADIO AND NO WAY TO ENTER THE CODE OR TURN ON THE RADIO.
Often, this issue is caused by a dead battery. When a dead battery is the cause of the problem, all accessories in the vehicle, including the radio and lights, won’t work. But when a car owner attempts to turn on the engine and the attempt fails, yet the radio and lights still work, it can lead to confusion.
Why does my car radio not work after a jump start?
The radio may also be damaged if the current battery goes dead and you replace it without removing the fuse. If the radio doesn’t work after a jump start or a battery cable disconnect/reconnect and you find a U0184 trouble code, it means the digital data bus has lost communication with the radio.
This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery. If you hook directly to a battery, and any hydrogen gas has leaked from the battery, the resulting spark could ignite the gas and cause an explosion.
Can You charge a car battery that is dead?
It all depends on the health of the battery if it is in a good condition you can recharge it with a starting voltage of 14V and reducing it to 12V once charging begins. So, yes you can charge a battery that is dead. How to charge a completely dead car battery Car battery completely dead won’t charge – Guide to Fix
What to do with a dead lead acid battery?
If it’s completely dead, it’s gone and you need to find a replacement. If you are lucky and there is enough juice left, you can hook it up to a smart battery charger and get more life out of the battery while desulfating the lead plates and bringing it back around.
If a car battery has low voltage, it indicates that some charge is left. At an extremely low level of current, you can’t jump-start a battery. That is when you’ll know your battery is completely dead and you need a new one.
Can a completely dead battery be recharged?
There are a few ways to recharge your battery, though the phrase “completely dead” is a bit more difficult to assess. If your car does not start because of a completely dead battery, your only option might be to get a jump start from another car and purchase a new battery in the near future.
What should I do if my car battery is dead?
In order for this to work as well as possible, you should refrain from using any features in the car that require power from the battery: air conditioning, radio, TV, etc. Driving around for just half an hour can bump up the voltage in your battery to a safely functional amount.
Now connect the black cable clamp to the working battery’s negative (-) battery terminal. Do not connect the final black cable clamp to the dead battery. Instead, attach that clamp to an unpainted, metal part of the car, such as a clean nut on the engine block. This will help ensure a safe jump.
What does it mean when your backup camera is not working?
If it’s a wifi camera, and it was working previously, it likely means that the camera or the display needs a reset. (You can check out some of our thoughts about wired vs wireless backup cameras here) It also wouldn’t hurt to check your fuses and the power cables for the camera (usually located behind the trunk panel of your car.
Why is my camera not working in my car?
If your display is not powering on at all, it’s likely a problem with the display, not the camera, so check the wiring diagrams for your car. (If you installed the monitor yourself, double check your work. Plugging the camera into the AUX dash cable rather than video feed is a common problem with home installs. ).
Why is my back up camera not working on my 2018 Dodge Ram?
I have a 2018 1500 Sport and my rear camera has started going out intermittently. It will work fine for a few days then one day I shift to reverse and all I get is a blue screen saying camera unavailable or I can see the guide lines but not picture just black screen.
When do the warning lights come on after a battery change?
Warning lights come on after battery replacement volkswag… After changing the battery, all was going well. The next day when I started my car, almost all of the warning lights came on (for ex: ECP, ABS, brake, engine, steering). The speedometer didn’t work either.
Why is my Chevy TheftLock radio not working?
The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.
Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old. If the radio is busted, don’t have the original fixed.
You realize that your battery is dead. How did this happen? A car battery is the most crucial piece of equipment to starting and driving your vehicle. It sends power from the starter motor to the sparks plugs, igniting your car’s fuel, while also giving other systems power.
What causes a car battery to drain in the morning?
If your alternator has a bad diode, your battery can drain. The bad alternator diode can cause the circuit to charge even when the engine is shut off, and you end up in the morning with a car that won’t start. 5. Extreme Temperature