Why does my brake controller not work when I hit the button?
That is why it works when you hit that button. If you find that the red wire is connected in the right place and is not loose or broken, then this is probably a problem with the internal circuitry of the brake controller and it will need to be replaced.
Why does my push button start not work?
The push button does not work but radio & lights run fine. Tomorrow is 2nd trip to dealership. We have replaced battery in key foband dealership assured me the car battery is fine. When the car is “jump” the brake drops and car turns right over.
Can a bad front brake cause a bad rear brake?
That way, if there is a leak in one part of the system, it should only affect one front brake and one rear brake. If this is what is going on, you need to identify and replace the faulty part. A pull when braking may also have nothing to do with brakes. Bad front tires, or broken belts in a front tire, could cause it.
Why is the Hyundai push button not working?
The message boards are blowing up with folks who are being left stranded by the Hyundai push button start problem. The issue has to do with a failure in the brake pedal sensor. Ideally, a driver is supposed to put their foot on the brake and push the button.
Do you push the brake all the way?
Whether the brake is depress all the way or not the car knows when you are pushing on the brake. i had the same situation when my battery was almost dead from being in Acc. the lights and everything worked but the car wouldnt start and the beeper was a very dull low sound. get a jump and try to start it.
What to do when your push button won’t start?
Trick to start Keyless Cars when the Controller won’t work or the Push Button won’t work. Sometimes the Brake pedal does not feel right and the car will not start, here is the Override start Procedure. Problem, fixed, emergency, smart key problems. Loading…
Why does the brake pedal won’t go down?
Upon further inspection, it appears the master cylinder on the brake was leaking. This could be the issue……….overnight fluid seeps in and makes the brake impossible to push. After some pumps and turning the car ON, the pressure is returned to normal and the car will start.
The message boards are blowing up with folks who are being left stranded by the Hyundai push button start problem. The issue has to do with a failure in the brake pedal sensor. Ideally, a driver is supposed to put their foot on the brake and push the button.