Why does my Arctic Cat Prowler not start?
When my starter went south, the solenoid would click, but the starter would not engage. The voltage read 4.5 volts, and dropping rapidly. I got everything back together battery charged and checked shows 12.8 volts went to turn the key you can hear the fuel pump kick on and the dash cluster do its thing.
Why is my Selenoid Prowler starter not clicking?
If you by-pass the solenoid it should turn over. How old is the battery, and is it in good shape? When my starter went south, the solenoid would click, but the starter would not engage. The voltage read 4.5 volts, and dropping rapidly.
What’s the problem with my Wildcat not starting?
The right way to verify what the problem is is to have someone check voltage with a meter while you try to crank it. First choice is a bad battery, 2nd choice is a loose ground or starter wire, distant 3rd would be the starter or solenoid. JMHO.
Is the battery on my Wildcat machine gone?
So machine was working great a group of us stopped for a break and when I went to start it nothing but a click. Battery has lots of juice. Is my starter gone just like that?
When my starter went south, the solenoid would click, but the starter would not engage. The voltage read 4.5 volts, and dropping rapidly. I got everything back together battery charged and checked shows 12.8 volts went to turn the key you can hear the fuel pump kick on and the dash cluster do its thing.
How to troubleshoot Arctic Cat ATV 650 twin?
Track down the battery cables and find the problem. Use a test light or a meter to follow the wiring – when you find where the voltage stops, you’ve found the problem. You can’t post conmments that contain an email address. – Answer the question. – If you need clarification, ask it in the comment box above.
Why does my Wildcat not start only clicks?
Won’t start only clicks! So machine was working great a group of us stopped for a break and when I went to start it nothing but a click. Battery has lots of juice. Is my starter gone just like that? So machine was working great a group of us stopped for a break and when I went to start it nothing but a click.
What kind of engine does a prowler 650 have?
Hello all, I recently bought a prowler 650, and soon after took it on a long ride. Went over lots of quad trails etc. Anyway, on the way home, I was on an open gravel road running at 6000 rpm (I know I shouldn’t have lol), when the engine suddenly started making a very loud rattling noise.
Why does my 2007 Artic cat 400 not start?
2007 Artic Cat 400 wont start. Clicking sound appears to be coming form the solonoid. Battery at 11.8 How check if solonoid the problem? Clicking this will make more experts see the question and we will remind you when it gets answered.
Won’t start only clicks! So machine was working great a group of us stopped for a break and when I went to start it nothing but a click. Battery has lots of juice. Is my starter gone just like that? So machine was working great a group of us stopped for a break and when I went to start it nothing but a click.
Why does my car make a clicking noise when I start it?
At this point try jumping the vehicle. If the starter still does not turn over with good power, then you got a faulty starter. Number two. If you hear a clicking noise trying to start that means you your ignition switch is good. It is sending power to your starter. Therefore you can rule out a bad ignition switch. Number three.
2007 Artic Cat 400 wont start. Clicking sound appears to be coming form the solonoid. Battery at 11.8 How check if solonoid the problem? Clicking this will make more experts see the question and we will remind you when it gets answered.
What kind of starter does Arctic Cat ATV have?
I have an Arctic Cat ATV Model 400 4 x 4. It has an electric start. When I press the electric start – there is a clicking sound (not from the starter), but I can hear it clicking where the battery cable and the starter cable are located by the right rear tire. Any ideas of what the problem might be. Submitted:8 years ago. Category: Motorcycle
Where is the starter relay located on an Arctic Cat?
Put your meter on the battery and hit the start button if you’re dropping below 10.5 volts while pushing the start button, your battery needs replaced. If it’s over 10.5 your relay needs replaced. Ask Your Own Motorcycle Question Customerreply replied 8 years ago Where is the starter relay located?
What should I do if my Arctic Cat won’t start?
Meter on the battery terminals – 11v. Turned the key on, still 11v. Hit the starter button, still 11v JACUSTOMER-2pxtbvqc- : hit the button once, get a single click at the solenoid. Repeat, and get the same. Christopher : Ok, the battery is bad, 11 standing volts tells me it has a shorted cell.
Can a bad solenoid cause a car to not start?
If the starter engages but does not disengage when you let go of the key, the solenoid is likely bad and the starter may suffer significant damage as a result. 6. Sometimes your car starts, sometimes it doesn’t. Intermittent operation can be a sign of a failing starter solenoid. Other issues that present a bad solenoid
Where is the solenoid on a car starter?
The starter solenoid is located on top of the starter. When you turn the key, it is the starter solenoid that pushes a plunger inside the starter motor, pushing the pinion towards the flywheel. Use a jumper wire to ground the solenoid to a bolt. Start the ignition and listen for sounds coming from the solenoid.
Is there a 2000 Arctic Cat that won’t start?
I have a 2000 Arctic Cat 300 that won’t start. I tried replacing the starter solenoid, but all it does is click – Answered by a verified Motorcycle Mechanic
If the starter engages but does not disengage when you let go of the key, the solenoid is likely bad and the starter may suffer significant damage as a result. 6. Sometimes your car starts, sometimes it doesn’t. Intermittent operation can be a sign of a failing starter solenoid. Other issues that present a bad solenoid
If you by-pass the solenoid it should turn over. How old is the battery, and is it in good shape? When my starter went south, the solenoid would click, but the starter would not engage. The voltage read 4.5 volts, and dropping rapidly.