Why does my 2010 Hyundai Santa Fe not start?
2010 Hyundai Santa Fe No Start, No Sound, No Crank when you turn the key in the ignition: If nothing happens when you turn the ignition key to the “Start” position, it means that the starter motor doesn’t turn over the engine. Most commonly this could be caused by a low/dead battery or there is no connection between the battery and starter.
When does a Santa Fe starter go bad?
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Santa Fe, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Santa Fe to crank, but not start.
Why does my Hyundai Getz crank but not start?
It will turn over or “crank over” but will never actually run. Spark issues are not limited to the plugs. Check the spark plug wires, the distributor or module, and plug gap. These all have a huge effect on the function of the ignition system.
2010 Hyundai Santa Fe No Start, No Sound, No Crank when you turn the key in the ignition: If nothing happens when you turn the ignition key to the “Start” position, it means that the starter motor doesn’t turn over the engine. Most commonly this could be caused by a low/dead battery or there is no connection between the battery and starter.
What’s the problem with my 2013 Santa Fe?
No one has added a helpful site for this 2013 Santa Fe problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: This is the same intermittent starting problem that others have complained about for years. Car will not start about every 8 tries. Lights come on, radio, everything but no starter engages.
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Santa Fe, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Santa Fe to crank, but not start.
It will turn over or “crank over” but will never actually run. Spark issues are not limited to the plugs. Check the spark plug wires, the distributor or module, and plug gap. These all have a huge effect on the function of the ignition system.
What should the voltage of a Hyundai Santa Fe battery be?
The voltage of the battery on your Hyundai Santa Fe can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values of approx. 12 to 13 volts.
How do you clean a Hyundai Santa Fe battery?
To clean the battery on your Hyundai Santa Fe, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers.
What causes a Hyundai Santa Fe to not start?
The most common causes that hinders normal starting operation of your Santa Fe are dead key fob battery, dead 12v battery, corrosion on battery terminals, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system. 1.
The voltage of the battery on your Hyundai Santa Fe can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values of approx. 12 to 13 volts.
To clean the battery on your Hyundai Santa Fe, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers.
When does the new Hyundai Santa Fe come out?
New 2020 santafe took delivery on January 4th, 2021, with less than 5000 miles on March 21st the vehicle refuse to start after it was started and shut off while we were sitting in a parking lot. While attempting to start it getting forward collusion warning but the engine would not crank.
What to do if your Santa Fe wont start?
If you have a model of Santa Fe which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle. Tip: You can try starting your Santa Fe with its second key.
When do you need a new starter for a Hyundai Santa Fe?
If the click happens and the solenoid and/or starter do not engage, you probably need a new starter. Once the starter is removed, an auto parts store can bench test it for you before selling you a replacement. If the click does not happen, the starter relay, ignition switch, or wiring may have a problem.
If you have a model of Santa Fe which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle. Tip: You can try starting your Santa Fe with its second key.
If the click happens and the solenoid and/or starter do not engage, you probably need a new starter. Once the starter is removed, an auto parts store can bench test it for you before selling you a replacement. If the click does not happen, the starter relay, ignition switch, or wiring may have a problem.
Are there any problems with the Hyundai Santa Fe?
No power steering, no power brakes. Was able to complete the turn and pull over. Put the car in park and was able to restart and continue driving with no problems. This is the 4th time this has happened since we got the car. Since it is sporadic, dealer cannot find what is wrong.
Why is there no brake light on my Hyundai Santa Fe?
This issue is visible when the vehicle is stationary and in motion. This issue has caused me to be pulled over by police officers as well as it can cause unsafe braking conditions due to no brake light being illuminated on the vehicle. This is the 3rd time that this has happened with this vehicle.
Where does the clicking noise come from on a Hyundai Santa Fe?
The turn signal “clicking noise” started working continuously and independently from the actual position of the the turn signal lever and the associated lights on the panel. Electrical smoke came from the steering column from the area near the turn signal indicator handle.
Why does my 2017 Hyundai Santa Fe not start?
See all problems of the 2017 Hyundai Santa Fe . Navigation screen does not turn off after the ignition is turned causing the battery to drain and car will not start. My new 2019 Hyundai sante fe from the time I bought it had the yellow check engine light come on. It said the bsm system wasn’t working.
Is the Hyundai Santa Fe a bad car?
Both the 2011 & 2012 Santa Fe model years DO show a significant defect trend of the engine stalling. Currently we’re not rating the 2010 Santa Fe as “bad” or “poor”. Just be aware of this potentially serious problem. This data is from the NHTSA — the US gov’t agency tasked with vehicle safety.
This issue is visible when the vehicle is stationary and in motion. This issue has caused me to be pulled over by police officers as well as it can cause unsafe braking conditions due to no brake light being illuminated on the vehicle. This is the 3rd time that this has happened with this vehicle.
Why does my Hyundai Santa Fe make a whining noise?
The dealership replaced the front ball joints. A week after they did that, it started making a whining sound. Again, it doesn’t do it all the time, mostly when it is cold. It stops after a few minutes. I do not have a trailer hitch on my Sante Fe.
Why does my Sante Fe make a clunking noise?
My Sante Fe makes that bouncing clunking noise during normal driving and while going over uneven roads and/or bumps. But it doesn’t do it all the time. The dealership replaced the front ball joints. A week after they did that, it started making a whining sound. Again, it doesn’t do it all the time, mostly when it is cold.
Why does my Hyundai make a clicking noise when turning?
The problem is caused by a flexible rubber coupling. Hyundai has issued a service bulletin 14-ST-002-1 to address the problem on the vehicles listed below. The noise does not affect steering. The new flexible coupling is part # 56315-2K000-FFF
Where was the Hyundai Santa Fe engine clicking and tapping noises?
My daughter was traveling on the freeway I-80 and 60 miles outside of laramie wyoming, the engine made clunking noises the the car slowed down and she pulled over to side of I 80 this was 18 Feb 2021. She was towed to laramie tire and auto repair.
My Sante Fe makes that bouncing clunking noise during normal driving and while going over uneven roads and/or bumps. But it doesn’t do it all the time. The dealership replaced the front ball joints. A week after they did that, it started making a whining sound. Again, it doesn’t do it all the time, mostly when it is cold.
What kind of car has a popping noise?
I just wanted to share my scary story. Tl- the contact owns a 2013 Hyundai Santa Fe sport. The contact stated that while driving approximately 65 mph a loud popping noise suddenly occurred and smoke was seen coming from the hood of the vehicle. After lifting the hood flames were present coming from the engine.
What does it mean when your Hyundai i10 won’t start?
The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your i10 won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.
What to do if your Hyundai Getz won’t start?
Check the battery and the terminal cable connections. If they look really corroded, you need to clean the battery posts and cable connectors or replace the cables and try to start the engine. Also check the starter. The solenoid attached to the top of the starter can fail, as well as the components inside.
What should I do if my Hyundai Elantra won’t start?
Got a jump start from Hyundai roadside assistance (good service) and drove the car for about 30 minutes to recharge the battery. Arrived at home, turned off the ignition. Tried to restart the car, but the engine wouldn’t turn over.
What to do if your Hyundai won’t start?
If your Hyundai doesn’t start, it can have various causes. Some problems can be solved quickly, others require a visit to the workshop. Find out why your car won’t start and what you can do about this problem.
Why does my Hyundai Elantra not turn on?
There are really two main ways that a vehicle will not start. The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Elantra won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.
How long does a Hyundai Sonata not start?
The check hybrid system light message comes up. The car will not start for 15 to 45 minutes. The engine light is on once the car starts but the next day there are no lights or diagnostic codes. Stopped in a drive way and had to push it.
Why does my Hyundai Tucson not start after a cold start?
The car radio and other electrical loads have a few dropouts after a cold start. These are all typical signs of a weak battery. After a few minutes of driving, the problems usually disappear as the battery recharges. You think everyone is all right now? Unfortunately it is false! The problems are only getting worse every day.
Why is the starter clicking on my Hyundai?
If the starter is clicking on your Hyundai, it could be the battery, or it may be the starter itself. The best-case scenario is that it’s the battery, but even if it is the starter, don’t despair. Even an inexperienced person can change the starter out in about 90 minutes.
Why does my Hyundai Santa Fe not start?
Hyundai santa fe sport: 2010 santa fe sometimes wont start. 2010 santa fe sometimes wont… 2010 santa fe sometimes wont start. cranks over find but dose not start. have to try if 4 or 5 times before it starts. it is intermitant and happens every 10 or 12 starts. thanks
If the starter is clicking on your Hyundai, it could be the battery, or it may be the starter itself. The best-case scenario is that it’s the battery, but even if it is the starter, don’t despair. Even an inexperienced person can change the starter out in about 90 minutes.
Check the battery and the terminal cable connections. If they look really corroded, you need to clean the battery posts and cable connectors or replace the cables and try to start the engine. Also check the starter. The solenoid attached to the top of the starter can fail, as well as the components inside.
What to do if your starter won’t start?
Put the new starter on the engine and tighten the mounting bolts with the socket and ratchet. Reconnect the electrical wires, tightening the nuts with the wrench, and then plug in the wiring harness.
New 2020 santafe took delivery on January 4th, 2021, with less than 5000 miles on March 21st the vehicle refuse to start after it was started and shut off while we were sitting in a parking lot. While attempting to start it getting forward collusion warning but the engine would not crank.
Is there any way to fix a Hyundai Santa Fe?
Total electrical failure with no recourse at the moment, Hyundai motor of America consumer affairs wants us to sign a settlement agreement to refund our expenses and have not fixed or replaced the car.
Total electrical failure with no recourse at the moment, Hyundai motor of America consumer affairs wants us to sign a settlement agreement to refund our expenses and have not fixed or replaced the car.
When does the blower turn off on a 2010 Santa Fe?
We have a 2010 Santa Fe A common occurrence has been to be driving along with the heat/blower on over half close to 3/4. All of a sudden the blower will turn off without even touching it. It will go on and off randomly without even touching it.
Why is my Hyundai radiator fan not running?
That can be caused by a faulty engine coolant temperature sensor or a wiring problem between the ECM and pin 3. If you do find ground on pin 3, jumper across pins 1 & 2 in the socket. If the radiator fan runs, then the radiator fan relay is bad. Replace it. If the fan still doesn’t run, provide battery power and ground directly to the fan.
Why does the engine keep running when the key is turned off?
The cooling fans, radio, heater fan, etc. shut off but the engine keeps running. Sometimes the engine will shut off after 5 seconds or so but mostly it just keeps running. Either way the battery dies over night (I dump the clutch to stall the engine). I checked the ignition switch and the ign1 ign2 and st relays, they are ok.
Why is the fan in my Hyundai Santa Fe not turning off?
We have a 2010 Santa Fe AWD and the fan in the engine won’t turn off. We turn off the car after a short trip and the fan just keeps running. We tried turning it back on and accellerating but the engine fan keeps running when the key is removed.
Why does the cooling fan run after the engine is shut off?
The rise in the temperature of the water after the engine is shut off is because of the residual heat in the engine and the lack of further airflow across the radiator – hence the running of the fan. SteveF
What kind of AWD does a Hyundai Santa Fe have?
We have a 2010 Santa Fe AWD and the fan in the engine won’t turn off. We turn off the car after a short trip and the – Answered by a verified Hyundai Mechanic We use cookies to give you the best possible experience on our website.
What to do if your computer cooling fan won’t run?
Replace the cooling fan relay with a new one. A stuck closed relay is the only thing that can operate the cooling fan continuously with the key off. The computer looses power with the key off and the same applies to the coolant temperature sensor. The relay, however, has direct power to one side, the same as a light switch.
Is there a problem with my 2011 Santa Fe?
However a class action lawsuit filed around the same time details multiple claims from Sante Fe owners that claim the engine stalling happens at any time, under any conditions. No one has added a helpful site for this 2011 Santa Fe problem yet.
Is the 2011 Hyundai Santa Fe a good car?
Instead: I’ve waited to write a review on our Limited FWD until we’ve had it for a couple months in order to get over the “I love this vehicle” feeling that we all have when we get a new car. We now have almost 3,000 miles on ours, and we don’t necessarily love this vehicle, but we really like it a lot.
Why does my Santa Fe car not start?
My Santa Fe 2009 was doing the exact same thing (cranks but won’t start). It was sporadic so hard to troubleshoot. It did that once every second week but lately it was once a day and last Friday, car would not fire up for 4 hours….We tried changing the crankshaft positioning sensor but still having issues.
When does a Hyundai Santa Fe engine stall?
In a 2-page letter sent August 2014 to Santa Fe owners, Hyundai claims the engine stalling only occurs under a “specific set of operating conditions”. However a class action lawsuit filed around the same time details multiple claims from Sante Fe owners that claim the engine stalling happens at any time, under any conditions.
What is the code for the Hyundai Santa Fe?
The code in the computer after failure should be P1690 or P1693 (or both). After changing the antenna piece near the ignition (180$ at the dealer), the icon shows up and car starts every time…. been around 50 times to far and no issues. Hope this helps 64 people found this helpful. this sounds so similar to whats happening with our 02 santa fe.
My daughter was traveling on the freeway I-80 and 60 miles outside of laramie wyoming, the engine made clunking noises the the car slowed down and she pulled over to side of I 80 this was 18 Feb 2021. She was towed to laramie tire and auto repair.
What kind of problem does a Hyundai Santa Fe have?
Have a 2009 Hyundai Santa Fe GLS 2.7 that was having starter problems. I would get dash lights and radio etc. but no mechanical sound when starting. I but the problem has returned?
When was the last time my Hyundai Santa Fe ran?
This topic contains 8 replies, has 5 voices, and was last updated by Jay 3 years, 8 months ago. I am new to this forum. I am also elderly and need a car that runs.
Why is the fuel filter on my Santa Fe not working?
The fuel filter of your Santa Fe does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure.
Why does my 2010 Santa Fe not start?
2010 santa fe sometimes wont start. cranks over find but dose not start. have to try if 4 or 5 times before it starts. it is intermitant and happens every 10 or 12 starts. thanks Show More Show Less Ask Your Own Hyundai Question Share this conversation Answered in 2 hours by: 7/29/2012 Hyundai Mechanic: AMD, Master Technician replied 7 years ago
What was the worst problem with the Hyundai Santa Fe?
Worst 2010 Hyundai Santa Fe Problems #1: Engine Failed 2010 Santa Fe Average Cost to Fix: $8,000 #2: Engine Stalls/Shuts Off While Driving 2010 Santa Fe Average Cost to Fix: N/A #3: Spring Broke While Driving 2010 Santa Fe Average Cost to Fix: $1,500
Why does my Hyundai Santa Fe make noise?
Try checking the rubber straps that hook the muffler to the chassis – they can come off. Also try checking the rear number plate to see if it clunks when you close the tailgate – if so it will clunk going over bumps. The Dueller tires are also have hard,noise making side walls going over bumps.
Are there any recalls on the 2010 Hyundai Santa Fe?
Based on information received from our latest subscriber survey, our reliability history charts give you a rundown on how used vehicles are holding up in 17 potential trouble spots, ranging from the engine, transmission, and brakes to power equipment and the electrical system. The 2010 Hyundai Santa Fe has been recalled 3 times by NHTSA.