Why are the brake lights on my Honda not turning off?

If you are the owner of a Honda or an Acura and find that your brake lights won’t turn off, even after removing the key, I’m happy to say the solution is usually simple and cheap. When you press down on the brake pedal, a brake pedal switch bumper on the top of the pedal assembly moves away from a plunger, activating the brake light switch.

What to do when your brake lights are not working?

In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.

Where is the brake light switch on my car?

Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.

What to do if your brake pedal switch is missing?

If your brake pedal switch bumper is broken or missing, you will need a replacement brake pedal switch bumper. If the bumper is intact, you may need a brake light switch. Now that you’ve diagnosed the issue, fixing the problem yourself is simple. Go to an auto parts store or Honda dealership and ask for a brake pedal switch bumper.

How do you replace a brake light on a Honda?

In order to replace the part, you need to create a vacuum in the braking system, which is only possible with the car running. Press the brake pedal with one hand. With the other hand, slide the brake light switch bumper up the brake pedal, feeling around for the hole where it will go.

What happens if your brake lights stay on?

If your brake lights are staying on, it will drain your battery. You need to disconnect your battery while the car is off or until you resolve this issue.

Locate the switch near the top of the brake pedal underneath the dash. Have an assistant stand behind the vehicle. Check if the stopper is on the pedal. Press the brake pedal to gain access to the switch, and press button on the brake light switch.

What to do if your Honda Civic is stuck in Park?

The engine is running fine, but the shifter just won’t move. There are several things you can try to get your Honda Civic moving now. These include checking to see if the parking brake is stuck, finding the shift lock solenoid override (if applicable), and the shift linkage. Let’s get straight to it.

Why is the parking brake stuck on my Honda Civic?

The rear brakes are likely icing up and freezing the brake mechanism in the parking brake on position. yea ive been havin the same problem the last few weeks so i jus put it up 2 or 3 clicks now and it works jus fine.

Why does my Honda Civic brake light stay on?

Is your brake light staying on, in your Civic? draining your battery? There is a little piece of rubber that falls out of the brake pedal and causes the lights to stay on because there is no contact between the brake pedal and the brake light switch.

What happens when you pull the parking brake on a Honda Civic?

Only one of your rear wheels lock up when you pull the parking brake up. OP, if you can, pull the rear tires off, pull the hub off, and inspect and (if need be) adjust the parking brake lever. Wtf are you talking about? Only one of your rear wheels lock up when you pull the parking brake up.

Why are the brake lights not working on my car?

All of these failures will cause the tail lights to not work, but will still allow brake lights to turn on when the pedal is depressed as the brake lights run on a different line of circuitry. Once a driver realizes their tail lights are not working, they should immediately address the problem for their own safety and that of others.

What to do if your break light won’t turn off?

You can check the brake pedal stalk to find the switch. Or taking car to an expert mechanic would be a wise decision as well. Pressing and depressing the brake pedal numerous times might help to connect switch and tail lights. There is a rubber stopper that pushes the plunger-style button.

What to do when your brake lights are stuck?

Sometimes universal bumpers are a little too large to fit, so clipping a little rubber off of the flange can help. When the bumper is in place, release the brake and the plunger will press against the new part. Your brake lights should now turn off!

Why are the brake lights not working but the tail lights are?

Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.

Is it dangerous to drive with brake lights not working?

Driving at night with either brake lights or tail lights not working is dangerous for you and other drivers on the road. It takes a long time to notice when the brake lights not working but tail lights are or vice versa. It is so because you won’t know what is happening in the backside while driving until someone points it out.

Where are the brake and tail lights on a Honda Civic?

Tail and brake light on the drivers side of the rear cluster. and tail light on the side light. Unless there is a brake light in there also? Think I need one 501 and one 582. I think.. The advice above is incorrect. On a 2007 car you need 2 x T20/7443 bulbs and the same for rear tail light.

What kind of light bulbs do you need for a Honda Civic?

On a 2007 car you need 2 x T20/7443 bulbs and the same for rear tail light. For the stop tail light bulbs you need two 582 dual filament bulbs. Click to expand… Nope, wrong.

What to do when your Honda Odyssey won’t start?

Thus, the first thing you need to check when your Honda Odyssey doesn’t start while the dashboard is flashing is the car’s battery. You can perform a quick jump start and see if the problem is resolved or not. Other than that, you might need to check the alternator or the starter.

What to do if your Honda Odyssey brake light is not working?

Check to see that both of them are lighting up. If not, try replacing the bulb and see if that solves the problem. The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Odyssey is having trouble stopping, or noticeably leaking fluid, don’t drive it.

What to do if your brake lights are not working?

Please note that tail lights can work even if the brake lights are burned out. It is entirely possible that all the brake lights burned out at the same time. The first thing that you should do if all of the brake lights are not working is check the fuse. It’ll be clearly labeled.

How can I tell if my Honda Accord brake lights are working?

You can test whether or not your Accord’s brake lights are working all by yourself. Just back up really close to the garage door and push the pedal. You should be able to see the brake lights illuminating the door. If even one of them comes on, you know that the brake light fuse isn’t blown. We’ll go into more depth on that below.

How to fix brake light on Honda Civic?

How to Fix: Brake Light Stays On Honda Civic – YouTube This video explains the probable cause and the fix procedure for the stubborn brake light on those 96-00 Honda Civics.Police Brake Light Switch video: http:/…

What to do if your Honda Accord brake light does not turn off?

CLICK SHOW MORE: Honda Accord Brake / Tail Light Remains On Illuminated – Won’t Turn Off Fix Repair Help Troubleshoot Will Not Turn Off. Quick Fix: If you need to do a quick fix, use cardboard, put a bolt in the hole, or tape a “spacer” such as two pennies, to the pedal and this will get you down the road.

Why are my brake lights stuck on my Honda?

When the bumper is in place, release the brake and the plunger will press against the new part. Your brake lights should now turn off! A broken brake light switch bumper is the likeliest cause of Honda or Acura brake light issues, but sometimes a broken brake light switch is the culprit.

What are the lights on a Honda CRV?

(15A) Parking lamps (front), fog lamp switch, front side lamps, licence plate lamp, tail lamps, tailgate release relay, multifunction control module, instrument panel lamp (s) (15A) Alarm system siren, interior lamp, ignition switch illumination lamp, rear screen wash/wipe control module, interior lamp

What makes up the fuse box on a Honda CRV?

(15A) Crankshaft position (CKP) sensor, engine control module (ECM),multifunction control module, injectors, idleair control (IAC) valve, immobilizer control module, engine control (EC) relay 1/2 (15A) ABS control module, brake system warning lamp, engine control module (ECM), cruise control, multifunction control module, horn, horn relay

Why does my parking brake warning light stay on?

If there are no problems detected, the lights will go out. If the car’s computer believes the parking brake is engaged, or there’s some other problem, the red light will stay on. There are usually two possible reasons why your parking brake warning light stays on after you’ve released the parking brake:

What happens when you release the parking brake?

Releasing the brake should turn off the light. Some vehicles will automatically release the parking brake when you shift out of park. RepairPal Tip: Depending on your vehicle, it may have one or more brake warning lights. Some have a separate parking brake warning light, while others may combine several brake-related functions into one light.

What to do if your brake light won’t turn off?

Close the reservoir and keep on checking on the brake fluid level regularly to prevent such problems. Find out if there are signs of external leaks. this can be detected by fluid drops on the bolts near the master cylinder booster as well as on the floor where the car is packed.

Why do my brake lights keep getting stuck?

There, you will almost certainly find crumbles of blue or yellowish rubber that is broken and dry. These crumbs are a clue that your brake pedal switch bumper has succumbed to old age and causing your brake light problem. When age and heat get the best of the bumper, it cracks and falls out of place.

Is there a brake system problem in 2017 Honda CRV?

Just went to start my 2017 CRV Touring model and when went to start it lights flashed and I got “Break System Hold Problem” then “Brake System Problem” error messages. When I exit the car there is beep beep beep beep and I can’t lock the car.

Is there a problem with my Honda CRV?

Waiting for the tow truck, and dealership is completely flummoxed when I call. Has anyone else had this problem? Could be a bad battery, which brings up all sorts of unrelated alarms on the 5th Gen. Let us know when you find out. AAA came and jumped the battery, and the car started right up.

Why are the turn signals on my Honda Civic not working?

It is expected for the turn signals to start blinking when the blinker switch is flipped, but that isn’t always the case. Faulty turn signals aren’t only unsafe, they could also point out an existing electrical issue in your Honda Civic.

What to do if your turn signal is not working?

To diagnose if the turn signal light fuse is blown, refer to your Civic’s owner’s manual or on the cover of the under-dash fuse box (in the driver side foot well). Pull out the fuse to see if the inside wire is separated. If so, you will need to replace the fuse.

Why is the interior light not turning on?

There are several reasons why your interior light isn’t turning on or off. Fortunately, you don’t have to spend a fortune-or even take your car to a mechanic-to diagnose and resolve the problem. This article applies to the Honda Civic/Del Sol (1992-2000), and Accord (1990-2002).

What can cause a Honda hazard light to malfunction?

A defective hazard button could likely cause the issue described. It usually prevents the turn signals from passing through the hazard light circuit, thereby cutting off the signals required to operate the hazard light. What can cause a Honda hazard light and turn signals to malfunction? A shorted out bulb or a bad socket can cause this to happen.

Why does my car light keep coming on?

According to expert maintenance tips, brake switch sticking is the most common reason behind lights staying ON. You can replace the switch from the brake pedal to identify the problem. Diagnosing brake switch would help to discover the main problem. Go for the replacement is brake switch is out of order.

Where is the brake light switch on a Honda Accord?

At the very top of the pedal, you should see the point of the brake light switch pointed towards a vacant hole. Use a flat head screwdriver to push against the switch. Then with the circular, flat end of the pedal stopper pad facing the switch, snap it into place. Release the brake light switch.

Where is the brake light switch on a car?

As you press the pedal, the shaft presses the button, which turns on the brake lights. If you are unsure where to locate your brake pedal switch, refer to the service manual for your specific vehicle. The switch will have a wired pigtail coming off of it and will be mounted directly behind the brake pedal.

Where are the fuses located on a Honda Odyssey?

Condenser Fan Relay, Fan Control Relay, Heater Control Panel, Radiator Fan Relay, Rear A/C Blower Motor Relays, Rear Window Defogger Relay, Rear A/C Mode Relay And Motor, Recirculation Control Motor It is located under the dashboard on the passenger’s side.

What are the dimensions of a Honda Odyssey?

Hiproom (in., front/middle/rear): 57.8/67.0/49.1 Cargo Volume (cu. ft., behind rear seat): 38.1 Cargo Volume (cu. ft., maximum): 146.1 Passenger Volume (cu. ft.): 170.7 Wheelbase (in.): 118.1 Length (in.): 201.2 Height (in.): 68.5 Width (in.): 76.3 Track (in., front/rear): 66.1/66.1 † With Honda Satellite-Linked…

Are there any driving lights that do not turn off?

Driving lights do not turn off. General Maintenance, Troubleshooting & Accidents. Parking lights and brake lights won’t shut off! General Maintenance, Troubleshooting & Accidents.

Why do daytime running lights stay on even after ignition is off?

Daytime Running Lights stay on even after ignition is off My daytime running lights won’t turn off even when the car is off and the key is pulled out of the ignition! I yanked the fuse out to temporarily fix the problem, but this just won’t cut it as a long-term solution.

Driving lights do not turn off. General Maintenance, Troubleshooting & Accidents. Parking lights and brake lights won’t shut off! General Maintenance, Troubleshooting & Accidents.

Why are my running lights not turning off?

Running Lights won’t shut off. General Maintenance, Troubleshooting & Accidents. NEW Here need some help!!! Please General Maintenance, Troubleshooting & Accidents. Help!!! Driving lights do not turn off. General Maintenance, Troubleshooting & Accidents. Parking lights and brake lights won’t shut off!

Why does my car light stay on even after ignition?

I yanked the fuse out to temporarily fix the problem, but this just won’t cut it as a long-term solution. My car’s still under warranty, so I could take it in to the dealer, but I’d rather avoid them if I can (they’re jerks) and they’ll be closed by the time I could get there today, and won’t reopen until Monday anyways.

What are all the lights on a Honda Civic?

Clock, Gauge Assembly, Hazard Switch, Back-Up Lights, Interlock System, Integrated Control Unit, Roof Unlatched Indicator (del Sol), Shift Lock Solenoid, A/T Gear Position Switch, Master Switch (del Sol) Dash Lights, Dimming Signal, Parking Lights, Tail Lights, License Plate Lights, Console Lights, Option Connector “D”

When do you need to replace the brake light switch?

If the brake lights either stay on when they shouldn’t or do not turn on at all, you may have to replace the brake light switch. The brake light switch is the electrical switch that is responsible for activating the brake lights. When the pedal is pressed, the brake light switch makes contact, and the the brake lights are illuminated.

What are the symptoms of a bad brake light switch?

When the brake light switch does fail, usually the vehicle will produce a few symptoms that can alert the driver that a problem has occurred. Brake lights stay on. One of the symptoms commonly associated with a bad brake light switch are brake lights that stay on at all times.

How do you replace a brake light switch?

Unplug the switch. Loosen the adjustment nut with an 18-mm wrench. Once the adjustment nut has been loosened from the mounting plate, the threaded brake light switch can be unscrewed by hand and removed. Screw in a new brake light switch. Tighten adjustment nut.

How do you turn off the brake lights on a Honda Accord?

Use a flat head screwdriver to push against the switch. Then with the circular, flat end of the pedal stopper pad facing the switch, snap it into place. Release the brake light switch.

What to do if your brake lights turn off?

You can disconnect the plug from the brake light switch at the brake light pedal to see if the lights turn off. If they do, you will need a replacement brake light switch. Otherwise, you will need further electrical diagnosis. The statements expressed above are only for informational purposes and should be independently verified.

When does the brake warning light go out?

During vehicle start-up, after the ignition system is turned on and before the engine starts, all of the warning lights on the dash, including the brake warning light, are illuminated and after a few seconds, they should all go out.

When does the center brake light come on on a Honda Civic?

The center brake light, sometimes referred to as the third brake light or stoplight, on your 2001 Honda Civic lights up when you hit the brake pedal and helps prevent you from being rear ended by the cars behind you. See how to change the center brake light (CBL) on your Honda Civic in the video above.

Where can I buy a 1996 Honda Civic?

Clean CARFAX. Cyclone Blue Metallic 1998 Honda Civic LX FWD Automatic 1.6L I4 SMPIAt S & H we pride ourselves on our OUTSTANDING CUSTOMER SERVICE, our TRANSPARENT SALES PROCESS and our ROCK BOTTOM PRICES!Enjoy the benefits of certified service near Mishawaka IN, South Bend IN, Niles MI and Edwardsburg MI at the S&H Motor Sales Service Center.

What should I change in my Honda Civic EX?

Coupe (2 Door) Add antifreeze Low coolant levels is all to common – top yours up today 2001 Honda Civic EX 1.7L 4 Cyl. Coupe (2 Door) Replace your air filter! Replacing a dirty air filter can improve gas mileage by up to 4%.

Why is my passenger side brake light not working?

The brake light (passenger side) went out. I replaced the bulb and the other one while I was at it. But the passenger side brake light still doesn’t work. Even tried switching bulbs to use the one that I knew was working on driver’s side, but still wouldn’t work on passenger side. I see that there’s only one fuse control for both lights.

Why are the tail lights on when the car is off?

If the tail lights are on when the vehicle is off, there could be a few causes depending on the vehicle, including a broken brake light switch or brake light switch stopper, faulty trailer light plug, or a broken wiring harness. First, check if it’s the tail lights or the brake lights. Learn the difference of the two here.

Where is the fuse on the brake light?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.

Where are the brake lights on my car?

Is there an ignition switch on a Honda Odyssey?

The ignition switch/wiring (Honda part number 35130-S0X-A02) seems not to include any keys, so it does not include the full switch that includes the lock tumblers. There is also a question about an immobilizer unit, but I don’t think my Odyssey has one.

Why is the door ajar on my Odyssey?

According to other Odyssey owners it is normal for the door ajar, brake and charging system lights to illuminate when the alternator is failing, the door ajar light confuses the problem making it seem that there is a weird electrical problem.

What to do when your third brake light is not working?

When the lower lights do not come on and only the third-brake light works, the brake-light switch may be ruled out. Again try the emergency-flashers to check for wiring, socket and lamp problems. If the flashers work, check for blown fuses as a few vehicles use separate circuits for the lower and third brake lights.

When does the brake light switch show continuity?

Using the wiring diagram, we can determine which leads should have continuity and when. The brake-lamp portion of the switch will show continuity when the brake pedal is depressed. When we release the brake pedal, it returns to the up-position. In this position, the brake light switch changes to an open-circuit.

What’s the third brake light on a Honda Civic?

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car. The center brake light, sometimes referred to as the third brake light or stoplight, on your 2001 Honda Civic lights up when you hit the brake pedal and helps prevent you from being rear ended by the cars behind you.

Can you replace a brake light that has fallen out?

Yes, as long as the switch still works. Typically the stop falls out or breaks before the switch fails. You can test this by sticking a piece of cardboard between the hole and the button on the switch. If the lights turn off, then the switch is working and you just need to replace the stop. Thanks!

What does it mean when your brake light is stuck?

While under the dashboard, press in on the pedal or on the button itself and see if the button pops back out when you release it. If it doesn’t, it likely means that the button is sticking in the “on” position. If the button is sticking in the “on” position, it will leave the brake light on all the time.

What causes brake lights to stay on?

Slightly engage the parking brake
Low brake fluid
Imbalance pressure on the brake system

Why do Honda brake lights stay on?

There are lots of reason Why My Honda Accord , Civic Brake Lights Stay On When Car Is Off or put on parking. Some people call it Emergency Brake light came on and stays on when the car is being steered. You can do it yourself or call mobile mechanic Atlanta they will come to you and do it for you or check Honda Website.

Why are brake lights staying on?

If your brake lights are staying on, it will drain your battery. You need to disconnect your battery while the car is off or until you resolve this issue. The most likely cause for the brake lights staying on is the brake light switch sticking closed.

Why does the brake warning light stay on?

Here are some things to look for when you see that your Brake Warning light has been turned on: One of the main reasons the Brake Warning Light comes on is a brake needs to be replaced. Low brake fluid or worn brake pads are other reasons your Brake Warning Light may come on. Leaking brakes are another reason the Brake Warning Light may come on.

How does the brake light work on a Honda Accord?

by Alibaster Smith. The brake switch on a Honda Accord sends an electrical signal to the brake lights. This switch is set to be always “hot.”. This means that power is constantly flowing to the brake lights, even when the ignition is off and there is no key in the ignition.

Where can I buy a brake switch bumper for a Honda?

Go to an auto parts store or Honda dealership and ask for a brake pedal switch bumper. These should cost less than $5. You may have to buy a rubber bumper assortment, which will also do the job.

Go to an auto parts store or Honda dealership and ask for a brake pedal switch bumper. These should cost less than $5. You may have to buy a rubber bumper assortment, which will also do the job.

Unplug the switch. Loosen the adjustment nut with an 18-mm wrench. Once the adjustment nut has been loosened from the mounting plate, the threaded brake light switch can be unscrewed by hand and removed. Screw in a new brake light switch. Tighten adjustment nut.

When do I turn my head lights on, the brake lights turn on?

The head lights turn on when I turn the switch to the second position, as they should. However, the issue is that when I turn the light switch to the first position, the right and left (not the 3rd center light) brake lights turn on as well as the running lights.

What to do if your Honda Civic Wont Stop?

If your Civic is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move. If you mess up fixing the brakes, it doesn’t stop.

Why does my Honda shift not shift out of Park?

The shift interlock system is designed to prevent shifting out of park unless your foot is on the brake. Plus, if the shift mechanism isn’t fully in the park position, you may not be able to remove the key. Here’s how the system works: Fuse #10 (20A) in the underhood fuse box provides power to the brake pedal position switch on the red wire.

What to do if your Honda Civic wont move?

The engine is running fine, but the shifter just won’t move. There are several things you can try to get your Honda Civic moving now. These include checking to see if the parking brake is stuck, finding the shift lock solenoid override (if applicable), and the shift linkage.

What makes a Honda Civic stay in Park?

The shift lock solenoid is the mechanism that keeps you from shifting out of park without your foot on the brake. The good news is that most shift locks have an override button. You will need to find it for your particular model year of Civic (if applicable).

The shift interlock system is designed to prevent shifting out of park unless your foot is on the brake. Plus, if the shift mechanism isn’t fully in the park position, you may not be able to remove the key. Here’s how the system works: Fuse #10 (20A) in the underhood fuse box provides power to the brake pedal position switch on the red wire.

The shift lock solenoid is the mechanism that keeps you from shifting out of park without your foot on the brake. The good news is that most shift locks have an override button. You will need to find it for your particular model year of Civic (if applicable).

Locate the brake light switch near the steering column. If you’re crunched for time and need a temporary fix, you can use the shift release lock next to the shift lever. It is located above and to the right of the the shift lever. Simply insert and push a flat head screwdriver or a key into the little slot. This should disengage the shift lever.

The engine is running fine, but the shifter just won’t move. There are several things you can try to get your Honda Civic moving now. These include checking to see if the parking brake is stuck, finding the shift lock solenoid override (if applicable), and the shift linkage.

What are the symptoms of a bad shift interlock solenoid?

Symptoms of a Bad or Failing Shift Interlock Solenoid. The shift interlock solenoid is a safety mechanism that keeps the driver from shifting out of park when the brake pedal is not pressed down. In addition to the brake pedal being pressed down, the ignition must be in the on position.

What to do if your headlight won’t turn off?

If you know you are having issues with the headlight switch, then that is a great place to start. That dimmer switch does have an interior light setting which will connect the circuit and allow the power supply to continue to the bulbs. If possible, you may want to replace that switch.

Why do headlights stay on after the ignition is shut off?

If so, try this: Turn the lights off before shutting off the ignition. If your lamps are staying on permanently after: 1) ignition shut-off, and then 2) light switch shut off, suspect something in the headlamp-off-delay feature. (This assumes that your vehicle is equipped with this feature.) Thank you for reporting this comment. Undo

What happens if the head light switch fails?

If the headlight switch completely fails it may prevent all of the vehicle’s lights from functioning. You may find that when you go to turn on the headlights, none of the modes will turn on any of the lights.

Why are my Honda Fit headlights not working?

Honda claims that moisture buildup inside the headlight housing is normal and not something that needs to be replaced/addressed. Per Honda anytime there is a reduction of temperature outside the headlamp it will cause condensation inside the headlamp. Moisture inside the headlamp causes refraction of the light and reduces nighttime visibility.

Why do head lights stay on after you turn off the engine?

Your car’s Auto Headlight functionality offers both convenience and safety. The exit delay programmed in means that the lights will stay on after you turn off the engine for a set period of time. You can change how long they stay on to fit your needs. Here’s how to do that:

Why are my high beam headlights not working?

In the case of high-intensity discharge (HID) headlights, or Xenon headlights, there’s an additional component. To get the xenon and salts to plasma state, the HID generator bumps the voltage up to 30,000 V, then stabilizes around 90 V when the bulb is in operation. If the generator fails, the bulb won’t light.

What kind of taillight does a Honda CBR1000RR have?

TST Industries Integrated Taillight for the 2008-2016 Honda CBR1000RR. This integrated taillight removes your rear stock fender lighting and replaces it with this all inclusive taillight and signals unit.

Are there any bright lights on my taillight?

A: Yes – our taillights are extremely bright. This particular taillight is designed with 80 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens. Q: I can’t find the rear signal connectors on my harness.

Where does the sub harness connect to the taillight?

The sub harness contained within the fender terminates in the 4 conductor plug on one end, and has the left and right signal plugs that will connect into your integrated taillight as well as a license plate light connector on the other end. Q: How long will it take for me to receive this once I order it?

Do you need load balancing resistors for integrated tail light?

This integrated taillight removes your rear stock fender lighting and replaces it with this all inclusive taillight and signals unit. Only include Load Balancing Resistors in your order if you are not purchasing an LED Flasher Relay with your new Integrated Tail Light or you have not previously installed an LED Flasher Relay on your motorcycle.

What to do if your brake lights stay on?

If the bulbs are OK, the brake light switch and the rest of the circuit will have to be traced. If you want these steps performed by a certified Mechanic, dispatched by YourMechanic right to your location, please request an electrical circuit diagnostic and the responding certified mechanic will get this problem resolved for you.

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.

Where are the brake lights and tail lights?

In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.

Is it illegal to drive without a brake light?

First of all, you will get pulled over and be fined by a police officer since it is definitely illegal to drive without a working brake light. Second of all, other drivers cannot see you very well in the dark. Without brake lights, it is impossible for them to know whether you are stopping or not, so accidents on the road are very likely.

Navigation