Why are my brake lights and speedometer not working?

ABS, DSC, BRAKE lights on & Speedometer not working. Help! My fuel pump went out so I towed my car home. After installing the new pump, the ABS, DSC, and BRAKE lights are on. Also the Speedometer does not work.

What should I do if my gauges quit working?

The alt wasn’t charging. No tac and no speedometer. The Lights work fine, The odometer is still rollin over, cruise control works, Gear selection indicator read out works fine.. Any ideas? I haven’t dug too far yet, I didn’t have time today (monday) but I have Tuesday off so i was gonna start snooping around.

Why are all the gauges on my GM Truck not working?

Last night I was comin home from the store and realized my speedometer wasn’t working (ins’t the first time) so i hit the dash, then realized NONE of the gauges were working.. Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer.

Why are my brake lights and ABS not working?

My fuel pump went out so I towed my car home. After installing the new pump, the ABS, DSC, and BRAKE lights are on. Also the Speedometer does not work. I read a post where someone had the similar problem after towing.

Why is my odometer not working on my Dodge Ram 1500?

My speedo was possessed, fluctuating while parked and the odometer was advancing, also while parked. The ABS, Check engine, and Brake lights were all on. I first bought a new CPU. wasn’t the problem and took it back, tried a new Gauge cluster from a friends truck, still nothing.

What should I do if my ABS sensor is not working?

Debugging is best done with a DMM; an OBDII scanner can ONLY find “communication errors”, i.e., it cannot tell a bad speed or pressure sensor from a bad ABS control module and will often report the wrong problem because it isn’t inserted BETWEEN the ABS control module and the various sensors (see extensive reports by 540iman on this ).

What does lost communication with anti lock brake system ( ABS ) mean?

Lost Communication With Anti-Lock Brake System (ABS) Control Module. What does that mean? This is a generic communication system diagnostic trouble code that applies to most vehicle makes and models. That may include but are not limited to vehicles from Mazda, Chevrolet, Dodge, VW, Ford, Jeep, GMC, etc.

Why is my odometer not working on my car?

I was driving on the highway until I hit stop and go traffic for construction. While I was putting along, I noticed several things. The speedometer was reading zero, the odometer stopped working, the cruise control could not be activated, the MPG display was not picking up mileage, and the parking brake light came on.

What’s the problem with my speedometer not working?

Re: Speedometer not working and abs and brake light stay… Problem: I have a 2004 Dodge Ram 1500 5.7 L HEMI. My ABS and Parking Brake lights were illuminated, and my speedometer needle would “bounce”. Also when sitting at a stop sign or just sitting idle, the engine would stall, and often times stop running.

Why is the ABS light and brake light not working?

I have a 1998 Dodge Ram 1500 Both the ABS light and the brake light are on. Changed the Speed sensor on the differential it didn’t help. I did replace the RWAL/ABS fuse and now the speedo works. Next I’m checking the front wheel sensors after that idk what to try. Any advise would be helpful. I have a 99′ Dodge RAM 2500.

What to do if your odometer is not working?

To fix it, I “jumped” power from the row above at fuse #6 or 7 it was a blank “not used fuse” that only gives power when the ignition is on. (tested with light) I simply stripped both ends of a short wire and jumped it from top terminal to top terminal. Probelm solved…got my speedo, odom back, and brake n abs light off.

What to do when your brake light stops working?

My cruise also stopped working, and I noticed my brake lights would stay lit anywhere from 2 to 10 seconds after lifting my foot off the brakes. I simply replaced the brake pedal switch located just above the brake pedal. ($10) Took about 2 minutes if that. Please rate and respond to both of my posts if this helps anyone else.

How to fix ABS and brake light on Dodge Ram?

Dodge Ram abs, airbag, brake light, speedometer fix! – YouTube Dodge Ram abs, airbag, brake light, speedometer fix! If playback doesn’t begin shortly, try restarting your device.

Why is the ABS light on and the Speedo not working?

After a recent jump start my daughter’s 1993 C180 developed 2 problems. The ABS light stayed on and the speedo didn’t work. A search of the forums suggested resetting the car by disconnecting the battery but that didn’t work.

Do you need to replace a speed sensor?

If you need to replace a speed sensor, don’t go aftermarket; get as close to OE as possible. Before you send your ABS control module out for rebuilding, please consider opening it up first, post pictures to Bill’s ABS autopsy thread (the rebuilders say they work on previously opened ABS control modules all the time).

What causes the ABS speedometer to stop registering?

However, when the other systems stop functioning properly, you might also see the traction and stability control warning lights too. In rare cases, defective ABS wheel speed sensors can cause the speedometer to stop registering. RELATED: What does the ABS light mean & What Causes it?

When does a bad ABS wheel speed sensor fail?

When the ABS wheel speed sensor fails, the ABS light is probably one of the first sign your will notice of all bad ABS wheel speed sensor symptoms. At first, it might simply cause the ABS warning light to come on. However, when the other systems stop functioning properly, you might also see the traction and stability control warning lights too.

Why is my abs and traction control light on?

Your car has sensors that monitor wheel speed and constantly relay information to the ABS and Traction Control system. When any of your tires have low tire pressure, the ECU ends up sensing an abnormal speed. It may send off inaccurate or flawed information to the ABS or Traction Control, which inadvertently activates their warning signals.

Can a OBDII scanner diagnose ABS sensor problems?

While an OBDII scanner is usually used to diagnose ECU related problems, there are some OBDII scanners available on the market that can also diagnose ABS sensor problems. Invest in such a scanner wisely, as they cost a lot of money but they are extremely useful.

What does it mean when your abs light comes on?

Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.

Can a parking brake light be activated by ABS?

Usually, the brake fluid level sensor and the parking brake are the only two items that can activate the BRAKE light. But, not all vehicles are the same, and some of the earliest ABS systems would trigger both lights simultaneously for any ABS fault.

Navigation