Which is the correct way to turn the crankshaft pulley bolt?
Loosen the large bolt on the top of the tensioner and then loosen the bolt closest to the tensioner pulley. Use the special ford tool and turn the tensioner clockwise to take the tension off of the timing belt and tighten the adjusting bolt lightly to hold it out of your way. Remove the timing belt.
What causes a crankshaft harmonic balancer to slip?
The harmonic balancers found on many vehicles are constructed as two pieces of metal with a rubber layer in between to dampen the vibrations. If the layers separate or slip, the timing marks, which are usually stamped into the front of the pulley, can shift and thus throw off the placement of the timing marks.
What happens if a crankshaft position sensor fails?
The advantage of having a crankshaft position sensor (CKP) is that you do not need a distributor. The end result is less moving parts that can break down. If you have a Sensor (CKP) Failure, your car engine cannot function efficiently and will eventually fail completely.
How to replace the crank pulley on a Honda Civic?
(Related Article: How to Jack Up Your Civic – Honda-Tech.com) If you’re lucky, you’ll be able to remove the bolt on this pulley by using just an impact gun. Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque.
How do you jack up a Honda Civic?
Use a two-post lift if that’s an option. If it’s not and you’re doing this in the driveway, just set the car up on jack stands. Remove the passenger’s side wheel. The crankshaft pulley is the single, large pulley at the bottom of the engine. Figure 1. Diagram of the jacking points. (Related Article: How to Jack Up Your Civic – Honda-Tech.com)
How do you unbolt a crank pulley bolt?
Attach a 17mm socket and attempt to unbolt the crank pulley bolt. In order for this to work, you’ll need an impact gun with more than 600 lb/ft of breakaway torque. If you have one handy, try it out. If it doesn’t work, then use a crank bolt removal tool. If the impact gun didn’t work, the next step is to use the crank bolt removal tool.
Do you need a crankshaft for a Honda Civic?
The crankshaft of your Honda Civic auto is one of the essential parts of the vehicles engine. A quality crankshaft will ensure precision, power, and efficiency in your Civic. To choose the right Honda Civic crankshafts and parts for your Honda, you need to know how these parts work and what types there are.