Which is the best way to adjust a bolt cutter?
Bolt cutters are the most effective innovation in the modern world which provided us with many advantages. Basically, there are two ways of adjusting the bolt cutters. You can adjust it by adjusting jaw with the help of jaw adjusting bolts otherwise you can adjust the bolt cutters by using neck adjustment bolt.
When to loosen and tighten altitude adjustment bolts?
As already mentioned in a prior response, when adjusting the altitude, you must always loosen one bolt first then tighten the other one. The two bolts push against a tongue to raise and lower the mount. When both bolts are tight against it, there should be no play in the altitude adjustment.
What should I use for latitude adjustment bolts?
Stainless bolts and a wrench are an easy solution. You can also, for the South end of the mount, get a shorter bolt that doesn’t interfere with the RA axis at your latitude. As already mentioned in a prior response, when adjusting the altitude, you must always loosen one bolt first then tighten the other one.
Can A J-bolt be used to bend a weight bar?
First, the J-Bolts are soft and bend pretty easy. You should never use force on them, they will bend. When adjusting the altitude release the tension on the front bolt by a couple of turns, then lift up on the counter weight bar to help it along by taking the weight off the rear bolt.
Are camber bolts adjustable?
Technical, chamber bolts are use to hold the upper control arm to the knuckle assembly on wheel. Adjustable camber bolt has more flexibility to align the wheel to the right angle and position. Below image is the adjustable camber bolt: Below is the location where the adjustable camber bolt is installed:
What is a camber bolt?
Camber bolts are cleverly designed eccentric bolts that causes the two things you’re bolting together to offset from each other slightly. On our cars, this means that the camber bolts offset the strut and the knuckle slightly from each other thus changing the camber.
What is a cam bolt?
Typically, cam bolts are made of a high-grade material such as carbon alloy steel, due to the type of high stress and tensile load expected during operation.