Where to find diagnostics menu on Harley Davidson Dyna Glide?
The diagnostics menu is all accessed and read from the digital odometer. Accessing the menu requires inputting a special code using the following buttons and switches. Turn the key ignition to OFF, and Run/Stop switch is to Run. Press and hold the odometer reset button.
How to get a diagnostic code for a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run.
How do you reset the turn signal on a Dyna Glide?
Press left turn signal switch once, and light will flash a number of times to indicate an error code. There is 1.5 seconds between flashes to indicate 1st and 2nd digit of codes and four second pause between codes. Press and hold left switch down for five seconds, and light will flash twice to indicate the TSSM is reset. Turn ignition to off.
Where is the DTC module on a Dyna Glide?
Earlier Dyna models may differ in terms of accessing the DTC module. The diagnostics menu is all accessed and read from the digital odometer. Accessing the menu requires inputting a special code using the following buttons and switches. Turn the key ignition to OFF, and Run/Stop switch is to Run.
Where to find triggered codes on Harley Davidson Dyna Glide?
Figure 3. The module selector menu. After you choose the module, every triggered code will appear. Write down each of the codes and you can either use some of the threads on the forums, or a service manual to compare each one. If by chance there are no codes, the word “none” will appear.
How can I find out if my Dyna Glide is recent?
If by chance there are no codes, the word “none” will appear. If you want to make sure the codes on your Dyna are recent, press and hold the reset button for an additional five seconds, until the word “Clear” comes up. Then run the bike until the CEL lights again and redo the steps.
What is the diagnostic code for a 2007 Harley Davidson?
2007 Harley Davidson Diagnostic Trouble Codes (from Service Manual 99497-07) Getting Codes: 1- Turn Ignition switch to OFF & Run/Stop switch is to Run. 2- Push odometer reset button in & hold. 3- Turn ignition switch to Ignition and release odometer reset button.
What to do if you get an error code on your Harley Davidson?
Turn OFF the ignition switch. Run your bike and shut it down then recheck the DTCs again by repeating steps 1 to 9. If the code is current it will reappear. Press and release the odometer reset button to continue to the next module. Turn Ignition switch to OFF.