Where to find a blown fuse on a Dodge Ram?
Use fuse box diagrams and labels to locate a potentially blown fuse. You’ll find these diagrams either on the panel for the fuse box, in a service manual or online. Identify the fuse connected to your problem circuit and pull it from the fuse box. A blown fuse doesn’t always leave burn marks on or around the fuse.
Why are there no brake lights on my Dodge Ram?
The brake light switch can wear out, which translates into no brake lights on your Dodge Ram. If the bulbs as well as the connections are good and the wires are properly grounded, replace the switch. You will find it under the brake pedal.
Are there any problems with the Dodge Ram?
From bad fuses to bad grounds to a bad wire harness, we’ll move step-by-step through some solutions to these irritating problems. This article applies to the 2nd Generation Dodge Ram (1994-2001). Dodge Rams will occasionally have some light problems, especially on older models.
Where is the fuse on the brake light?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.
The brake light switch can wear out, which translates into no brake lights on your Dodge Ram. If the bulbs as well as the connections are good and the wires are properly grounded, replace the switch. You will find it under the brake pedal.
Use fuse box diagrams and labels to locate a potentially blown fuse. You’ll find these diagrams either on the panel for the fuse box, in a service manual or online. Identify the fuse connected to your problem circuit and pull it from the fuse box. A blown fuse doesn’t always leave burn marks on or around the fuse.
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.
Where are the flasher relays on a Dodge Ram?
Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed. Figure 2. Flasher relay.
How can I tell if my Fuse has blown?
If the thin metal strip has separated, then the fuse has blown. Another way to accurately identify a blown fuse is to use a fuse tester, which costs between $5 to $10 and usually comes with replacement fuses as well. A fuse tester will fit in your glove box, and some types also have an attached fuse puller.
Where is the fuse box on a car?
You can find the instrument panel fuse box under the dashboard of the driver’s side. The lid can easily be removed by pulling it down. Most interior fuse boxes come complete with a plastic fuse puller. If yours is missing, you can use tweezers or needle nose pliers to remove the fuses.
How does a fuse tester work on a Ford truck?
Figure 4. Fuse Tester. Depending on what type you get, it’ll have different ways to notify you that the fuse is good or if it’s blown. Some will have a light that turns green when the fuse is good, some will turn red when it’s bad, others will beep when it’s bad.