Where is the oil filter cap on a Kia Sedona?
The engine cover is held in place by four rubber friction fasteners attached to metal pegs on the top of the engine. Locate the round black plastic oil filter cap at the right (driver) side of the engine. To remove the oil filter cap, you’ll need either a 27mm or a 1 1/16″ wrench or socket.
What do I need for an oil change on a Kia Sedona?
The tools needed to complete this oil change procedure include a 17mm socket with a 3/8″ drive ratchet, a 27mm socket with a 1″ drive ratchet, a floor jack, two jack stands, a used oil catch container, an automotive funnel and 6.02 U.S. quarts of new SAE 5W-30 oil.
How big is the oil drain bolt on a Kia Sedona?
Tighten the oil drain bolt with the 17mm socket and a 3/8″ drive ratchet to just past hand tight. If you have a torque wrench, the service manual specifies that the oil drain bolt torque specification is 26 to 33 lb-ft (35-45 Nm).
How do you remove the oil filter cap?
Locate the round black plastic oil filter cap at the right (driver) side of the engine. To remove the oil filter cap, you’ll need either a 27mm or a 1 1/16″ wrench or socket. Loosen the oil filter cap by turning it in the counterclockwise direction. Once the filter cap is loose, spin it out the rest of the way by hand.
The engine cover is held in place by four rubber friction fasteners attached to metal pegs on the top of the engine. Locate the round black plastic oil filter cap at the right (driver) side of the engine. To remove the oil filter cap, you’ll need either a 27mm or a 1 1/16″ wrench or socket.
Is the Kia Sedona equipped with a transmission filter?
The Kia Sedona is not equipped with a changeable transmission fluid filter. Thanks for using 2CarPros. Com! helpful? Does the 2002 kia sedona mini van have a transmission filter?
The tools needed to complete this oil change procedure include a 17mm socket with a 3/8″ drive ratchet, a 27mm socket with a 1″ drive ratchet, a floor jack, two jack stands, a used oil catch container, an automotive funnel and 6.02 U.S. quarts of new SAE 5W-30 oil.
Tighten the oil drain bolt with the 17mm socket and a 3/8″ drive ratchet to just past hand tight. If you have a torque wrench, the service manual specifies that the oil drain bolt torque specification is 26 to 33 lb-ft (35-45 Nm).