Where is the OBD connector on a Mercedes SLK?
OBD connector location for Mercedes SLK Class – R170 (1996 – 2004) You will find below several pictures which will help you find your OBD connector in your car. The OBD connector is located inside of the vehicle, above the pedals.
What is the location of the OBD port?
The OBD Port, is the location where you can plug in any OBD tool into the vehicle to pull vehicle information. It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device. There are two generations of OBD ports, OBD1 and OBD-ii aka OBD2.
Why is the OBDII port on my Mercedes not working?
I received that cable yesterday and took the car to an Advanced Auto store this morning and they tried their basic scanner with this converter cable on the 38 pin socked and still had no communication or power, so I still can’t read my codes.
What to do if the OBD II scanner doesn’t communicate with the vehicle?
What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.
OBD connector location for Mercedes SLK Class – R170 (1996 – 2004) You will find below several pictures which will help you find your OBD connector in your car. The OBD connector is located inside of the vehicle, above the pedals.
The OBD Port, is the location where you can plug in any OBD tool into the vehicle to pull vehicle information. It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device. There are two generations of OBD ports, OBD1 and OBD-ii aka OBD2.
What’s the difference between OBD 1 and OBD 2?
It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device. There are two generations of OBD ports, OBD1 and OBD-ii aka OBD2. To determine which one you have, if your vehicle was built and sold in the US after January 1st, 1996 you will have an OBD 2 port.
Where is the diagnostic port on a car?
Depending on the make and model, it may or may not be easy to locate. In some models it is located in the center console or on the passenger side of dash. All vehicles sold in the United States from 1996 and after were mandated to haven an OB II diagnostic port installed by the manufacturer. The port on the car it typically black or white.
How to check Mercedes Benz SLK 230 reading fault codes?
Before plugging the scan tool into the car’s diagnostic port, make sure that the car’s battery has at least 11.4 volts with the key off and that the battery cables are clean and secured to the terminals. Plug the scan tool into the data port and turn the ignition on. For other details, refer to the scan tool’s owner’s manual.
Where is the USB port on the R170 SLK?
On the R170 SLK, the port is located on the under-dash panel, behind the hood-release lever (blue arrow). The port is protected by a plastic cover, which pivots away so that the cable can be plugged in.
Where are the diagnostic connector pins on a Mercedes OBD II?
Mercedes OBD II diagnostic connector pinout Pin Number Pin Name Description 1 K-Line Ignition control (EZS), air-conditioner 3 TNA TD engine rotation speed 4,5 GND Ground 6 CAN-high CAN-High (including AirBag system in W20
Before plugging the scan tool into the car’s diagnostic port, make sure that the car’s battery has at least 11.4 volts with the key off and that the battery cables are clean and secured to the terminals. Plug the scan tool into the data port and turn the ignition on. For other details, refer to the scan tool’s owner’s manual.
On the R170 SLK, the port is located on the under-dash panel, behind the hood-release lever (blue arrow). The port is protected by a plastic cover, which pivots away so that the cable can be plugged in.