Where is the fuel filter located on a 2010 Jeep Liberty?
The fuel filter is always going to be found between the fuel tank and the engine. For most vehicles, the fuel filter is located inside the top of the fuel tank, right where it connects with the fuel line, although on some cars if might be elsewhere along the fuel line.
When to replace the fuel filter on a Jeep Liberty?
The Jeep Liberty is no exception to this rule. Making sure to change the fuel filter every 60,000 miles will prevent contaminants from entering the engine and causing damage or possibly engine failure. Replacing your vehicle’s engine can prove costly and time consuming. With this simple fuel filter replacement, you can save time and money.
Where is the fuel tank located on a Jeep Liberty?
OPERATION Fuel is picked up in the fuel tank by the fuel pump module. This module is located on the bottom of the fuel tank. A fuel return system is provided within the fuel pump module using check valves. A separate fuel return line from the engine to the tank is not used. The fuel pressure regulator and the main fuel filter are not combined.
What is the check valve on a Jeep Liberty?
Check Valve Operation: The electric fuel pump outlet contains a one-way check valve to prevent fuel flow back into the tank and to maintain fuel supply line pressure (engine warm) when pump is not oper- ational. It is also used to keep the fuel supply line full of gasoline when pump is not operational.
Where is the fuel pump relay on a Jeep Liberty?
STANDARD PROCEDURE – FUEL SYSTEM PRESSURE RELEASE Use following procedure if the fuel injector rail is, or is not equipped with a fuel pressure test port. (1) Remove fuel fill cap. (2) Remove fuel pump relay from Power Distribu- tion Center (PDC). For location of relay, refer to label on underside of PDC cover.
The Jeep Liberty is no exception to this rule. Making sure to change the fuel filter every 60,000 miles will prevent contaminants from entering the engine and causing damage or possibly engine failure. Replacing your vehicle’s engine can prove costly and time consuming. With this simple fuel filter replacement, you can save time and money.
OPERATION Fuel is picked up in the fuel tank by the fuel pump module. This module is located on the bottom of the fuel tank. A fuel return system is provided within the fuel pump module using check valves. A separate fuel return line from the engine to the tank is not used. The fuel pressure regulator and the main fuel filter are not combined.
Check Valve Operation: The electric fuel pump outlet contains a one-way check valve to prevent fuel flow back into the tank and to maintain fuel supply line pressure (engine warm) when pump is not oper- ational. It is also used to keep the fuel supply line full of gasoline when pump is not operational.
STANDARD PROCEDURE – FUEL SYSTEM PRESSURE RELEASE Use following procedure if the fuel injector rail is, or is not equipped with a fuel pressure test port. (1) Remove fuel fill cap. (2) Remove fuel pump relay from Power Distribu- tion Center (PDC). For location of relay, refer to label on underside of PDC cover.