Where is the Check Engine light on a Jeep Grand Cherokee?

In Jeep Grand Cherokees, the port is usually found under the steering wheel, near the driver’s side door. After reading the code and diagnosing and fixing the problem, the user can select an option on the scanner to clear all diagnostic codes, which should reset the check engine light.

Why does my check engine light keep coming on?

A failing oxygen sensor, also known as an O2 sensor, is one of the most common reasons for that Jeep check engine light to come on. And the tricky thing with the O2 sensor is that the car will continue to drive well so you might want to dismiss the light. But an O2 sensor code will surely show up in a diagnostic test.

What are the Check Engine light codes for Chrysler?

P1295Loss Of 5 Volts To TP Sensor P1296Loss Of 5 Volts To MAP Sensor P1297No Change In MAP From Start To Run P1298Lean Operation At Wide Open Throttle P1299Vacuum Leak Found (IAC Fully Seated)

What can I do to clear check engine light?

A “hard reset” is another option. This involves disconnecting the battery and draining all power from the car’s electrical system by running the lights. This deprives the OBD system of current, erasing its memory.

What does the Check Engine light on a Jeep Grand Cherokee mean?

Once a Jeep Grand Cherokee’s check engine light illuminates, it means the On-Board Diagnostic system has repeatedly detected an engine malfunction.

Why is my Jeep Cherokee rough at a stop light?

Filled radiator with antifreeze, now isn’t running hot, but sitting at a stop light in drive, bad vibration, but in park or driving down the road, nothing. Also, the more coolant I put in the radiator while jeep is running, the rougher it sounds.

How can I troubleshoot my Jeep Grand Cherokee?

A problem has to repeat itself several times before the Grand Cherokee’s On-Board Diagnostic system will give it a “fault” status. There are ways to troubleshoot the system, and that involves examining the fault codes.

Are there any problems with the Jeep Cherokee?

11 problems related to check engine light on have been reported for the 2016 Jeep Cherokee. The most recently reported issues are listed below. Please also check out the statistics and reliability analysis of the 2016 Jeep Cherokee based on all problems reported for the 2016 Cherokee.

Is there anything you can do about 2016 Jeep Cherokee?

Is there anything you can do? should I bring my Jeep to a Jeep dealer??. When turning, left or right my 2016 Jeep Cherokee stalled. It emitted a ding sound and flashed the message �shift gear to park first�. The battery light and check engine light illuminated and the engine shut itself off.

Why does my Jeep Cherokee shut off without warning?

The service advisors told me it is an issue with my 4cyl model and that it burns to much oil between oil changes and will shut off without warning or a low oil light present. How is this remotely ok? This is a HUGE safety issue!!

What to do if your engine light is on on a Jeep Cherokee?

Engine Light Is On: 2014-2019 Jeep Cherokee – What to Do – 2015 Jeep Cherokee Latitude 2.4L 4 Cyl. This free video provides the steps to diagnose and clear a check engine light on a 2015 Jeep Cherokee Latitude 2.4L 4 Cyl..

Why does my Jeep Cherokee not turn on?

Their notes say “VERIFIED THE CONCERN FOUND CODE B200-14 IGNITION RUN START CIRCUIT OPEN OR SHORT TO GROUND. FOUND THE VEHICLE HAS TO BE HOT AFTER A DRIVE CYCLE FOR THE ISSUE TO ACT UP. TESTED THE RUN/START RELAY FOUND THE 5/3 VOLTS ON THE GROUND SIDE.

What are the issues with my 2017 Jeep Cherokee?

While driving the service shifter lighter appears on dash and shifter position lights all light randomly and has been becoming more frequent. They turn off once I stop, turn the car off, and restart the car. I have read models previously have been recalled for this issue but not 2017 which appears to have the same issues.

What are the warning lights on a jeep?

The following are warning lights and indicators found in vehicles built by Jeep. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are nearly 80 of them so be patient!

What to do if your check engine light is on?

The video above shows how to locate the on board diagnostics (OBD) plug on your 2015 Cherokee, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your Cherokee.

What to do if your check engine light is flashing?

Flashing Check Engine Light: If your check engine light is flashing, stop driving your Cherokee and have it towed to your nearest mechanic – you probably have a very serious problem with your car and you risk ruining your engine by driving it.

Is there a recall on a 2015 Jeep Grand Cherokee?

Tl the contact owns a 2015 Jeep Grand Cherokee. The contact received notification of NHTSA campaign number: 20v699000 (engine and engine cooling) however, the part to do the recall repair was unavailable.

Why is the Mal Function light on on my Jeep Grand Cherokee?

A $58,000 Diesel Summit Jeep And Dealer Doesn’t Seem To Be Able To Fix The Mal Function Light Coming On. They Claim To Have Ordered An Oxygen Sensor But After More Than A Month Haven’t Heard Anything. I Called And Was Told It’s On Order.

Are there any problems with the 2014 Jeep Grand Cherokee?

CarComplaints.com Notes: The 2014 (and 2015) Jeep Grand Cherokee have a serious defect trend of transmission complaints. Most of the complaints are for rough shifting — things like jerking & hesitation when shifting gears.

What to do if check engine light is on on 2014 Jeep Cherokee?

The video above shows how to locate the on board diagnostics (OBD) plug on your 2014 Cherokee, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your Cherokee.

What is the diagnostic code for a jeep check engine light?

Refer to our Generic OBD II code list for definitions on all other Jeep diagnostic trouble codes. Manufacturer Specific Codes P1105Open Or Shorted Condition Detected In The Baro Read Solenoid Control Circuit – Read Our Article on Automotive Circuit TestingFor Help With This Jeep Check Engine Light Code P1192Inlet Air Temp. Circuit Low

What is the code for the Jeep Grand Cherokee?

For instance, code 41 will be represented by four flashes, a pause, and then one pause. Look up the Chrysler’s flash codes online (See References). Since the Grand Cherokee’s diagnostic system predates Environmental Protection Agency standardization, other manufacturer’s codes will not help.

What happens if you reset check engine light?

Warnings. Erasing codes by disconnecting your vehicle’s battery can also clear out the memory for your radio and other on-board components. This method is recommended as a last resort. The emissions monitors in your vehicle will register being reset, so you will not pass emissions if you bring in a car with the codes being reset.

Why does the Check Engine light keep blinking?

When the ECU ( engine control unit) detects a problem that it is unable to regulate, it then turns on the check engine light on your dashboard. This check light will either keep on glowing or will blink, depending on the nature of the fault. If the engine check is on regularly then it means that there is a problem but not an emergency.

What is the engine code on a Jeep Wrangler?

By determining the engine code associated with the warning light you find the root of the problem. An engine code is also referred to as a Diagnostic Trouble Code, or DTC. Wrangler DTC codes can range from low battery voltage to sensor issues, depicted by a string of digits.

Where to find check engine light codes on Jeep?

These are listed in numerical order for easy searching. When retrieving Jeep check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

Why is my Check Engine light not working?

P0032 code came up went for check engine light. Went to get it looked at. Tech then told me that it was a miss drill of the heads causing the misfire to happen. The tech then also stated it was a known mopar issue in Jeep Grand Cherokee line.

Where can I find the Acura check engine light code?

Look up your code definition. This tells you where to start testing. If you are unsure of any abbreviations, check out the acronym list by clicking on the link at the left.

What does check engine light on Jeep Cherokee mean?

by Jeffrey Caldwell. Late model vehicles such as the Jeep Cherokee utilize a system known as On Board Diagnostics, or OBD II, to optimize the performance of the vehicle’s emissions components. When one of these components fails, it will send a signal to the engine computer, which will trigger the check engine light in the dash.

How do I clear the light on my Jeep Cherokee?

If this is the case with your Cherokee, clearing the light is simple using a diagnostic code scanner. Connect the diagnostic scanner cable to the vehicle’s diagnostic port. It will be located below the dash on the driver’s side of the vehicle. Insert the key into the ignition and turn the key to the run position. Do not start the engine.

Where is the diagnostic code scanner on a Jeep Cherokee?

Can you check the engine code on a Jeep Wrangler?

When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move. This generation of Wranglers and Cherokees had the most simple diagnostics of any other. You need no special scanner to get the trouble code.

Why does my check engine light keep blinking?

If the check engine light in your Jeep Grand Cherokee starts flashing, that means that the problem needs hasty attention and your Jeep should be brought in promptly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.

What’s the code on the Check Engine light?

Grab a pen and paper and count the number times the check engine light flashes at you. It will be a code. Long pauses will be used to separate fault codes. The codes themselves are two digits.

What causes the Check Engine light to come on on a Jeep Grand Cherokee?

The check engine light on your Jeep Grand Cherokee will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it’s tightened, the light will turn itself off.

What does the Dashboard Light on a jeep mean?

This dashboard light blinks on your Jeep Grand Cherokee dashboard to indicate that you may not firmly close the door of your Cherokee. So make sure to shut all the doors adequately. This dashboard light illuminates your Jeep Grand Cherokee Instrumental cluster to notify the engine coolant temperature dropping in your Cherokee.

How to check for diagnostic trouble codes on a Jeep Grand Cherokee?

If you own a 1999-2010 Jeep Grand Cherokee, and your ‘Check Engine’ light is on, you can easily check for Diagnostic Trouble Codes (DTC’s) without a scanner using just a simple key sequence. Steps. Get into your vehicle and make sure the hood, rear tailgate, and all doors on your vehicle are shut.

How can I clear the OBD light on my Cherokee?

OBD II systems are extremely sensitive and can sometimes trigger without any real fault in the emissions system. If this is the case with your Cherokee, clearing the light is simple using a diagnostic code scanner. Connect the diagnostic scanner cable to the vehicle’s diagnostic port.

When does the Check Engine light come on?

The Check Engine Light may come on if you’re having issues with your TPS. This isn’t always the case though, so don’t wait for the Check Engine Light to illuminate before you get any of the above symptoms checked out. Have your vehicle checked for trouble codes to verify the source of the problem.

How does OBD work on a Jeep Cherokee?

Late model vehicles such as the Jeep Cherokee utilize a system known as On Board Diagnostics, or OBD II, to optimize the performance of the vehicle’s emissions components. When one of these components fails, it will send a signal to the engine computer, which will trigger the check engine light in the dash.

Are there any problems with the Jeep Grand Cherokee?

Jeep Grand Cherokee owners have reported 139 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Grand Cherokee based on all problems reported for the Grand Cherokee.

It is important to ascertain the cause of the light before clearing it. A check engine light could indicate a catastrophic problem in the Jeep’s engine, or it may be something as simple as a loose gas cap. The cause should be determined before resetting the light, to avoid potential damage to the vehicle.

What’s the Flash code on a Jeep Grand Cherokee?

The codes themselves are two digits. The first number will flash. There will then be a pause before the second number flashes. For instance, code 41 will be represented by four flashes, a pause, and then one pause. Look up the Chrysler’s flash codes online (See References).

We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car. A check engine light can indicate a broad spectrum of problems with your 2000 Jeep Cherokee.

How many horsepower does a Jeep Cherokee have?

By 1997, the XJ Cherokee was still popular in police and government fleets. As expected, production of the Cherokee Special Service Package continued for the 1997 model year into the 2001 model year. It still had the same features as the 1996 Cherokee Special Service Package, but the engine now produced 195 hp (145 kW).

Is there a two door version of the Jeep Cherokee?

Both two- and four-door versions of the XJ Cherokee were offered throughout its lifetime, each having exactly the same track and wheelbase measurements. Two-door models, however, received longer doors and front seats that could fold forward to assist in rear passenger entry and exit.

What does a flashing check engine light mean?

A flashing check engine light is your Jeep Cherokee’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.

What should I do if my check engine light is on?

This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Cherokee, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

What to do if your engine light is on on a 1999 Jeep Grand Cherokee?

1999 Jeep Grand Cherokee Limited 4.0L 6 Cyl. Check for a blown engine fuse Odd electrical problems that come out of nowhere can often signify a blown engine fuse – check and change yours here! 1999 Jeep Grand Cherokee Limited 4.0L 6 Cyl. Change a rear wiper blade The rear wiper that you forgot you had until it streaks horrifically on a rainy day?

Why is the Check Engine light on on my Jeep?

You’re driving along when you notice that orange, engine-shaped icon lights up on your instrument cluster. Once you determine it’s your Jeep check engine light, you might feel alarmed. Or maybe you already know that’s what it is.

What should I do if my engine light is on?

The video also provides steps on how to read the 2000 Jeep Cherokee Sport 4.0L 6 Cyl. (4 Door) trouble code About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Jeep Cherokee 2000 Check Engine Light / Diagnose Engine Light Is On: 1997-2001 Jeep Cherokee – What to Do 1.

How do I Reset my Jeep Grand Cherokee?

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

What kind of CRD does a Jeep Grand Cherokee have?

I have a 2007 Jeep Grand Cherokee with the 3.0 CRD. Got the dreaded P1270 code. Removed the intake manifolds, cleaned them thoroughly, and replaced the swirl valve motor. Now the ETC light comes on and it throws P1270 without setting the check engine light. It does however put the jeep into limited power.

When one of these components fails, it will send a signal to the engine computer, which will trigger the check engine light in the dash. OBD II systems are extremely sensitive and can sometimes trigger without any real fault in the emissions system.

What kind of light is a check engine light?

It might even be something you can repair yourself. In most cases when the check engine light comes on, it will be a constant yellow light. Less common are either a red light, or flashing yellow. There’s a world of difference between the two. The constant yellow light is a true warning light.

Why does the Check Engine light come on on my Jeep Grand Cherokee?

Oxygen sensors can change the way that your Grand Cherokee’s engine runs. Most of the time, the check engine light will come on. It’s a good thing that the check engine light would come on, as there is more than one oxygen sensor, and they can be difficult to get to and test.

Can a bad oxygen sensor cause a Jeep Grand Cherokee to go bad?

Your Grand Cherokee can exhibit symptoms when the Oxygen sensor has gone bad. Or, it may exhibit none at all. Often enough, the only sign of the problem at all is the service engine soon light being on. The good news is, if you end up discovering that the oxygen sensor is bad, they really aren’t that expensive to replace.

How to know if your Jeep Grand Cherokee has a DTC?

1.) Place the key into the ignition slot. 2.) Turn your key from OFF to ON four to five times in succession (do NOT start your vehicle). 3.) On the fourth or fifth time you turn your ignition ON, leave it in the ON position. 4.) Count the number of times your ‘Check Engine’ light flashes. This is your first number.

What happens when the O2 sensor goes bad on a Jeep Grand Cherokee?

When an O2 (oxygen) sensor go bad, it’ll cause your Jeep Grand Cherokee ‘s engine to run less efficiently. Your Grand Cherokee can exhibit symptoms when the Oxygen sensor has gone bad. Or, it may exhibit none at all. Often enough, the only sign of the problem at all is the service engine soon light being on.

What are the diagnostic codes for a Jeep Grand Cherokee?

Oxygen sensor voltage too low, tested after cold start. (Upstream or Downstream) Left oxygen sensor input voltage maintained above the normal operating temperature. Engine coolant temperature sensor above or below acceptable voltage. Intake air temperature sensor input above or below acceptable voltage..

What happens when the throttle position sensor fails?

The throttle position sensor can fail in several ways, all of which result in poor fuel economy at best, and performance limitations that may create safety hazard for you and other motorists at worst. This sensor can fail gradually, or all at once. In most cases, the Check Engine Light is illuminated if a TPS failure is detected.

How to troubleshoot a bad fuel injector in a Jeep Wrangler?

TIP 1: The engine in your 4.0L Jeep Cherokee (Grand Cherokee, Wrangler) needs to be at operating temperature to get an accurate snapshot of the condition of the fuel injectors. TIP 2: If your Jeep doesn’t start, you don’t have to worry about performing the test with a warmed up engine.

How long does it take to test a fuel injector in a jeep?

TIP 2: If your Jeep doesn’t start, you don’t have to worry about performing the test with a warmed up engine. What makes testing the fuel injectors on your Jeep’s 4.0L 6 cylinder engine is that they are in plain view and easy to get to. This makes it possible to check for a bad fuel injector in about 10 to 20 minutes.

Can a Jeep Grand Cherokee go into failsafe mode?

You will get U0404 and P0700 codes. The Jeep will not move, hesitate, buck, go into failsafe mode, or drive normal. If it does any of the above, pull over and restart the Jeep. Mine bucked and started to run normal after the lights flashed and the MIL or check engine light went on. Drove it 150 miles no problem. MIL or check engine light stayed on.

P1295Loss Of 5 Volts To TP Sensor P1296Loss Of 5 Volts To MAP Sensor P1297No Change In MAP From Start To Run P1298Lean Operation At Wide Open Throttle P1299Vacuum Leak Found (IAC Fully Seated)

Intermittent Check Engine Light: If the check engine light on your 2000 Cherokee is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue.

When did the Jeep Grand Cherokee 5.9L come out?

While Jeep produced its highly successful “ZJ” Grand Cherokee from 1993 through 1998, the company offered the 5.9L Limited such as the one featured here for the last year of production only to keep sales strong before its replacement entered production.

What to do when your check engine light comes on?

If you notice your check engine light turned on immediately after filling your tank, pull over and check first to see if the cap is loose. If so, simply tighten it. If that doesn’t do the trick, then buy a replacement gas cap at an auto parts store.

Why does my check engine light go off on my Jeep Wrangler?

Manny Jeep Wrangler owners have at some point experienced the CHECK ENGINE light but no error codes shows up on the instrument panel. Is this something to worry about? Most reports indicate that the Check engine light went away after a batter reset or after a few days of normal driving.

How to check engine code on Jeep Wrangler JK?

If you drive a JEEP Wrangler JK, you can check engine fault codes by inserting the key into the ignition and turning it 3x to the run position without starting the vehicle. Turning the key 3x tells the OBD (On Board Diagnostics) computer there has been 3 bad runs with the same error and it throws out a code on the instrument panel.

How to clear check engine light on Jeep Wrangler?

How to Clear Codes on Jeep Wrangler 1 Make sure the engine is not running and key is out of the ignition 2 Disconnect the battery terminals 3 Reconnect battery terminals 4 Insert and turn the ignition key to the run position without starting. 5 All error codes are cleared and CHECK ENGINE icon disappeared.

How can I reset the fault code on my Jeep Cherokee?

The Jeep Cherokee’s engine includes a computer that monitors several sensors. If a sensor reports a problem, the computer will display the check engine light on the dashboard. This tells the driver there is a problem that needs to be assessed. Once the problem is corrected, you can reset the fault codes yourself.

Why is my catalytic converter not working in my Jeep?

If the wire is faulty, then the fuel and air mixture in its respective cylinder can’t ignite. This causes the rough idling. So even though your Jeep may still be running with a faulty wire, long-term use of it could cause serious damage to your catalytic converter. 4. Catalytic Converter

What kind of oil light does a 2005 Jeep have?

Started yesterday, every time I come to a stop “ding” red oil light comes on. If I give gas to start moving it goes off. Come to a stop, “ding” on. Begin driving… well, you get the point. It’s a 2005 5.7 with 122222 miles on it.

Why does the oil light come on on my Grand Cherokee?

Click to expand… Same issues as on my 03 grand cherokee and my Oldsmobile when i had it. Replace the oil pressure sensor/sender if you have not already. Its the culprit 9 times outta ten. Replaced the oils pressure switch and it still is having problems. It will randomly die, then the oil light comes on.

What to do if your Jeep Cherokee is leaking oil?

2014 Jeep Cherokee Latitude 3.2L V6 Plug the oil leak If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires’ rubber 2014 Jeep Cherokee Latitude 3.2L V6

What to do if check engine light is on but no code?

Check the make and model of your reader to see what it is built for and if all else fails, head into a parts store and they should be able to read the issue at no cost to you. No code being generated on the reader does not mean the driver is in the clear.

What should I do if my check engine light comes on?

While yes, both yourself and AutoZone can read the engine computer’s stored codes, and through Fix Finder, determine likely causes based on thousands of mechanics intel, none of these can pinpoint with 100% accuracy exactly why the CEL came on.

What causes a misfire on a check engine light?

If you have a #2 misfire and move the #2 coil to #4, for example, then the misfire moves to #4, you know the coil is suspect. Defective fuel injector: If a fuel injector fails to deliver the proper amount of fuel to a cylinder, you will have a misfire.

Why does my check engine light come on when I leave my cap off?

If you leave your gas cap off accidentally, you’ll notice this light rather quickly. These leaks in the gas tank recirculation (also known as EVAP emission control) system are often grouped as “small” or “large” leaks.

Why does my check engine light turn orange?

When it runs into an issue that the ECU cannot correct, the check engine light (CEL) starts glowing. The light is typically yellow or orange, and features an image of engine with text telling the driver to check or service the engine or powertrain. The engine computer stores a diagnostic code when the light begins glowing.

When to check check engine light on Jeep Cherokee?

Steady Check Engine Light: If your check engine light is on every time you operate your Cherokee, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

Why does my Jeep Cherokee have a check engine light?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Cherokee’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .

Why does my Jeep Cherokee have low oil?

Dealership claims low oil between oil changes, we have the oil changed regularly at the dealership and do not exceed the recommended mileage between changes. This has occurred on main roads during times of high traffic and has put my family in danger on several occasions.

How much does a 2015 Jeep Cherokee cost?

Enter your zip code: My 2015 Jeep Cherokee had the service engine light turn on, as a result, needed at new Canister Purge Valve. Total cost with install was $289.00 – The vehicle struggled to turn on at times, fuel economy went down. I was headed into town, went out to my car, and it would not start AGAIN!!!!!

What’s the Check Engine light on a 2015 Jeep Cherokee?

Check engine light and stop/start assist service light came on and MPH dropped from 55 to 30 MPH and transmission temp rose to 210 degrees. It’s a new 2015 Jeep Cherokee Latitude, driven daily to and from work and has 8800 miles on it. A $30,000 piece of sh*t!

What are the sensors on a 2015 Jeep Grand Cherokee?

Every 2015 Jeep Grand Cherokee was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its exacting systems. The sensors are constantly detecting conditions while sending data to the electronic control squad.

Are there any problems with the 1999 Jeep Grand Cherokee?

Perhaps part of your marketing should say after ten years you should throw it away because we are not going to fix it. The contact owns a 1999 Jeep Grand Cherokee. The contact stated that while driving at various speeds, the vehicle stalled with the check engine warning light illuminated. The contact was able to restart the vehicle.

Why does my 1999 Jeep Grand Cherokee make a popping sound?

Suspension causes “death wobble” at cruising speeds. Engine happens anytime engine is running producing large quantities of smoke from tailpipe. The contact owns a 1999 Jeep Grand Cherokee. While driving at approximately 35 mph, the vehicle jerked violently as it decelerated and emitted an abnormal popping sound.

How do I Turn Off the Jeep Grand Cherokee check engine light?

To turn off the Jeep Grand Cherokee check engine light, turn the ignition switch to ON but don’t start the vehicle. Press the gas pedal 3 times within 10 seconds and turn the ignition off. Wait 10 seconds and start the engine.

Where can I buy parts for my Jeep Cherokee?

Hear from other customers via the 1,892 reviews on parts for your Jeep Cherokee. Shop online, find the best price on the right product, and have it shipped right to your door.

Navigation