Where is the brake transmission interlock override access door?
The Brake Transmission Shift Interlock override access door is located under the center console cup holder mat. Pull up on the cup holder mat, remove the access door, and use a long slim tool such as a screwdriver to push down on the override lever; the shifter knob will be able to be moved. Click to expand…
How does a brake-shift interlock work on a car?
The brake-shift interlock is designed to prevent the vehicle from being shifted out of park, without the brakes being applied. Engineers have designed many different systems, but they all require brake application to release the shifter from the park position. Most systems use a magnetic solenoid or an actuator that blocks the path of the shifter.
How can I override the shift lever in my Jeep?
Firmly apply the parking brake. 2. Turn the engine OFF. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6.
What are the symptoms of a bad shift interlock solenoid?
Symptoms of a Bad or Failing Shift Interlock Solenoid. The shift interlock solenoid is a safety mechanism that keeps the driver from shifting out of park when the brake pedal is not pressed down. In addition to the brake pedal being pressed down, the ignition must be in the on position.
Firmly apply the parking brake. 2. Turn the engine OFF. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4. Using a screwdriver or similar tool, carefully remove the shift lever override access cover, located on the bottom of the cupholder. 5. Press and maintain firm pressure on the brake pedal. 6.
Symptoms of a Bad or Failing Shift Interlock Solenoid. The shift interlock solenoid is a safety mechanism that keeps the driver from shifting out of park when the brake pedal is not pressed down. In addition to the brake pedal being pressed down, the ignition must be in the on position.
What to do when your shift lock is stuck?
It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever. Normally, the slot is plugged with a small plastic cap. Remove the cap. 4) Insert a small screwdriver, nail file, key or similarly shaped object into the override slot, push down and hold.
What do you do when your shifter is stuck in Park?
By law, all 2010 and newer vehicles are equipped with brake-shift interlock. 1) Set the emergency brake. 2) Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position. It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever.