Where is the axle nut on a Lexus?
The axle nut is on the axle with a lot of torque. Make sure the impact gun you’re using is fully charged or connected to a full air compressor. Figure 8. Remove the axle nut. Remove the two upper 22mm bolts completely from shock absorber. Using a pry bar, pry the steering knuckle off of assembly.
How do you replace a wheel hub bearing?
Pry the steering knuckle off. Take the hub assembly and new bearing to a machine shop. They will use a special service tool to “press” the bearing and race into place. Once this is done, installation of all components is reverse of removal. Refer to the links below for proper torque procedures. Figure 10. Take the hub assembly to an auto shop.
What causes a loose wheel bearing on a Lexus?
Loose steering is often caused by a loose wheel hub bearing. Here’s a step-by-step guide to replacing it. This article applies to the Lexus (2005-2013).
Where are the shock absorber bolts on a Lexus?
Using a 22mm socket, loosen but do not remove the upper shock absorber bolts located under the hood on top of the wheel well. Figure 7. Loosen the upper shock absorber bolts. The axle nut is on the axle with a lot of torque. Make sure the impact gun you’re using is fully charged or connected to a full air compressor.
The axle nut is on the axle with a lot of torque. Make sure the impact gun you’re using is fully charged or connected to a full air compressor. Figure 8. Remove the axle nut. Remove the two upper 22mm bolts completely from shock absorber. Using a pry bar, pry the steering knuckle off of assembly.
How do you replace a wheel bearing on a Lexus?
Using a 17mm socket, undo the nut on the bottom of the tie rod. Using pliers, remove the cotter pin; save and set aside. Using the gear puller or control arm puller, release the control arm.
Using a 22mm socket, loosen but do not remove the upper shock absorber bolts located under the hood on top of the wheel well. Figure 7. Loosen the upper shock absorber bolts. The axle nut is on the axle with a lot of torque. Make sure the impact gun you’re using is fully charged or connected to a full air compressor.
What to do if your Lexus wheel lock comes loose?
From there it is just a combination of elbow grease and hammering. Don’t be dismayed if the 19mm socket comes loose – it may take several attempts of hammering the socket into place to get a good bite on the outside of the locking lug nut.
How do you replace a wheel on a Lexus?
Loosen lug nuts on the wheel. Raise the car using a jack and secure the vehicle with jack stands. Figure 2. Raise and secure the vehicle. Once you have the wheel off, you can begin to remove the brake caliper and the disc brake. Figure 3. Remove brake components.
What causes a Lexus steering wheel to loose?
Loose steering is often caused by a loose wheel hub bearing. Here’s a step-by-step guide to replacing it. This article applies to the Lexus (2005-2013). If you ever feel a little play or wiggle room in your Lexus’ steering wheel, you probably have a bad wheel hub bearing.