Where is the air conditioner belt on a car?
The air conditioner belt on most cars is on a separate belt and pulley from the serpentine belt that drives all of the other devices.
How do you tighten an air conditioner belt?
When the tensioner is fully rotated, ease the belt onto the pulley and release the tensioner to tighten the belt. Start the vehicle and turn on the air conditioner. If the air conditioner belt squeals when the air conditioning unit engages, turn the car off and tighten this belt again.
How is an AC compressor driven off a belt?
Unless you drive a newfangled hybrid or electric car, the AC compressor in your vehicle is driven off a belt. The belt is strapped to the engine crankshaft balancer, which turns with the engine.
What to do if your AC belt is bad?
If you suspect that you may be having a problem with the belt, or need to have your AC belt replaced, this is something that any professional technician, such as one from YourMechanic, should be able to take care of for you. The most popular service booked by readers of this article is Heating AC Inspection.
The air conditioner belt on most cars is on a separate belt and pulley from the serpentine belt that drives all of the other devices.
When the tensioner is fully rotated, ease the belt onto the pulley and release the tensioner to tighten the belt. Start the vehicle and turn on the air conditioner. If the air conditioner belt squeals when the air conditioning unit engages, turn the car off and tighten this belt again.
Why is my serpentine belt on my air conditioner not working?
Since the serpentine belt keeps the air conditioner functional, a bad serpentine belt will take that function away from it. If you turn on your air conditioner and see that it does not blow out cool air from the air vents, this could possibly be due to a bad serpentine belt.
If you suspect that you may be having a problem with the belt, or need to have your AC belt replaced, this is something that any professional technician, such as one from YourMechanic, should be able to take care of for you. The most popular service booked by readers of this article is Heating AC Inspection.
How do you change the a / C belt on a car?
Use the socket and ratchet or wrench to tighten the adjustment bolt to restore the tension to the new belt. The belt should be tight enough that it does not move easily when pushed down or pulled up. Lower the serpentine belt back into the vehicle.
How do you change the serpentine belt on a car?
Locate the belt tensioner. This a small pulley usually located below and off to one side of the alternator. Use a ratchet and socket to turn the nut on the tensioner pulley. This will move the pulley and let tension off of the serpentine belt so you can remove it. On most cars, you will turn the nut clockwise to relieve the pressure.
https://www.youtube.com/watch?v=Vd-SIInlQdI