Where do I get drivers for Allen Bradley SLC 500?
It comes installed as part of RSLogix 500, or you can download RSLinx Classic Lite for free from Rockwell. Once you plug in your cable and Windows installs any necessary drivers, it should show up in Device Manager as a COM port. Open RSLinx and go to Communications -> Configure Drivers.
What kind of Ethernet cable do I need for a SLC 500?
This protocol requires a special USB converter, the 1747-UIC, which you can order from A-B or find a number of 3rd party versions online. In addition, you will need the female-to-female null modem crossover DB9 serial cable or a straight-through RJ45 ethernet cable, depending on which port you want to connect to.
When did the SLC 500 series come out?
With a large number of legacy systems, the original programming cables and software are often long lost by the time you want to make updates or need to troubleshoot an issue. One of the most popular series of PLCs from the 1990s to mid-2000s is the Allen-Bradly SLC 500 series: SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, and SLC 5/05.
What kind of port does the SLC 5 / 01 use?
As you can see, each model features a slightly different set of physical ports and protocols. The two most common ways to connect are DH-485 and DF1. The SLC 5/01, 5/02, and 5/03 use DH-485 via their RS485 8-pin RJ45 jack (which is the same physical connector as Ethernet, but it won’t work if you plug it directly into your computer!).
It comes installed as part of RSLogix 500, or you can download RSLinx Classic Lite for free from Rockwell. Once you plug in your cable and Windows installs any necessary drivers, it should show up in Device Manager as a COM port. Open RSLinx and go to Communications -> Configure Drivers.
What to do if Windows dont sync with sunroof?
Alternative steps if re-synch procedure doesn’t work. With the key in position 1 or 2, push the window button until it is completely open. Hold the button for 5 seconds. Pull it up to close and hold again for another 5 seconds. Check to see if the problem is fixed. Repeat steps 2 and 3 as needed.
How do I re sync my Mercedes sunroof?
Otherwise, re-syncing will not work. Put the key to position 1 or 2. Do not start the car. Pull the window button to the first position (the first click on the button) until the window completely closes. Hold for 2-5 seconds until you hear a click. Check if the one-touch feature and the other problems are fixed.
This protocol requires a special USB converter, the 1747-UIC, which you can order from A-B or find a number of 3rd party versions online. In addition, you will need the female-to-female null modem crossover DB9 serial cable or a straight-through RJ45 ethernet cable, depending on which port you want to connect to.