Where can I get a fuel pump replacement?
You can get the OEM fuel pump part number from parts.subaru.com but Denso have different part numbers for replacement pumps see this link around page 64 however I’ve not found retailers with these. Then there’s Walbro and other after market brands.
Where are the snap in pieces in a fuel filter?
I initially placed them in the spaces in the filter that receive the snap-in pieces at the bottom of the two black hoses but found it much easier to roll them on the ‘male’ end of the snap-in pieces and send it all down the hole at once.
What happens when you replace the fuel filter?
With everything buttoned up and various test drives the knock, logged as FLKC in RomRaider has lessened so the computer is not reducing as much ignition timing. Most importantly the car feels more confident to drive, much more so than when only replacing the fuel filter. Click to expand…
How to replace a fuel pump and filter?
Doing so may cause damage to the pump. In-tank fuel pumps are designed to operate submerged in gasoline for lubrication and cooling. Assembling the Fuel Pump Assy With a New Pump and Filter (FIG 13, 14 and some references to previous FIGs). Completing the Fuel Pump and Filter Replacement. 1. Remove the back seat cushion:
What causes low fuel pressure after replacing filter?
The filter is clogged or dirty, resulting in low fuel pressure. The pump was replaced or removed for some other reason after some time of operation, especially if the fuel pump assembly was been turned upside down or shaken during the process of removal.
How to replace fuel filter on Nissan Patrol St-Fixya?
Re: how to replace a fuel filter on a nissan patrol st… Not sure what year model it changed over but it either unscrews from the filter housing (and the water sensor in the bottom of it),or you undo a cover and it is in a canister You can’t post conmments that contain an email address.
How do you unplug a fuel pump?
IMPORTANT: Cover the fuel tank opening to prevent dust and other foreign matter from falling into the fuel tank. 11. Unplug the fuel pump and the lever sender connectors (FIG 5). Each connector has a standard snap-on latch. Just press the latch and pull out the connectors.