Where are the fuel lines on my car?

Where are the fuel lines on my car?

One is on the left side of the engine by the glowplug controller, and the other to the drivers side of the transmission. Using a dremel with a small cutting wheel I cut the permanent crimps off of the rubber braided lines. I started from the rubber side working my way towards the metal tubing.

Where can I get a new fuel line hose?

Dealers may be able to find a local supplier for this hose, or can contact the manufacturer Parker Hannifin. The replacement hose would be a 1/2″ diameter Parker part number 601-8 or H017-8. To find a local distributor the Parker website can be accessed.

What should I do if my fuel line has collapsed?

If a technician was to suspect the rubber portion of the fuel feed line collapsing or kinking, replacement of only the rubber line is acceptable. Carefully cut, split, and remove the OEM crimp from both ends of the flexible hose. These crimps can be cut with a small cut-off wheel.

What causes a fuel line to kink or collapse?

A dealer may need to perform a repair on the rubber portion of the fuel supply (suction) lines. The rubber section of the line could become kinked or collapse. Fuel lines that kink or collapse may induce a fuel system restriction (high vacuum gauge readings) or DTCs P0087, P0093, and/or P1093 to set.

How many clamps are in a fuel line?

Your request has been sent successfully for processing. 70 3/8 Main – Fuel Line Clips, 4 Pcs. 64 – 67 3/8 Main, 1/4 Return – Fuel Line Clips, 9 Pcs. 3/8 Fuel Line Hose Kit; One 13; fuel Hose; One 6; Fuel Hose; 4 Green Clamps; 6 Pcs. 58 Chevy 283, 2 Bbl Thermal Choke Tube, 3 Pcs.

What kind of fuel line Kit do I Need?

3/8 Fuel Line Hose Kit; One 13; fuel Hose; One 6; Fuel Hose; 4 Green Clamps; 6 Pcs. 58 Chevy 283, 2 Bbl Thermal Choke Tube, 3 Pcs. 58 Chevy 283 4bbl Thermal Choke Tube; 3 Pcs. 57 V-8; 2×4 Carbs.

How many return fuel line clips are there?

Please provide the information below to receive our latest catalog. Your request has been sent successfully for processing. 70 3/8 Main – Fuel Line Clips, 4 Pcs. 64 – 67 3/8 Main, 1/4 Return – Fuel Line Clips, 9 Pcs.