Where are the fog lights on a Kia Sportage?
Fog lights are typically in the front bumper, below the headlight cluster and are helpful in poor visibility. If one fog light is burnt out on your Sportage, we recommend changing both bulbs because the working bulb will be dimmer than the one you replaced and will likely burn out soon anyway.
Why is my low beam headlight not working on my Dodge Ram?
After replacing the driver’s side headlight bulb twice on our 2006 Dodge Ram 2500 SLT 4WD Cummins Diesel pickup, the low beam still wasn’t working. I swapped the known good bulb from the other side and the low beam was still out, even though the high beam and fog lights were all functional.
Why does one of the headlights on my car not work?
One headlight doesn’t work. This is usually caused by a burned out bulb. High intensity discharge (HID) headlights can also fail due to other associated components. Neither of the headlights work. Bulbs usually don’t burn out together, but it’s still important to rule that out by checking for power.
Why is my car’s high beam light not working?
Make sure to use the right high beam bulb for your vehicle. On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all.
One headlight doesn’t work. This is usually caused by a burned out bulb. High intensity discharge (HID) headlights can also fail due to other associated components. Neither of the headlights work. Bulbs usually don’t burn out together, but it’s still important to rule that out by checking for power.
Why are my high intensity discharge ( HID ) headlights not working?
High intensity discharge (HID) headlights can also fail due to other associated components. Neither of the headlights work. The cause: Burned out bulbs, or an issue with power or ground. The fix: Check for power and ground, and fix if necessary. Otherwise, replace the bulbs.
What to do if your HID light bulb is not working?
The easiest way to verify that your HID headlight capsule is bad is to carefully remove both bulbs and replace the one that doesn’t work with the one that does. If the known-good bulb fails to turn on when placed in the other socket, then you’re dealing with a more complicated issue.
What to do when both head lights stop working at the same time?
When that happens, the operational lifespan of your headlight capsule will be severely compromised, and the only fix is to replace the headlight assembly. When both headlights stop working at the same time, the bulbs usually aren’t at fault.