Where are the brake lights on a Hyundai Elantra?
The most common location is the brake light switch . The good news is they are inexpensive and easy to replace. Your Elantra’s brake light switch is under the brake pedal. It ALWAYS should have power running to it, even if the key is off.
What is the neutral / start switch on a Hyundai Elantra?
The neutral/start switch is the device that lets you start the vehicle. To start the Elantra, you have to depress the brake pedal to engage the brake light switch. The switch allows you to turn the ignition key to the Start position so that the starting motor can engage and your car’s engine can crank.
Can a worn brake light switch cause problems?
Take the 2013 Hyundai Elantra, for example. According to the National Highway Traffic Safety Administration (NHTSA), worn brake light switches on 64,500 2013 Elantras can cause problems that range from: According to the agency, over time the brake pedal stopper pad can deteriorate.
How do you change the brake light switch?
Follow the pedal arm up until you see the switch. Remove the harness connector by pushing the center tab with the flat-head screwdriver, then pull the connector from the switch. Remove the locking nut from the brake light switch, and unscrew the switch. Screw the new switch into the brake pedal bracket and start the lock nut.
The most common location is the brake light switch . The good news is they are inexpensive and easy to replace. Your Elantra’s brake light switch is under the brake pedal. It ALWAYS should have power running to it, even if the key is off.
The neutral/start switch is the device that lets you start the vehicle. To start the Elantra, you have to depress the brake pedal to engage the brake light switch. The switch allows you to turn the ignition key to the Start position so that the starting motor can engage and your car’s engine can crank.
Take the 2013 Hyundai Elantra, for example. According to the National Highway Traffic Safety Administration (NHTSA), worn brake light switches on 64,500 2013 Elantras can cause problems that range from: According to the agency, over time the brake pedal stopper pad can deteriorate.
Follow the pedal arm up until you see the switch. Remove the harness connector by pushing the center tab with the flat-head screwdriver, then pull the connector from the switch. Remove the locking nut from the brake light switch, and unscrew the switch. Screw the new switch into the brake pedal bracket and start the lock nut.
What to do if your brake lights are not working?
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
Where is the brake warning light on my car?
In most vehicles this switch is located in the master cylinder. You’ll see a harness plug in somewhere around there. Some vehicles will now activate the brake warning light on the dash if the actual brake lights behind it go bad. Check to see that both of them are lighting up.
What should I do if my Hyundai Elantra is dragging?
Step 1. Block the front tires so the vehicle will not roll. Step 2. Raise the vehicle as if you were going to change the drivers side rear tire. Step 3. Rotate drivers side tire while the brake is in the released position. If you feel any drag or hear a rubbing noise, your emergency/parking brake may be dragging.
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
Why does my Hyundai Elantra not have a push pull gauge?
OWNERS SHOULD CHECK THEIR ON-LINE MANUAL FOR THE EXACT DETAILS. Why they do not have the tool, look at the ESSENTIAL SERVICE TOOL SURVEY FOR 2008 (on line) not a listing for a force push/pull gauge anywhere.
What are the problems with the Hyundai Elantra?
When being driven and slowing down for a stop light, car decelerates and stalls, goes to 0 mph. Brake lights malfunction. Left signal light malfunctions. See all problems of the 2014 Hyundai Elantra . Tl the contact owns a 2012 Hyundai Elantra.
How to fix the stop light indicator on a Hyundai?
Hyundai stop light indicator, brake light switch fix and replacment. – YouTube Hyundai stop light indicator, brake light switch fix and replacment. If playback doesn’t begin shortly, try restarting your device.
What is the VIN number on a Hyundai Elantra?
The brake warning light illuminated. The VIN was included in NHTSA campaign number: 20v061000 (service brakes, hydraulic). Neither the dealer or the manufacturer was made aware of the failure. The failure mileage was approximately 20,000. See all problems of the 2008 Hyundai Elantra .
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
What to do if your brake light doesn’t work?
Connect a jumper wire between the ground side of the socket and good chassis ground. With the light bulb in place, depress the brake pedal (or use a jumper wire at the brake light switch electrical connector). If the light bulb illuminates, repair the socket ground connection. If the light still doesn’t work,…
Where are the brake lights on my car?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.
Is there a recall on the 2013 Hyundai Elantra?
Hyundai dealers will replace the brake pedal stopper pad with an allegedly improved part. If you own a 2013 Elantra and have questions about the recall, call 855-371-9460 and ask for information about Hyundai’s recall number 146. Hyundai has had past problems related to brake light switches, but for different reasons.
Are there any recalls on the Hyundai Accent?
Then in September 2015, the Hyundai Accent was recalled to fix brake light switch problems. The defective switches were causing the brake lights to fail, the cruise control to stay activated when it wasn’t needed, problems with the push-button start feature and the switch caused the gear shifter to get stuck in PARK.
Why do the brake lights stay on all the time?
This will cause the brake lights to stay on continuously and the traction control warning light to stay lit. The switch can also cause the shift lever to move without depressing the brake pedal, meaning the car can be shifted out of PARK without pushing on the brake pedal.
In most vehicles this switch is located in the master cylinder. You’ll see a harness plug in somewhere around there. Some vehicles will now activate the brake warning light on the dash if the actual brake lights behind it go bad. Check to see that both of them are lighting up.