When to turn off the radiator fan on a Honda Accord?
Honda Accord Radiator Fan Motor Basics. The radiator fan is activated only when the radiator fan switch reaches a temperature above 199°F (93°C). Once the coolant temperature decreases below 199°F (93°C), the radiator fan motor turns off.
Where is the cooling switch on a Honda Accord?
The cooling fan switch in your Accord is located on the thermostat housing (see Figure 2 and 4). It controls both fans only when the key is in the “ON” position, but the engine is not running. Check if the cooling fan switch is working properly, and that there is no sign of wear or faultiness.
Is it normal for a Honda Accord cooling system to keep running?
This article applies to the Honda Accord (1990-2002). It’s perfectly normal to have your cooling system fan stay on after you’ve shut off the car, but it shouldn’t stay on longer than ten minutes.
What kind of fan does a 1996 Honda Accord DX have?
Cooling and condenser fan in a 1996 Honda Accord DX. Step 1 – What’s the condition of the temperature sensor? Your car has two temperature sensors: the ECT sensor and the ambient air temperature sensor.
What should I do if my Honda Accord fan is not working?
Check if the cooling fan switch is working properly, and that there is no sign of wear or faultiness. If the cooling fan switch is not working, it is easy to replace yourself. A new one will cost you around $30. Figure 4. Diagram of Honda Accord cooling system with the location of the thermostat housing.
The cooling fan switch in your Accord is located on the thermostat housing (see Figure 2 and 4). It controls both fans only when the key is in the “ON” position, but the engine is not running. Check if the cooling fan switch is working properly, and that there is no sign of wear or faultiness.
This article applies to the Honda Accord (1990-2002). It’s perfectly normal to have your cooling system fan stay on after you’ve shut off the car, but it shouldn’t stay on longer than ten minutes.
Cooling and condenser fan in a 1996 Honda Accord DX. Step 1 – What’s the condition of the temperature sensor? Your car has two temperature sensors: the ECT sensor and the ambient air temperature sensor.
How to test the radiator fan relay Honda 2.2L?
Since in this tutorial we’re only troubleshooting the fan relay and its circuits, you’ll find the radiator fan motor test here: How To Test The Radiator Fan Motor (Honda 2.2L, 2.3L). Symptoms Of A Bad Radiator Fan Relay.
Why is my motor fan not working on my Honda Civic?
Check this question Why does my motor fan not work? and check on the image that is attached to it. You see the switch in the thermostat housing. You can briefly check if that is the issue. by removing the plug from the switch. Take a paperclip and insert one end of the paperclip in each one of the contacts.
Can a jumper wire bypass the radiator fan switch?
TEST 1: Applying Power And Ground To The Radiator Fan Motor. Bypassing the radiator fan switch . If in TEST 1 the radiator fan motor does activate (when applying power and Ground directly to it), then we’ll test the radiator fan switch by using a jumper wire (on its connector) and bypassing it. TEST 2: Bypassing The Radiator Fan Motor Switch.
When does the radiator fan switch turn on?
The radiator fan switch closes above 199°F (93°C). This means that the radiator fan switch turns on the radiator fan relay… which in turns activates the radiator fan motor. If your vehicle is A/C equipped.