When to replace timing belt on VW Passat?
Replacement every 115,000 miles. Replacement every 120,000 miles. NOTE: Volkswagen UK recommend the timing belt is replaced every 4 years if the replacement mileage is not reached. The previous use and service history of the vehicle must always be taken into account.
How many miles is the timing belt on a VW Golf?
Well; for starters there is a definite change interval for the timing belt, and it is 130,000 miles for your car. There isn’t any flexibility in that as far as the VW service schedule goes. That said, however; I am at 160,000 miles on my timing belt on a 2012 Golf TDI…
How often should I replace my timing belt?
Volkswagen recommend: Golf Plus/Passat/Scirocco/Eos/Touran: Replacement every 120,000 miles. Golf: →2007: Replacement every 115,000 miles. 2008: Replacement every 120,000 miles. NOTE: Volkswagen UK recommend the timing belt is replaced every 4 years if the replacement mileage is not reached.
When to change timing belt on Audi A3?
It is also interesting to note that the 2.0T service maintenance schedule calls for a timing belt and tensioner inspection at 60,000, 80,000, and 100,00 miles. The inspection is done by visually inspecting the timing belt and physically spinning and testing the tensioners and idlers bearings for excess play.
How to replace timing chain on VW Passat 3C 3Si R36?
Camshaft locking tool – No.T10068A. Crankshaft pulley holding tool – No.T10172. Crankshaft pulley holding tool adapter – No.T10172/2. High-pressure fuel pump sprocket locking tool – No.T10363. Disconnect battery earth lead. Remove spark plugs to ease turning engine. Turn engine in normal direction of rotation (unless otherwise stated).
How to prevent camshaft rotation on a Passat 3C?
If not: Repeat timing chain installation. Camshaft rotation can be prevented using 27 mm spanner on hexagon. Tighten bolt of each camshaft sprocket to 60 Nm + 90° [18] . NOTE: DO NOT use camshaft locking tool to prevent camshaft rotation [4] .