When to check check engine light on Saab 9-3?
Steady Check Engine Light: If your check engine light is on every time you operate your 9-3, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.
Are there any problems with the Saab 9-3?
SAAB 9-3 owners have reported 26 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of SAAB 9-3 based on all problems reported for the 9-3.
Where is the fault code stored on a Saab?
Since a fault code will be stored in your Saab’s OBD computer, you can use an OBD-II scanner to read those codes. When your Saab check engine light comes on, you may notice:
What causes MAF sensor to go bad in Saab?
MAF sensor may function fine when the engine is cold then start to malfunction once the engine warms up. A coolant temperature sensor can go bad with time, causing the engine to run rich and preventing it from going into the ‘closed-loop’ mode.
Steady Check Engine Light: If your check engine light is on every time you operate your 9-3, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.
SAAB 9-3 owners have reported 26 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of SAAB 9-3 based on all problems reported for the 9-3.
Since a fault code will be stored in your Saab’s OBD computer, you can use an OBD-II scanner to read those codes. When your Saab check engine light comes on, you may notice:
MAF sensor may function fine when the engine is cold then start to malfunction once the engine warms up. A coolant temperature sensor can go bad with time, causing the engine to run rich and preventing it from going into the ‘closed-loop’ mode.
Where are spark plugs located on a Saab 9-3?
The non-turbo models use a distributor, and leads to each spark plug, while the turbocharged engines utilise Saab’s Trionic engine management system with a Direct Ignition Module (or cassette) mounted at the top of the engine, directly connecting to the spark plugs.
When did the Saab 9-3 anniversary convertible come out?
Saab 9-3 Anniversary convertible (Australia) The first generation 9-3, an updated Saab 900 (NG) was launched in 1998 for the 1999 model year. It was known to enthusiasts as the OG 9-3 (old generation) and internally as body style 9400. It continued as a full line through the 2002 model year.
The non-turbo models use a distributor, and leads to each spark plug, while the turbocharged engines utilise Saab’s Trionic engine management system with a Direct Ignition Module (or cassette) mounted at the top of the engine, directly connecting to the spark plugs.
Saab 9-3 Anniversary convertible (Australia) The first generation 9-3, an updated Saab 900 (NG) was launched in 1998 for the 1999 model year. It was known to enthusiasts as the OG 9-3 (old generation) and internally as body style 9400. It continued as a full line through the 2002 model year.
Why is the EML light off on my Saab 9-3?
Code reader arrived today. Plugged in it and got code P0400. Looked it up in the book provided, and got “EGR Flow Malfuntion” (surprise, surprise!). So just cleared the code and the EML light off, and went I for a spin. Thought it just needed to be cleared, great. Started the car again and EML back on.
How much does it cost to rebuild a Saab 9 3?
Had a compression test following several check engine lights and multiple readings diagnose a p0300 engine code . Cold and warm compression test showed cylinder 2 compression well out of specification. Documents available upon request. Quoted $4000 for engine rebuild. See all problems of the 2008 SAAB 9-3 .
How does the brake light work on a Saab?
When a Saab dies, the world becomes a little less quirky. The ! light in triangle, Central Warning Lamp (not the gearbox one) and brake (fluid) light will be turned on when the ABS lamp is lit. The ABS – and TC/ABS modules are powered by the #2 Maxi Fuse, 50 A, in the engine bay main fuse board, to be checked.
Had a compression test following several check engine lights and multiple readings diagnose a p0300 engine code . Cold and warm compression test showed cylinder 2 compression well out of specification. Documents available upon request. Quoted $4000 for engine rebuild. See all problems of the 2008 SAAB 9-3 .
Why does the Check Engine light come on on my Saab 9-3?
Comes on for a while and then goes off. Cannot link it to any vehicle activity. The contact owns a 2003 SAAB 9-3. The contact stated that the vehicle jerked when the brake pedal was depressed and stalled. The check engine warning light illuminated. The vehicle was able to restart.
What should I expect when I visit my Saab mechanic?
If you also notice on your dash, in addition to the activated check engine light, that you have low oil pressure or your Saab is overheating, you should safely pull off the road as soon as you can and shut off the engine. What Should I Expect When I Visit my Saab Mechanic for Diagnosis?
Why does my Saab check engine light keep coming on?
When your Saab check engine light stays on, it means that the On-Board Diagnostic (OBD) computer has detected a malfunction. The cause could be an engine problem, a fuel system leak, or even an indication of a transmission issue. Since a fault code will be stored in your Saab’s OBD computer, you can use an OBD-II scanner to read those codes.
What kind of engine light does Saab 9-3 have?
Engine Light Is On: 2003-2007 Saab 9-3 – What to Do – 2004 Saab 9-3 Arc 2.0L 4 Cyl. Turbo Convertible (2 Door) This free video provides the steps to diagnose and clear a check engine light on a 2004 Saab 9-3 Arc 2.0L 4 Cyl. Turbo Convertible (2 Door). The video also provides steps on how to read the 2004 Saab 9-3 Arc 2.0L 4 Cyl.
How to send Saab 9-3 engine ECU repair?
Print the payment/booking confirmation email. Package the Saab 9-3 engine ECU inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box). Send us your package by tracked courier (the shipping instructions are on the confirmation email).
Where is the oil leak on a 9-3 Saab?
On the Saab 9-3 and 9-5 vehicles, a common item to leak oil is the engine oil pressure sensor. Located behind the engine starter motor, we’ve seen this leak time and time again.
What does the VIN number on a Saab 9-3 mean?
Saab 9-3 VIN decoder. Every Saab car has a unique identifier code called a VIN. This number contains vital information about the car, such as its manufacturer, year of production, the plant it was produced in, type of engine, model and more.
Where is the right tire pressure on a Saab 9-3?
The right tire pressure is NOT on the side of your tire btw 2008 Saab 9-3 2.0T 2.0L 4 Cyl. Turbo Wagon (4 Door) Quick fix for minor power steering fluid leaks
What to do if your engine light is on on a Saab 9-3?
This free video provides the steps to diagnose and clear a check engine light on a 2004 Saab 9-3 Arc 2.0L 4 Cyl. Turbo Convertible (2 Door). The video also provides steps on how to read the 2004 Saab 9-3 Arc 2.0L 4 Cyl. Turbo Convertible (2 Door) trouble code About Us Maintenance Parts & Tools Contact English SpanishFrench Search
The right tire pressure is NOT on the side of your tire btw 2008 Saab 9-3 2.0T 2.0L 4 Cyl. Turbo Wagon (4 Door) Quick fix for minor power steering fluid leaks
What does the engine management warning light mean?
The engine management warning light is different from the other lights on your dashboard, as it doesn’t alert you to a specific fault. Unlike the coolant temperature warning or low oil level warning lights, the engine management light (EML) can be triggered for a number of reasons.
Why is my Check Engine light not working?
If the seller was worried that the car wouldn’t pass an emissions test, thus causing you to not want to buy it from them, they may have disable the ECM and prevented the vehicle from storing Check Engine Light Codes. Situations like this are rare – but it has happened.
What does the p1260 diagnostic trouble code mean?
P1260 Meaning. The P1260 code can be set if the Passive Anti-Theft System (PATS) has determined a theft condition existed and the engine is disabled or an engine start was attempted using a non-PATS key. This Diagnostic Trouble Code (DTC) is a good indicator to check the PATS for DTCs.
What kind of platform does the Saab 9-3 have?
The 9-3 was first based on the GM2900 platform and subsequently changed to the GM Epsilon platform. Other vehicles using this platform included the Opel Vectra and Cadillac BLS. Saab’s last owners, National Electric Vehicle Sweden (NEVS) were assembling the 9-3 sedan (saloon) as Saab’s only model.
How does the speed sensor work on a Saab?
What does this mean? The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear.
Why does my Saab check engine light keep blinking?
Saab turbocharged engines can have problems with fuel injectors. This will cause excessive smoke from the exhaust on startup and sometimes while driving, combined with rough running and hesitation. The root cause for this is a dirty fuel, which causes build-up on the injectors and poor spray pattern.