When did the Mazda 626 come out in the US?
For the first time for a Mazda, the 626 began manufacturing in the US at Flat Rock, Michigan on 1 September 1992 for the 1993 model year. The car was originally known as the “626 Cronos” in Canada, but dropped the Cronos for the 1996 model year. Mazda’s 2.5-liter V6 engine debuted to rave reviews.
How much horsepower does a Mazda 626 GLX have?
The Mazda 626 GLX is a European and Asian only trim level of the Mazda 626 not produced or sold in North America. It is Japanese-made, with a 2.0-liter four-cylinder DOHC-engine and a four-speed automatic transmission, which produces 125 hp (93 kW) at 6,000 rpm and 133 lb·ft (180 N·m) at 4,000 rpm.
What kind of engine does a Mazda 616 have?
This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States. An optional Mazda Wankel engine was offered and known as the Capella Rotary in Japan or the Mazda RX-2 for export.
When did the Mazda 616 get double headlamps?
From 1972 all models received the double headlamps. The taillight design was changed repeatedly over the production run. This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States.
What was the original name of the Mazda Capella?
Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626. Ford, Mazda’s partner at the time, would also use the Capella platform to create the Ford Telstar and Ford Probe.
For the first time for a Mazda, the 626 began manufacturing in the US at Flat Rock, Michigan on 1 September 1992 for the 1993 model year. The car was originally known as the “626 Cronos” in Canada, but dropped the Cronos for the 1996 model year. Mazda’s 2.5-liter V6 engine debuted to rave reviews.
Why does my Mazda 626 idle so rough?
The problem began about a month and a half ago when it started getting colder, I live in the East coast. In the mornings, when I initially turn on the car to warm it up, it doesn’t feel as bad. Once the car is warmed up though it begins to idle and feel very rough.
The Mazda 626 GLX is a European and Asian only trim level of the Mazda 626 not produced or sold in North America. It is Japanese-made, with a 2.0-liter four-cylinder DOHC-engine and a four-speed automatic transmission, which produces 125 hp (93 kW) at 6,000 rpm and 133 lb·ft (180 N·m) at 4,000 rpm.
What to do if your Mazda 626 has a leak?
Check all the vacuum lines, and make sure they are in good shape and connected properly. Check the PCV hose and lines also. In addition, check the large air intake hose from the Air Flow Meter to the intake manifold for cracks and leaks. They often crack in the valleys and are hard to spot.
This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States. An optional Mazda Wankel engine was offered and known as the Capella Rotary in Japan or the Mazda RX-2 for export.
From 1972 all models received the double headlamps. The taillight design was changed repeatedly over the production run. This generation was sold in export markets as the Mazda 616 in sedan and, for some markets, coupé configurations. There was also a Mazda 618 briefly sold in the United States.
Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626. Ford, Mazda’s partner at the time, would also use the Capella platform to create the Ford Telstar and Ford Probe.
Is the Mazda 626 made in the US?
Sales of the 626 dropped by 18 percent during 2000. Ford owns a controlling interest in Mazda, and the 626 is built at a plant near Detroit that the two companies share. Designed in Japan, the sedan uses Mazda engines, and its front-drive platform also serves as the basis for the compact Mazda Tribute and Ford Escape sport utility vehicles.
When did the Mazda 626 replace the Ford Telstar?
It was based on the Japan -market Mazda Capella. The 626 replaced the 616/618 and RX-2 in 1979 and was sold through 2002, when the new Mazda6 took over as Mazda’s large family car. 4,345,279 of the 626 and Ford Telstar models were sold worldwide.
What kind of car is the Ford 626?
The 626 was also sold as the Ford Telstar in Asia, Australasia and Southern Africa, but this has been replaced by the European -sourced Ford Mondeo. While in Europe it was always considered a large family car, in North America the first two generations of the 626 were compact cars, and the third, fourth and fifth were mid-size cars .
What are the specs of a 2002 Mazda 626?
The 626 is 69.3 inches wide and 55.1 inches tall. Seating five occupants, the 626 has front buckets and a three-place rear bench with a split, folding rear seatback. Cloth upholstery goes into the base LX sedan, but leather is standard in the upscale ES. Standard equipment includes air conditioning, remote keyless entry and a CD player.
Is there a Mazda 6 engine code finder?
If there is a match with other car makes and car models, these will also be shown in the overview. Please note that the information provided does not guarantee 100% accuracy and compatibility. The engine code finder is meant to help you find your own engine code based on the examples given by us, and is strictly informative. Mazda 6. Mazda 6.
Can you get a Mazda full circle inspection for free?
Every time you visit the service department of a Mazda Full Circle Service dealership your car gets a Mazda Full Circle Service Inspection, free. You’ll also get an easy-to-read report card that details anything on your car in need of attention or that may need attention in the future.
What to do when your Mazda 626 wont start?
This usually needed only in cases when the car has been off for 8 or more hours. It is the check valve inside the fuel pump. Just turn on and do not crank it for a few (6-8) seconds, then crank it, by that time the pump will have filled the line and it will start like magic! Justfixit, you may want totry what pscantlin did in response no. 14.
When did the Mazda Capella come out in the US?
The Mazda Capella, also known as the 626 In North America, is a mid-size car that was manufactured by Mazda from 1970 to 2002. Sold in the Japanese domestic market under the Capella name, the vehicle was also commonly known in other major markets as the Mazda 626.
Where was the Mazda RX-2 made in New Zealand?
The RX-2 was assembled under contract in New Zealand from 1972 for Mazda New Zealand by Motor Industries International in Otahuhu, South Auckland. It was the first and only rotary-engined car ever to be assembled in the country and was made as both a sedan, with manual or automatic transmission and a manual-only coupé.