What was the problem with my Yamaha R1?
2inch penis. my problem was actually the ECU failing. a capacitor on the board blew and took out some of the ECU’s functions. i tore that bike apart and tested every circuit possible and finally decided the cause had to be a faulty ECU to begin with. replaced the ECU with a new one and the bike has been running fine for a year and going.
How to check the fault code on a Yamaha?
To enter the diagnostic mode and check the existing error codes in memory, do the following: 1. Turn off the ignition, the engine stop button to put in the ON position. 2. Disconnect the fuel pump connector. 3. Simultaneously press SELECT + RESET on the dashboard and not let go. 4.
What’s the difference between Hi and ER-1 on a Yamaha R1?
2inch penis. anyone get this ever? the temp shows “Hi” and it’s flashing, while i get an “Er-1” error code. just wondering if anyone else had this problem and if they figured out why.
What does 44 mean on a Yamaha R1?
44 – error of the values / data of the diagnostic / ignition system, – is diagnosed by the self-diagnosis line D: 60 – 00 indicates the normal state of the readings of the EEP-ROM; – 01 indicates a violation in the mixing 01 cylinder – 02 indicates a violation in the mixing 02 cylinder – 03 denotes a violation in the mixing 03 cylinder
What does ER-1 mean on a Yamaha R1?
Er-1 is a communication error from the ECU, in fact you shouldn’t be able to start the bike with that code :dunno I fix F-15’s, but R1’s eat me.
How to erase an error on a Yamaha R1?
To erase the error from the system’s memory, go to line d62 and turn on the stop engine button on the right remote control. When entering the diagnostic mode, the display shows cell [d01]. Pressing the Select (upper) button, you need to go to the indicator [d60] (real-time self-diagnosis) and [d61] (error memory) and see the number next to it.
How to check a Yamaha er-3 fault code?
Er-3 – it is impossible to consider the testimony from the ignition module; Login process in diagnostic mode: 1. Switch off ignition. Disable button Start / Stop Engine (red on the right panel). 2. Press both buttons on and keep them tidy. 3. Turn the ignition, hold the button after the ignition is about 8 seconds.
What do the error codes on a Yamaha motorcycle mean?
D: 60 = EEPROM, list of system errors (00 = no error, error code = 01-04 in the cylinders, if more than one memory errors, they are displayed alternately) D: 61 = list of errors on the ignition module sensors (00 = no errors in memory, 11-70 = error codes for the components if more than one memory errors, they are displayed alternately)