What type of oil does a Chrysler town and country take?
SAE 10W-30
The 4.0L Chrysler Town & Country engine should specifically use a Chrysler MS-6395 oil specification and an oil viscosity of SAE 10W-30. By using proper oil specifications as requested by Chrysler you will greatly improve your vehicles mechanical longevity and performance.
What kind of oil does a 2008 Chrysler?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) Vehicles with the 5.7L Multiple Displacement System (MDS) must use SAE 5W-20 oil. Failure to do so may result in improper operation of the MDS. |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a 2008 Chrysler Town and Country 3.8 take?
5 quarts
Capacity: 5 quarts. (with filter)After refill check oil level.
What kind of oil does a Chrysler van take?
Engine Oil
| Viscosity: | 5W-30, 5W-20 (All TEMPS) Check oil fill cap for proper engine oil viscosity usage. |
|---|---|
| Capacity: | 5 quarts (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What is the difference between SAE 5W-20 and SAE 5W 30?
When comparing 5w20 vs. 5w30 motor oil, the 20 indicates that the oil has a lower viscosity and is thinner at higher temperatures. So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures.
Does a town and country need synthetic oil?
Chrysler recommends getting your Chrysler Town and Country oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil commonly should be changed every 7,500 – 10,000 miles.
How much oil does a 2008 Chrysler Pacifica take?
5.5 quarts
Capacity: 5.5 quarts. (with filter)After refill check oil level.
What oil does Chrysler 300 use?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts. (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
What oil does a 3.8 L V6 take?
Engine Oil This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. Capacity: 5 quarts (with filter)After refill check oil level.
How many quarts does a 3.8 L V6 hold?
Capacity: 4.5 quarts (with filter)After refill check oil level.
What kind of oil does a 2007 Chrysler Town and Country take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
What happens if you put 5w30 instead of 5w20?
What Will Happen If You Put 5w30 Instead Of 5w20? Using 5W-30 instead of 5W-20, you risk damaging your car’s engine because the internal engine components work with 5W-20 motor oil. 5W-20 and 5W-30 motor oil both have the same winter rating. Higher viscosity numbers suggest a heavier oil that flows slower.