What tubes are used in a Fender Twin Reverb?
Fender Twin Reverb amplifiers use four output tubes, of the 6L6GC type. They use six preamp tubes, consisting of four 7025/12AX7 types and two 12AT7 types. All Twin Reverbs feature a solid-state rectifier.
Which tube is for reverb?
Fender Amp Preamp Tube Layout and recommendations
| Fender 2 channel reverb amp preamp tube layout (as seen from the back of the amp) | ||
|---|---|---|
| Tube Designation | V6 | V2 |
| 12AT7 | 7025/12AX7A | |
| Specified Function | Phase Inverter | First gain stage for channel 2 |
What tubes are in a Fender Deluxe Reverb?
Specifications. The Deluxe Reverb is a 22-watt tube amplifier (at 8 ohms), powered by a pair (“duet”) of 7408/6V6GT power tubes, one GZ34/5AR4 rectifier tube, four 7025/12AX7 tubes for preamplification and tremolo oscillation, and two 6201/12AT7 tubes driving the reverb and phase inverter circuits.
How much does a Fender Twin reverb weigh?
64 lbs.
Weight: 64 lbs.
What is the best pedal for a Fender Twin?
The Danelectro Cash Cow. The Danelectro Cashcow is an absolute beast!
What are speakers for Fender Twin?
The more common speakers found in Fender Twin Reverbs include Jensen C12Ns, Oxford 12T6s, JBL D-120Fs (an upgrade at the factory), Altec Lansing 417-8Cs, Utahs and, in later years, CTS and Eminence models. Some Twins were fitted with EVM 12L variant speakers known as EVM 12Fs .
What is a Fender evil twin?
“Red Knob” Twin. The Twin Reverb II was replaced by The Twin, commonly referred to, though incorrectly as, the “Evil Twin” (Fender has only referred to the “TWIN AMP” or the ’94 Twin Amp as being the “Evil Twin”, not the red knob Twin) due to the addition of both a separate gain channel and a switchable overdrive on the clean, in 1987.