What to do if your Honda Foreman does not have a spark?
The moral of the story, if you don’t have a spark, you may want to check the plug, or replace it first. That was the cheapest option, and it would have saved me the time of pulling the front cargo carrier and plastic off to get to the CDI.
What causes Honda Civic to have no spark?
You can find the ignition coil and ignition control module (igniter) test here: How To Test The Igniter, Ignition Coil Accord, Civic, CRV, and Odyssey. Check that the timing belt is not broken. A broken timing belt will cause a No Spark No Start Condition.
What to do if your Honda has no start?
The very first thing you need to do is check for spark and the presence of fuel. Both of these tests should be done simultaneously if possible. As mentioned before, usually one of them will be missing from the mix. Testing the ignition system on your Honda isn’t hard or difficult.
How to test the ignition system of a Honda Civic?
You can find a complete Ignition System diagnostic procedure here: How To Test The Igniter, Ignition Coil Accord, Civic, CRV, and Odyssey (at: easyautodiagnostics.com ). Test the ignition coil and ignition control module (igniter).
The moral of the story, if you don’t have a spark, you may want to check the plug, or replace it first. That was the cheapest option, and it would have saved me the time of pulling the front cargo carrier and plastic off to get to the CDI.
Why does my Honda FourTrax 300 have no spark?
I have been working on a 1990 fourtrax 300. I have no spark at all. I have checked all fuses, checked all of the connections, replaced the coil, checked the kill switch, replaced the CDI, and replaced the starter (not the problem but needed changed anyhow). The motor will crank but that’s it.
Why does my Honda Accord not get a spark?
There are three primary things that will keep the engine from getting a spark: A bad ignition coil, a bad igniter, and a bad distributor. To check the ignition coil, measure the resistance between the + terminal (black/yellow wire) and the – terminal (white/blue wire) of the coil.
What should ignition resistance be on Honda Accord?
To check the ignition coil, measure the resistance between the + terminal (black/yellow wire) and the – terminal (white/blue wire) of the coil. The resistance should be about 0.6 to 0.8 ohms at 70° F. Then check the resistance between the + terminal (black/yellow wire) and the coil wire terminal. It should be about 12,000 to 19,200 ohms at 70° F.