What to do if battery is not properly connected?
Here are the steps to eliminate this error message: Click “OK” to enter Hibernate mode, and remove and reinsert the battery. Follow these steps to fix this problem on Windows Vista. Power off the notebook and remove the battery. Make sure only the AC adapter is connected and power on the notebook.
How to fix laptop reporting incorrect battery capacity?
To reset the system disconnect the battery and adapter then press and hold the power button for 30 seconds. Then reconnect everything and see if the battery charges normally. Also the following from the Microsoft site might help. https://answers.microsoft.com/en-us/windows/forum/all/how-to-fix-the-wrong-estimate-time-on-battery-…
Why was my battery installed with the wrong polarity?
The wires were crossed. the positive terminal was connected to the negative wire and the negative terminal to the positive. Immediately removed it all and fixed it correctly. But of course I knew this will have repercussions.
Why is my battery on my Sony Vaio not working?
This error message is common with Sony Vaio laptops when a new laptop battery is installed. The Windows battery management software can sometimes conflict with the Sony battery management program. Sony Vaio battery packs have a great deal of programming inside the battery pack.
What to do if you hook up your car battery incorrectly?
In small claims court, just say, “They ADMITTED to hooking up my battery INCORRECTLY.” If you aren’t clear, and concise, in your claim, you might lose your claim. You need to go to the shop manager or store manager for resolution.
Why is my computer stalling after replacing the battery?
Severe cases of stalling after replacing the battery may require that your throttle body or your idle air control valve  be cleaned out. Over time, a large amount of carbon can build up inside these parts, pushing them beyond the limit that the computer can adapt to.
How to fix stalling after replacing car battery?
Step 3: Disconnect the old vehicle battery and remove it. Step 4: Insert the new vehicle battery, use a battery brush to clean the cable ends and battery posts, connect and tighten the cables, and make sure the battery is secured in place. Step 5: Disconnect the memory saver immediately, before starting the car.
How to recalibrate the battery in Windows 10?
How to recalibrate the battery in your Windows 10 laptop 1 Change your power plan. 2 Charge your battery. 3 Unplug your laptop and let it discharge. 4 Charge your battery again. 5 Reset your power plan. See More….