What size is the steering column?
The standard length is 3.25” and can be shortened to 1.5” upon request (a nominal custom charge will apply). Measure 3.25” (or custom length if applicable) from the bottom of the sleeve or shift hub and mark the dowel. Shortened cones may expose wiring.
How do I measure my steering spline?
To determine the spline size of a component (rack and pinion, steering column, and steering box), measure the outside diameter and count the number of splines. If there is a flat spot on the shaft and some of the splines are missing, count halfway around where there are splines and double that number.
What is the diameter of a steering wheel?
Steering Wheel Size (Diameter): The sizes that matter include the diameter and the grip circumference of the steering wheel. These diameters typically range between 14 and 17 inches, while the grip circumferences range between 2 3⁄4 and 4 1⁄4 inches.
How do you measure a steering column drop?
measures our column drops from the mounting surface, typically from the bottom of the dash to the center line of the steering column. If you have a fiberglass dash, measure from the mounting support to the center line of the steering column. All column drops need a secure mounting surface to bolt on to.
How is DD steering shaft measured?
For example: the 3/4-inch measurement on a double D shaft is measured across the rounded portion of the shaft. The fully machined double D shaft is available in several lengths and can easily be cut to an exact length for your steering system.
Is it illegal to have a racing steering wheel?
Removable or quick-release steering wheels are not legal and should only be seen on the racetrack. For vehicles manufactured after 1970, the steering wheel needs to be certified to ADR 10 standards. If your vehicle comes with an airbag as standard fitment then the new steering wheel should also have an airbag.
What are the parts of a steering wheel?
Wheel Anatomy 101: Structure Center Bore. Structurally, the empty space inside the center bore is one of the most important points on the wheel. Plate. Around the center bore there is generally a substantial piece of metal interrupted only by the bolt holes. Spokes. Dish. Bolt Circle. Valve Stem.
What is a telescopic steering column?
Telescopic steering is a device used in GM cars specifically. Cadillac is the primary employer of such a device. Between the wheel and the dash on the steering column is found a metal tab that is the adjusting collar. This collar is attached to a threaded insert that when loosened screws out away from a metal rod that actuates the locking device.
What is tilt steering column?
Tilt columns can only be used in earlier automatic column-shift or floor-shift cars by shortening and adapting the long sector shaft. This can be accomplished by incorporating a rag joint or flexible u-joint assembly on the shaft between the steering gearbox and the lower end of the steering column.
What is a steering column shaft?
The steering shaft is a two or more piece component located inside the steering column. It is supported at the top and the bottom of the steering column by bearings. The steering column housing may also contain gear shift components. In normal road cars, the steering column is used to mount several accessories.