What size is 16B chain?

What size is 16B chain?

1″ x 17.02 mm
16B Roller Chain dimensions – ISO R606

Chain No. DIN	P x W	Transverse Pitch C (mm)
16B-1	1″ x 17.02 mm	–
16B-2	1″ x 17.02 mm	31.88
16B-3	1″ x 17.02 mm	31.88

What is the difference between 60 and 60H roller chain?

ANSI #60H Heavy Roller Chain. It has a 3/4″ pitch (center of one pin to the center of the next) and thicker side plates than traditional 60 roller chain (0.125″ vs 0.094″). The result of this is a roller chain that can stand up to higher shock loads and have a longer wear life.

How do I choose a roller chain?

1. Selection Procedure.
2. Determine the Class of Load.
3. Lubricant.
4. Note : If table 1 does not list your equipment, go by its similarity to a listed item.
5. Establish the Design Horsepower.
6. Final Selection of Chain.
7. Select the Large Sprocket.
8. Determine Chain Length.

What is 16B roller chain?

16B roller chain is a metric chain size with a 1″ ptich (25.40mm) and commonly referred to as a British Standard chain. Every 10 foot roll of 16B chain includes 1 connecting link.

What is the difference between #40 and #41 roller chain?

#40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.

What chain size do I need?

If your bike is equipped with the derailleur, you need a 3/32″ or 11/128″ chain. If you have a single-speed or internally geared bike, you need either 1/8″ or 3/32″. You should get the correct size, but if it is not possible, you can get the 1/8″ because it has limited compatibility with the 3/32″ sprocket.

How do I choose a chain size?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

How do I choose a chain number?

Determine the number of teeth of the small sprocket. The number of teeth for the large sprocket is determined by multiplying the number of teeth for the small sprocket by the speed ratio. More than 15 teeth on the small sprocket is recommended. The number of teeth on the large sprocket should be less than 120.

What size is 12B chain?

12B Roller Chain dimensions – ISO R606

Chain No. DIN	P x W	Pitch P (mm)
12B-1	3/4 X 7/16″	19.05
12B-2	3/4 X 7/16″	19.05
12B-3	3/4 X 7/16″	19.05

What size is 10B chain?

5/8″
10B Roller chain made to ISO R606 is 5/8″ or 15.875 mm pitch it is available in single strand 10B-1 duplex 10B-2 and triplex 10B-3. It is possible to have the chain up to 6 strands wide.

What’s the pitch of a 16B roller chain?

This 16B British Standard roller chain is also known as 16B Metric Roller Chain, has a 1″ pitch, and fully meets all British Standard ISO Standards. What separates this 16B-1 chain from others on the market is the superior strength and performance offered by this chain versus others at the same or higher priced on the market.

Which is the ISO standard for roller chain?

It meets ISO 606B, which is an international standard for dimensions and materials. Connecting links are also known as master links. They’re used to join the ends of a chain length. The side plate is easy to remove for attaching to chain. Adding-and-connecting links are also known as half links and offset links.

Who are the largest suppliers of roller chain?

USA Roller Chain and Sprockets is one of the nation’s largest suppliers of roller chain and industrial PT components. Below is our Roller Chain Size Chart that shows a few of the different sizes we have, but our inventory is not limited to the roller chain size charts.

How big is a double strand roller chain?

Double Strand Roller Chain Size Chart Chain Size Pitch (P) Roller Width (W) Roller Diameter (D) Overall Width (A) #60-2 0.750″ 0.500″ 0.469″ 1.890″ #80-2 1.000″ 0.625″ 0.625″ 2.440″ #100-2 1.250″ 0.750″ 0.750″ 2.986″ #120-2 1.500″ 1.000″ 0.875″ 3.776″