What should the oil level be on a Softail dip stick?
See Engine Oil Dipstick. Remove the dipstick and verify the level of the oil. The correct oil level should register midway (2) between the FULL and ADD marks on the dipstick. If oil level is at or below the ADD mark, add only enough oil to bring the level to the middle of the two marks on the dipstick.
What should the oil pressure be on a Harley Davidson?
If you could shed any light on this matter I would greatly appreciate it. Those oil pressure numbers are typical for your m/c. If the motor rebuild is unknown, or questionable, we suggest inspecting your cam chain tensioners. If you are interested in looking into keeping your oil cooler; check out Love Jugs.
What should oil pressure be on a Twin Cam 88?
Once it is warmed up and under load it shows 20 psi. and it has gone to 5-10 psi and come back up again. At idle it shows 0 psi. Is this something I should be worried about or is it normal for a Twin Cam 88. If you could shed any light on this matter I would greatly appreciate it. Those oil pressure numbers are typical for your m/c.
How do you check oil level on a jiffy stand?
Remove filler plug/dipstick and wipe off the dipstick. Insert the dipstick and tighten into the fill spout. The oil level marks for checking with motorcycle upright or on jiffy stand are on the same side of the dipstick. Be sure to use the correct portion of dipstick when checking oil level. See Engine Oil Dipstick.
What should the tire pressure be on a Softail?
Use a high quality tire pressure gauge to get accurate readings for your tires. Tire size is really important on your Softail. The standard should be a 130 on the front and rear; however, many owners get a wider rear tire (140 to even a 150, or up to a 180).
See Engine Oil Dipstick. Remove the dipstick and verify the level of the oil. The correct oil level should register midway (2) between the FULL and ADD marks on the dipstick. If oil level is at or below the ADD mark, add only enough oil to bring the level to the middle of the two marks on the dipstick.
If you could shed any light on this matter I would greatly appreciate it. Those oil pressure numbers are typical for your m/c. If the motor rebuild is unknown, or questionable, we suggest inspecting your cam chain tensioners. If you are interested in looking into keeping your oil cooler; check out Love Jugs.
Once it is warmed up and under load it shows 20 psi. and it has gone to 5-10 psi and come back up again. At idle it shows 0 psi. Is this something I should be worried about or is it normal for a Twin Cam 88. If you could shed any light on this matter I would greatly appreciate it. Those oil pressure numbers are typical for your m/c.