What should I know before installing an automatic transmission?
DO NOT ASSUME THE ABOVE ITEMS ARE GOOD. CHECK EACH ONE THOROUGHLY. THE OPERATION AND DURABILITY OF A TRANSMISSION DEPENDS ON THE ABILITY AND EFFORT OF THE INSTALLER.��� THE DRIVER OF THE VEHICLE IS RESPONSIBLE FOR MAINTAINING PROPER FLUID LEVELS AND PREVENTING THE TRANSMISSION FROM OVERHEATING.
Can a 2001 transmission work on a 2002 car?
Also, because of the computerized control systems in modern transmissions, a transmission from a 2001 vehicle might not work properly in the 2002 model. Most repair shops will not install a used transmission because of these risks.
How much does it cost to repair a used transmission?
Most repair shops will not install a used transmission because of these risks. CostHelper readers report paying $288-$415 for do-it-yourself installation of a used transmission, with an average cost of $361; and a CostHelper reader in Pennsylvania bought a used transmission for $200 and paid a local transmission shop $500 to install it.
What’s the best way to replace a transmission?
Put a large drain pan under the transmission and torque converter. Pull the torque converter out of the transmission housing and allow the fluid to drain. Fill the torque converter with new transmission fluid. Push the torque converter inward while rotating it into the transmission to properly engage the trans input shaft.
What’s the best way to install an automatic transmission?
Step 3 Complete the transmission installation only when end-play is satisfactory. Apply Loctite to converter bolts or nuts, then tighten to 30 ft/lbs. Step 4 Elevate rear wheels 3″ off ground. Install four (4) quarts transmission fluid. Use a good grade of automatic transmission fluid.
Do you need to go anywhere else for a used car transmission?
There is no need to go anywhere else for your used car, truck, can or SUV transmission. We not only have a large inventory but we have access to used transmissions from all over, decreasing the time spent looking for that used vehicle motor.
How do you change the converter on a GM transmission?
Catch fluid in drain pan. Replace pan gasket. By removing converter dust cover, converter flywheel bolts are exposed. On Ford and Chrysler transmissions rotate convertor to locate drain plug. Remove and drain converter. Step 3 Remove converter from flywheel. Remove four (4) bolts on Chrysler, three (3) bolts on GM, and remove four (4) nuts on Ford.
Is there a warranty on an automatic transmission?
Access over 250,000 used automatic transmissions for most cars and trucks available in North America. All Our units come with a 1 year warranty and extended warranty options. All units are checked by professionals before shipping.