What should I do when my water filter is replaced?
Select Water on the dispenser selector and press the pad until water begins to flow. The first few ounces of water may sputter due to air in the replacement filter. This is normal. Continue to dispense approximately 1-2 gallons of water to make sure all air is purged from the system.
What’s the first step in installing a water meter?
You need to bee very carefully in this step becasue you need to consider the order placement. First i put the copper elbow with rope then weld the copper tube, the elbows and the coupling. Joint the water meter to the coupling using the union nut.
What’s the best way to replace a water heater?
Attach a garden hose to the drain valve and drain the water left in the tank. Caution: The water will be scalding hot! Disconnect the gas line at the nearby union with a pair of wrenches and unscrew the pipe from the gas control valve with a pipe wrench.
Do you have to be home when your water meter is replaced?
Older water meters are being replaced with upgraded ones. Water meters keep tabs on how much water residents of a home consume. When it fails to work properly, qualified maintenance workers from your local water district will come out and replace the water meter. Residents are generally not even required to be home at the time of replacement.
How do you replace a water well tank?
Turn on the breaker for the electrical circuit to the pump. Allow any air in the system to escape at the relief valve. Close the lever on the valve when water streams out. Allow the tank to fill until the pump shuts off before drawing water at a faucet or plumbing fixture.
What’s the best way to replace a water filter?
Grasp the filter and turn it to the left until it stops, while gently pulling downward from the filter head. Keep the filter level to minimize water spillage. (If the filter doesn’t come loose easily, air may be trapped inside.
How often do you have to replace your water meter?
Residents are generally not even required to be home at the time of replacement. Replacing a water meter is something you will only have to have done about every 18 years. Functioning problems begin to occur around this time, such as providing incorrect data readings.
Attach a garden hose to the drain valve and drain the water left in the tank. Caution: The water will be scalding hot! Disconnect the gas line at the nearby union with a pair of wrenches and unscrew the pipe from the gas control valve with a pipe wrench.