What should I do if I have a question about Dynatek?
If you have a question regarding your Dynatek ignition systems or any other product, we recommend you first download the appropriate installation guide and review the contents. The vast majority of your questions or concerns should be addressed in the installation and trouble shooting guides.
How to install electronic ignition on a Dyna s?
· 6. Install the advance/rotor assembly on the engine making sure the pin on the advance assembly is engaged in the slot on the engine. Install the bolt and tighten. Ensure that the rotor is still free to rotate. 7. Remove the wire that connected the points and ignition coil. 8.
How to contact support for the Dyna 2000?
The vast majority of your questions or concerns should be addressed in the installation and trouble shooting guides. If you should require assistance, please contact out Technical Support Staff at 800-928-3962 EXT 1 or e-mail to [email protected]. Will my stock pickup work in single fire mode with the Dyna 2000? How?
Where do I put the Dyna 2000I in the engine?
Place the DYNA 2000I in the engine with the timing pickup (near the switches) at the mark made in step 1. Install the two screws that held the stock cam position sensor, finger tight. 3. Coil connection. Typically, there is a white wire from the Run/Stop switch on one of the coil primary terminals.
Where can I find the instructions for Dynatrac?
You can find the instructions for Dynatrac™ products on this page. They are available in downloadable PDF format for ProGrip™ brake upgrade kits, Dynaloc™ hub kits, Endurosport™ suspension systems, Dynatrac Free-Spin™ kits, and Dynatrac HD Rebuildable BallJoints™.
If you have a question regarding your Dynatek ignition systems or any other product, we recommend you first download the appropriate installation guide and review the contents. The vast majority of your questions or concerns should be addressed in the installation and trouble shooting guides.
The vast majority of your questions or concerns should be addressed in the installation and trouble shooting guides. If you should require assistance, please contact out Technical Support Staff at 800-928-3962 EXT 1 or e-mail to [email protected]. Will my stock pickup work in single fire mode with the Dyna 2000? How?
Do you need Voes for a Dynatek ignition system?
Do not use solid core or spiral core type plug wires. The factory Harley wires should work fine. Dynatek does not recommend the use of Nology wires with our microprocessor controlled ignition systems. Should I use the VOES on my late model Harley with the Dyna 2000?