What oil does a Virago 250 take?
What you need to service the V Star 250. The manual suggests Yamalube 10W-40 or Yamalube 10W-50 (if you ride in heat over 100F/40C). You need 1.4L without changing the oil filter, or 1.6L with changing it, so one gallon/4L should be good for two changes. Tighten the oil drain bolt to 34 Nm (25 ft-lb).
How much oil does a 1982 Yamaha Virago take?
Virago Specifications
| Engine oil | |
|---|---|
| XV-920 (1981-1982 CHAIN DRIVE) | 8.9 oz (264 cc) |
| XV-920 (1981-1982 SHAFTDRIVE) | 10.2 oz (303 cc) |
| XV-1000, XV-1100 | 12.6 oz (372 cc) |
| Final Gear Oil (SHAFT DRIVE) | .21 qts (200 cc) |
How much oil does a Yamaha Virago XV250 take?
The bike is meant to take 1.4L (0.36 gallons) but you might overfill the bike to 2L (0.52 gallons) if you don’t let the oil settle properly when checking the gauge. Recycle the old oil. Pour the old oil into another container.
How much oil does a Yamaha 250cc motorcycle use?
by Doug Bennett. The Yamaha 250cc engine is a popular choice for sport and recreational motorcycle riders. While the specifications differ slightly from model to model, Yamaha 250cc engines generally use between 1.3 and 1.4 liters of oil.
How big is the engine in a virago?
Virago Specifications Engine oil With Filter Change 3.3 qts (3,100 cc) Without Filter Change 3.2 qts (3,000 cc) Engine Rebuild 3.8 qts (3,600 cc) Front Forks
Where is the oil bung on a virago XV250?
The bung is located on the left hand side of the bike behind the stand and is covered by the stand when it’s up. Use a spanner to unscrew it anti-clockwise and screw it clockwise to tighten it back up. It’s a lot easier to drain when the oil is warm, so warm up the bike with a bit of a drive after letting it idle for a while.