What makes a clutched alternator pulley a clutched pulley?
Clutched pulleys will have a cap while un-clutched pulleys typically will not. On the alternator above the end of the pulley is covered by a black cap, thus it is a clutched-type pulley. Outside of the possibility that the cap was removed and not replaced, this is a pretty reliable way to tell.
How to remove a primary sprocket on a Harley Davidson?
1 Preperation. Bob begins by draining the primary drive oil and removing the outer primary cover. 2 Removal. Retract the primary chain adjuster shoe and retain it with a long tie wrap, or two smaller tie wraps. 3 Clean. The next important step is cleaning the sprocket shaft threads. You can use a 9/16-12 thread chaser or tap.
How do you replace the alternator pulley on a VW?
Replacing the alternator pulley involves counter-holding the alternator shaft while loosening the pulley securing hut. This typically requires a special alternator pulley bit set which can vary between models. This Metalnerd Alternator Pulley Bit Set will cover all VW & Audi TDI models.
Is the small clutch adjustment cover round or round?
On the 1991-1993 cover, the primary chain inspection cover is also round, but is mounted with two screws. Likewise, the small clutch adjustment cover is round and mounted by two screws. On the 1994-2003 cover, the primary chain inspection cover is still round using two screws to mount it.
Do you have to remove clutch for alternator replacement?
The manual states that for Harley alternator replacement it is necessary first remove both, the primary chain sprocket and the clutch as a component but I´ve been told you change the alternator by only removing the primary chain sprocket and not the clutch. Is it really mandatory to remove both components and why?
Do you need to change the alternator on a Harley Davidson?
My questions is regarding the alternator. The manual states that for Harley alternator replacement it is necessary first remove both, the primary chain sprocket and the clutch as a component but I´ve been told you change the alternator by only removing the primary chain sprocket and not the clutch.
Do you need to replace the clutch on a Harley?
Ricardo, you do not need to remove your clutch assembly to replace your charging system. Removing your compensating sprocket assembly and the lock nut from your primary chain adjuster, will allow you enough room to replace your stater and rotor. Good question.
What kind of alternator does a road King have?
I´m from Mexico City and proudly own a 1995 HD Road King. My questions is regarding the alternator.