What kind of oil does a Honda 4-stroke Weed Eater take?
Honda recommends using 10W30 oil that meets API service category SJ or later.
How do you take the head off a Honda weed eater?
Pull the trimmer line spool out of the trimmer head. Observe your trimmer head to see if it has a small hole in the inner and outer portions. If so, insert a small Phillips screwdriver into the two holes to hold it in position, remove the center nut with an adjustable wrench and pull the head off.
What is SAE30 oil?
SAE 30 oil is a motor oil that has been given a viscosity rating of 30 by the Society of Automotive Engineers, according to AA1Car Automotive Diagnostic Help Center. Motor oils typically have ratings from 0 to 50.
How much oil does a Honda GX25 take?
Features
| GX25 | GX35 | |
|---|---|---|
| Oil Capacity | 2.7 US oz (80cc) | 3.4 US oz (100cc) |
| Fuel | Unleaded 86 octane or higher | Unleaded 86 octane or higher |
| Fuel Tank Capacity | .61 U.S. qt (0.58 liter) | 0.67 U.S. qt (.63 liter) |
| Dry Weight | 6.8 lb (2.7 kg) | 7.6 lb (3.3 kg) |
How do you service a brushcutter?
Maintaining the brushcutter engine
- Clean the air filter: simply disassemble it and tap it lightly against a hard surface after every 8-10 hours of mowing.
- Extract the fuel filter from the tank once a month and change it if damaged.
- Clean the engine cylinder fins once a month using a brush or compressed air.
How much oil goes in a Honda hrx217?
Honda’s HRX series of push mowers, including models HRX217HXA, HRX217HMA and HRX217TDA, are equipped with Honda’s GCV190 engine. This 6.5-horsepower engine holds 0.58 quarts of oil (18.6 ounces) and does not have an oil filter.
Who makes hyper tough weed eaters?
ALM Manufacturing
ALM Manufacturing – Hyper Tough grass trimmers.