What kind of fuel pump does Mitsubishi Eclipse have?
You have both a fuel pump relay and a module in this vehicle to be concerned with… the relay powers the module, and the module passing current and ground to the pump.
Where is the relay module on a Mitsubishi Eclipse?
The relay module is located on exactly the opposite location, in the driver side of the console, again below the radio area mounted behind the carpet. My concern at this point would not be so much about the fuel pump not coming on, but that you are not getting injector pulse either.
What happens when the crank sensor goes out on a Mitsubishi Eclipse?
If the crank sensor goes out, you will have no spark, no fuel, and no injector pulse. Similarly if key power lines are down to the PCM (via fuse or MFI relay failure), there will be no reference voltages, and therefor no spark, no injector fire
When did the Mitsubishi Eclipse Engine come out?
The Mitsubishi Eclipse began production in 1989 and produced models for the open market between 1990 and 2012. Here is what you should know about an affordable Mitsubishi Eclipse engine for sale on eBay.
Which is the best down pipe for a Mitsubishi Eclipse?
Featured brands include Megan Racing, Tanabe, Godspeed Project, Magnaflow, Invidia, Injen and more. For turbocharged models the down pipe is a must have modification for any Eclipse. These Mitsubishi Eclipse down pipes offer straight through design for optimal performance.
Is there a 4G version of the Mitsubishi Eclipse?
The 4G Eclipse was under appreciated by many but still the aftermarket has grown and now many styling and bolt on performance and suspension products are available. Weather you have a First Gen Eclipse, Second Gen Eclipse, Third Gen Eclipse or Fourth Gen Eclipse you can be sure that we have you covered with a slew of aftermarket upgrade options.
What can I add to my Mitsubishi Eclipse?
One of the most commonly customized parts for Mitsubishi Eclipse is adding an aftermarket front bumper lip. These front bumper lips install onto the stock bumper and accentuate the factory body lines while adding an aggressive new look and lower ground clearance which gives a much sportier appearance.
Why is my fuel pump not getting power?
The fuel pump will only power up if RPM signal is detected in the PCM. Similarly, if there is no RPM signal, your injectors will not fire either. If the fuel pump relay is bad, you will still get injector fire (just nothing will come out); same goes for the module.
How does the Mitsubishi Eclipse fuel pump work?
The Mitsubishi Eclipse fuel pump utilizes two check valves to control fuel pressure and correct fuel flow through the gas lines. Different recalls on the Eclipse affect the operation fuel pump check valve. Once the fuel pump check valves begin to have problems, different symptoms develop in the performance of the Eclipse engine.
Why is my Mitsubishi Eclipse not firing properly?
This hesitation is caused by the fuel pump check valve not opening and closing properly. The Mitsubishi Eclipse engine misfiring is a sure symptom of a faulty fuel pump check valve. Fuel or gasoline is not being sent to the cylinders or not enough fuel is being sent to the cylinders so the firing sequence is interrupted.
The relay module is located on exactly the opposite location, in the driver side of the console, again below the radio area mounted behind the carpet. My concern at this point would not be so much about the fuel pump not coming on, but that you are not getting injector pulse either.
If the crank sensor goes out, you will have no spark, no fuel, and no injector pulse. Similarly if key power lines are down to the PCM (via fuse or MFI relay failure), there will be no reference voltages, and therefor no spark, no injector fire